English  |
I.C.T
PCB Cleaning Machine
| Quantity: | |
|---|---|
| Dependable PCB Jet Cleaning Machine
Electronics plants rely on the I.C.T-800 pcb jet cleaning machine when they need steady, complete removal of solder paste from stencils, red glue from masks, flux from misprinted boards, and residues from large PCBAs. The full process takes place inside a single chamber: aqueous detergent wash, DI water rinse, and hot air drying. Four fixed spray rods and four air knives stay in place while the stencil travels back and forth, delivering even coverage without stressing the frame. Heating brings detergent to the right temperature, stirring keeps it uniform, filters guard against particles, and resistivity monitoring confirms rinse purity. This pcb jet cleaning machine improves stencil life, raises print quality, cuts defects, and reduces costs in active SMT lines. It also functions as a pcb pre cleaning machine for certain boards.
| Feature
Reliable delivery starts with the supply system inside the pcb jet cleaning machine. A high-power motor and diaphragm pump combine to spray fluid forcefully and pull it back quickly for reuse. Quick-connect fittings on every pneumatic line make routine checks fast and simple. Pipeline joints snap open for immediate part changes. Angle seat valves at key spots let the same loop handle both filling and recovery without extra piping. Clear flow markings on the lines prevent mistakes during daily operation. These details keep the system dependable and easy to service, so production stays steady even during long runs.
The cleaning system in this pcb jet cleaning machine works with purpose. Four fixed spray bars and four air knives apply steady pressure while the stencil rack moves back and forth under stepper motor control, reaching every surface thoroughly. Adjustable clamps hold different stencil sizes securely and allow quick swaps. Bottom guide channels with pulleys stop water from pooling, making it simple to load and unload parts. Double-sealed doors plus a recovery tank keep residual liquid away from the entrance area. The setup cleans not only stencils but also solder paste, red glue, and flux from copper masks, resin plates, misprinted PCBs, and large PCBAs.
Large storage tanks support smooth work in the pcb jet cleaning machine. Two 60-liter vessels—one for detergent, one for rinse—reduce the need for frequent refills. Built-in heaters raise aqueous fluid to 60°C when needed for stronger action. Temperature probes let operators set exact levels, and four curved stirring blades mix everything evenly. Liquid level sensors give clear sound and light alerts when supplies drop. Precision filters clean the fluid before spraying and again during return, protecting both parts and liquid from buildup. This tank design keeps the machine running longer with the same high performance.
Practical control defines the pcb jet cleaning machine. An English color touch screen links to PLC logic so operators can set and watch every detail. Cleaning temperature, wash time, rinse cycles, rinse heat, hot air dry duration and temperature, and water resistivity all adjust and display in real time. Imported brand parts provide steady reliability. Electrical and pneumatic boxes sit apart to avoid any interference. The layout meets CE and UL rules, easing everyday maintenance and safety checks. Clear settings like these produce the same good results cycle after cycle and give users full confidence.
| Comparison Before and After
| Specification
| Parameter | I.C.T-750 (Pneumatic) | I.C.T-800 (Auto Aqueous) |
|---|---|---|
| Power Source | Compressed air only (no electricity) | Electric (AC380V, 3-phase, 33KW total) |
| Max Stencil Size | L750 × W750 × H40 mm | L750 × W750 × H40 mm |
| Cleaning Method | 360° rotation spray + air blow dry | 4 fixed spray rods + 4 air knives, stencil moves back & forth |
| Cleaning Liquid | Solvent or aqueous (both supported) | Aqueous detergent only |
| Liquid Tank Capacity | 40 L | 60 L × 2 (cleaning + rinse) |
| Cleaning Time | 2–4 minutes | 2–5 minutes |
| Drying Time | 2–5 minutes | 3–5 minutes (hot air) |
| Heating Function | No heating (room temperature) | Yes (detergent up to 60°C, hot air up to 90°C) |
| SMT Line Equipment List
For a complete PCB Assembly Line, I.C.T offers key machines like SMT stencil printers, solder paste inspection, high-speed SMT machine, 8 zone reflow oven, 3d AOI inspection, PCB conveyors, and stencil washing machine. These work together to create efficient, high-quality SMT assembly. For DIP assembly lines, we provide selective wave soldering machines and wave soldering equipment to handle through-hole components with precision and reliability. Whether building SMT, DIP, or mixed lines, I.C.T supplies matched equipment and full support for smooth production.
| Customer Success Video
I.C.T finished a strong overseas job for a North American beauty instrument maker by handling complete installation and Factory Acceptance Testing on two full SMT production lines. The work met every acceptance standard on time and without issues. The lines included laser marking machines, SMT printers with SPI, Panasonic mounters, Heller reflow ovens, AOI inspection systems, PCB conveyors, PCBA cleaners, and automatic solder paste storage-thawing units. Our engineers stayed on site for setup, hands-on training, and final adjustments until the lines ran at full speed. This project built lasting trust in I.C.T for delivering quality SMT support across borders.
| Service and Training
I.C.T supplies complete help so customers get the most from their pcb jet cleaning machine and entire production lines. Trained engineers go anywhere in the world for on-site installation, startup, and practical training. They teach daily operation, regular upkeep, fine-tuning of settings, and quick fixes for common problems. Remote support answers questions fast, usually the same day. We also share tips on process changes that raise output and lower expenses. With more than 25 years of focused experience, our team stays ready to assist long after delivery, letting factories stay focused on making products while we manage equipment care and improvement.
| Customer Reviews
Clients often thank our engineers for their clear knowledge, calm help during installation, and quick fixes to any questions. Many highlight the pcb jet cleaning machine for steady work, excellent cleaning, and big savings on supplies. Several mention the strong packaging and safe shipping that brought machines in perfect shape after long trips. Fast replies and open talk earn special notice. In short, people see I.C.T as a steady partner that pairs good machines with honest, ongoing service.
| Our Certification
The I.C.T-800 pcb jet cleaning machine carries important global approvals. CE marking confirms it meets European safety rules, RoHS limits harmful materials for better environmental care, and ISO9001 covers our complete quality system. Several patents protect special features such as the fixed spray rods and moving stencil. These certifications and patents show our focus on safe, clean, and smart design. Buyers know the equipment follows strict worldwide standards for performance and responsibility.
| About Us and Factory
I.C.T creates full SMT solutions with its own research, development, and manufacturing in Dongguan. Since 2012 the company has grown to 89 people, including 20 engineers, inside 12,000 square meters. Registered capital of $30 million supports eight branch offices worldwide. We have helped more than 1,600 customers in 72 countries and learned how to meet different technical needs and local conditions. Strict tests and a full quality system run through every step of production. We deliver solid machines and complete support so partners can build or improve their lines with confidence.
