English  |
I.C.T
| Quantity: | |
|---|---|
| Semi-Automated Screw Tightening for Assembly
The manual screw tightening robot is made for factories that need faster and more stable screw tightening than hand operation. The machine includes two main parts: an electric screwdriver and an automatic screw feeder. These two units work together to move screws and complete tightening in one smooth process. After one screw is locked, the screwdriver lifts and the next screw is supplied automatically. This helps operators avoid repeated screw picking and keeps the working rhythm more stable. It is suitable for electronic modules, control boards, plastic housings, lighting parts, and products with many repeated screw positions.
| Feature of Automatic Screwing Robot
Easy Programming
The screw feeding system helps reduce small but repeated manual actions in assembly work. When workers pick screws by hand, the process can become slow and unstable, especially during long shifts. This manual screw machine Drive for tighten robot sends the screw to the tightening position automatically, so the operator can focus on loading and unloading the fixture. It supports continuous work when the screw type and product position are fixed. For factories handling many similar products, this design helps save time, reduce hand fatigue, and keep the workstation cleaner.
The electric screwdriver is the key unit for stable tightening. It works with the feeder and motion system to complete repeated fastening points according to the saved program. A screw tighten tool screw tighten robot needs smooth movement, proper positioning, and stable screwdriver action. This machine can work with screwdriver options such as SD, KILEWS, or HIOS, depending on project needs. With repeat accuracy up to ±0.02 mm, the manual screw tightening robot helps reduce position errors and supports more consistent tightening quality for small electronic products and assembled parts.
Good screw tightening depends not only on the driver, but also on how the product is held. I.C.T can design fixtures according to the Customer’s product shape, screw location, loading method, and assembly order. Some products need a simple flat fixture, while others need special support to avoid movement during tightening. A screw tightening robot janome style application may focus on precise position control, but real production also needs stable product holding. With the right fixture design, operators can load parts faster and the machine can repeat each tightening point more reliably.
The manual screw tightening robot supports touch panel operation and handheld teaching programming. Operators can set screw positions, save production programs, and recall them when the same product returns to the line. The machine can store up to 999 programs, which is useful for factories with different product models. The alarm system can also help identify abnormal situations, such as stripped screws. For a screw drive for robot project, easy program control matters because it lowers training pressure, supports faster product changeover, and helps the production team keep daily work more organized.
| Automatic Screwing Robot Specification
| Item | I.C.T-SCR300 | I.C.T-SCR540 | I.C.T-SCR640 |
|---|---|---|---|
| Max. Range Size | 300 × 300 mm, Z: 80 mm | 500 × 400 mm, Z: 80 mm | 600 × 400 mm, Z: 80 mm |
| Head Number | 1 | 1 | 2 |
| Platform Number | 1 | 2 | 2 |
| Max Move Speed | X/Y axis: 600 mm/s, Z axis: 400 mm/s | X/Y axis: 600 mm/s, Z axis: 400 mm/s | X/Y axis: 600 mm/s, Z axis: 400 mm/s |
| Screwdriver | SD / KILEWS / HIOS | SD / KILEWS / HIOS | SD / KILEWS / HIOS |
| Screw Feeding | Pick and Place, Magnetic | Pick and Place, Magnetic | Pick and Place, Magnetic |
| Alarm System | Stripped Alarm | Stripped Alarm | Stripped Alarm |
| Repeat Accuracy | ±0.02 mm | ±0.02 mm | ±0.02 mm |
| Memory | 999 Programs | 999 Programs | 999 Programs |
| Programming | Traction Teaching Program | Traction Teaching Program | Traction Teaching Program |
| Driving Mode | Closed-loop Motor | Closed-loop Motor | Closed-loop Motor |
| Control Mode | Demonstrator + Touch Panel | Demonstrator + Touch Panel | Demonstrator + Touch Panel |
| Air Pressure | 4.5–6 kg/cm² | 4.5–6 kg/cm² | 4.5–6 kg/cm² |
| Power Supply | AC 220 ±10%, 50/60 Hz; AC 110V optional | AC 220 ±10%, 50/60 Hz; AC 110V optional | AC 220 ±10%, 50/60 Hz; AC 110V optional |
| Dimension | 670 × 540 × 690 mm | 670 × 590 × 690 mm | 1010 × 730 × 690 mm |
| Weight | Approx. 70 kg | Approx. 90 kg | Approx. 130 kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| DIP Line Equipment List
A full DIP line is used for through-hole component assembly after SMT production. It can include manual insertion conveyors, automatic insertion machines, wave soldering machines, selective soldering machines, DIP AOI, soldering robots, PCB loaders, unloaders, cooling conveyors, and other handling machines. Each machine supports a clear process step, from component insertion to soldering, inspection, transfer, and final handling. I.C.T helps Customers plan the DIP line according to board size, component type, production output, factory layout, and operator arrangement. A well-planned DIP line makes the production flow easier to control and more suitable for batch manufacturing.
| Product Name | Purpose in DIP Line |
|---|---|
| Automatic Insert Machine | Automatically places components onto PCBs with precision for DIP production line. |
Melts solder to form solid joints on PCBs during THT plug-in process. | |
Applies solder selectively to specific areas for accurate THT assembly | |
Inspects solder joints and placement defects on DIP assembled PCB. | |
Board input machine and board output machine | |
| DIP Peripheral | Peripheral products of DIP production line |
| Customer Success Video
In April 2026, an I.C.T engineer traveled to Portugal to finish on-site installation and training for a full SMT production line used in automotive electronics. The Customer’s products included car lighting boards and control system PCBAs, so stable line setup and practical operator training were important. During the project, our engineer supported equipment placement, line connection, machine adjustment, operation guidance, and basic production startup. The Customer shared positive feedback on the equipment and the training process. They said the setup went smoothly and the guidance was clear. This project shows that I.C.T can support Customers from machine delivery to real factory production, not just provide equipment.
| Professional Training & Support
I.C.T supports Customers from early technical communication to final production startup. Before recommending a machine, our team can review the Customer’s product size, screw type, process flow, fixture needs, output target, and factory layout. For single equipment or complete production line projects, we can provide layout planning, machine selection, utility preparation, and process connection advice. After delivery, I.C.T engineers can provide on-site installation and training when needed. Training usually covers machine startup, program setting, fixture loading, alarm handling, daily maintenance, and basic troubleshooting. This helps the Customer’s team understand the equipment clearly and build more confidence in daily operation.
| Customer Praise
Customers often give positive comments on I.C.T engineers, equipment stability, packaging quality, and response speed. During overseas projects, our engineers explain operation steps in a simple and practical way, so local teams can learn faster. Customers also value our careful packing for long-distance shipment, including moisture protection, shock protection, wooden cases, and firm machine fixing. After installation, when questions happen, I.C.T responds through online messages, video calls, and remote guidance. This helps Customers solve issues earlier and reduce unnecessary production delays. Fast support is simple, but in factory life, it really hits different.
| Our Certification
I.C.T supports production line projects with certificates such as CE, RoHS, ISO9001, and related patents, depending on machine type and project scope. These certificates reflect our attention to safety requirements, environmental standards, quality management, and technical development. At the same time, our factory follows internal quality inspection before shipment. Machines are checked through mechanical assembly review, electrical inspection, function testing, and packing confirmation. For Customers buying SMT line screw machine equipment, DIP line equipment, or related assembly machines, this quality process helps reduce installation risk and supports long-term production use.
| About Us and Factory
I.C.T is a manufacturer and full factory solution provider for electronics manufacturing. We have our own R&D, production, engineering, sales, and service teams, and our company has grown quickly through many global projects. I.C.T has served many Customers across different countries and industries, including automotive electronics, LED products, consumer electronics, communication devices, industrial control, and power electronics. Our factory follows strict production and testing procedures from design to shipment. Each project is managed with practical machine selection, careful inspection, and long-term technical support. I.C.T focuses on helping Customers build stable production capacity step by step.
