English  |
I.C.T-W2
I.C.T
| Quantity: | |
|---|---|
| Middle Size Wave Soldering Machine
– Leading Soldering Equipment Market in China
I.C.T W-series middle size wave soldering machine is the flagship product among wave soldering machines china, specially built for medium to high-volume THT factories that demand high quality at reasonable cost. This middle size wave soldering machine combines Japanese Kuroda precision nozzle for uniform flux spray, fully independent horizontal heating zones for perfect temperature control, and intelligent energy-saving design that runs at only 7kW. Optional wave soldering machine with nitrogen system meets the highest lead-free standards. Widely used in automotive electronics, smart meters and industrial controls, it has become the most popular middle size wave soldering machine in the soldering equipment market.
| Feature
Japanese Kuroda nozzle with adjustable atomizing area and pyramid filter deliver ultra-thin, even flux coating while reducing consumption by up to 60%. Digital flow control and pressure-stable tank keep performance perfect regardless of flux level – a major advantage for middle size wave soldering machine from wave soldering machines china.
Third-party over-temperature protection plus PLC+PID closed-loop control and emergency hardware cut-off form unbreakable safety system. Real-time monitoring protects operators and equipment during continuous operation in the soldering equipment market.
Fully independent horizontal heating zones with closed hot-air circulation and rectifier plates create absolutely uniform temperature across the board. Warm-up takes only 15 minutes and normal power stays at 7kW – the most cost-effective heating among middle size wave soldering machine with nitrogen options.
| DIP Line Equipment List
| Model | W4 | W3 | W2 |
| Dimension:(mm) | 4200X1250X1500 | 3600X1250X1500 | 2900X1160X1500 |
| Weight(kg) | Approx.1500kg | Approx.1200kg | Approx.790kg |
| Power Supply | 3P5W,380/220V 50Hz | 3P5W,380/220V 50Hz | 3P5W,380/220V 50Hz |
| Startup Power | 32kw | 24kw | 16kw |
| Operation Power | 12kw | 9kw | 7kw |
| Control System | PLC | ||
| Spray System | |||
| Transmission Method | Step motor | ||
| Spray Pressure | 0.25Mpa--0.4Mpa | ||
| lux flow | 10--100ml/min | ||
| Exhaust Diameter | Φ200mm | ||
| Exhaust Capacity | 25m3/min | ||
| Preheating System | |||
| Preheating Mode | Hot air | ||
| Control Mode | PID + SSR | ||
| Preheating Zone | 4 | 3 | 2 |
| Preheating Length | 1800mm | 1600mm | 1200mm |
| Preheating Temp. | (Room Temperature)-250°C | ||
| Warm-up Time(min) | Approx.15min (setting 150°C) | ||
| Conveyor System | |||
| PCB Size:LxW(mm) | Min:80x60mm; Max:400x300mm | ||
| Conveyor Speed | 0-2000(mm/min) | ||
| Conveyor Height | 750+/-20 (mm) | ||
| Finger | Double hook claw (Standard) | ||
| Conveyor width control | Manually | ||
| Conveyor Angle | 4~7degree | ||
| Soldering System | |||
| Solder Pot style | Mechanical Motor drive | ||
| Solder Pot Material | Full Titanium (Standard FT) | ||
| Solder pot temperature | 300°C | ||
| Solder pot capacity | Lead-free 350kg | Lead-free 300kg | Lead-free 250kg |
| Other | |||
| Finger cleaning system | Brush | ||
| DIP Line Equipment List
Our DIP production line offers advanced tools for efficient and precise PCB assembly. The fully automated DIP line includes a DIP insertion line for accurate component placement, a wave loader for smooth PCB entry, a wave unloader for safe exit, and an assembly belt line for final checks. This high-quality PCB DIP production line ensures stable operation, reliable THT insertion, and cost-effective assembly, meeting diverse industry needs. With modular designs and global support from I.C.T, it boosts productivity for through-hole tasks.
| Customer Success Video
A smart meter manufacturer in Uruguay purchased two complete production lines from I.C.T – one full SMT line and one DIP line. The SMT line includes loader, mounter 471/481, Lyra622, AOI and corner conveyor; the DIP line features W2 middle size wave soldering machine, multiple connecting tables, magazine belt line, roller conveyor and bullseye workstations. We dispatched two experienced engineers to the customer’s factory in Uruguay. Within two weeks they finished all equipment unloading, positioning, power connection, parameter setting and operator training. Both lines passed acceptance testing on the first run with zero defects. The customer quickly reached full production capacity and expressed high satisfaction with our one-stop delivery and on-site commissioning service. This project has become a classic full-line delivery case in Latin America.
| Expert Services and Training
Every middle size wave soldering machine order comes with a dedicated project manager who coordinates everything from factory layout design to final acceptance. We provide 15-day on-site training, lifetime spare parts support and 48-hour global parts delivery through 8 overseas warehouses – the strongest after-sales network among wave soldering machines china.
| Customer Praise
Customers in the soldering equipment market say our middle size wave soldering machine offers “the best value among all wave soldering machines china”. They praise the low electricity bill, rock-solid temperature stability, optional wave soldering machine with nitrogen performance, and how our engineers arrive within 72 hours anywhere in the world.
| Quality Certifications
All I.C.T middle size wave soldering machine models hold full CE, CCC, UL, RoHS and ISO9001 certificates plus multiple invention patents for the flux-saving nozzle and energy-efficient heating system – proof of top quality from wave soldering machines china.
| About I.C.T Company and Factory
Located in Dongguan with 12,000㎡ modern factory and 89 staff including 20 senior engineers, I.C.T designs and manufactures every middle size wave soldering machine completely in-house. With 8 overseas offices, local warehouses and flying engineers worldwide, we are the only Chinese brand that truly combines “Made in China” quality with “global localization” service – the fastest growing name in the soldering equipment market.
| Middle Size Wave Soldering Machine
– Leading Soldering Equipment Market in China
I.C.T W-series middle size wave soldering machine is the flagship product among wave soldering machines china, specially built for medium to high-volume THT factories that demand high quality at reasonable cost. This middle size wave soldering machine combines Japanese Kuroda precision nozzle for uniform flux spray, fully independent horizontal heating zones for perfect temperature control, and intelligent energy-saving design that runs at only 7kW. Optional wave soldering machine with nitrogen system meets the highest lead-free standards. Widely used in automotive electronics, smart meters and industrial controls, it has become the most popular middle size wave soldering machine in the soldering equipment market.
| Feature
Japanese Kuroda nozzle with adjustable atomizing area and pyramid filter deliver ultra-thin, even flux coating while reducing consumption by up to 60%. Digital flow control and pressure-stable tank keep performance perfect regardless of flux level – a major advantage for middle size wave soldering machine from wave soldering machines china.
Third-party over-temperature protection plus PLC+PID closed-loop control and emergency hardware cut-off form unbreakable safety system. Real-time monitoring protects operators and equipment during continuous operation in the soldering equipment market.
Fully independent horizontal heating zones with closed hot-air circulation and rectifier plates create absolutely uniform temperature across the board. Warm-up takes only 15 minutes and normal power stays at 7kW – the most cost-effective heating among middle size wave soldering machine with nitrogen options.
| DIP Line Equipment List
| Model | W4 | W3 | W2 |
| Dimension:(mm) | 4200X1250X1500 | 3600X1250X1500 | 2900X1160X1500 |
| Weight(kg) | Approx.1500kg | Approx.1200kg | Approx.790kg |
| Power Supply | 3P5W,380/220V 50Hz | 3P5W,380/220V 50Hz | 3P5W,380/220V 50Hz |
| Startup Power | 32kw | 24kw | 16kw |
| Operation Power | 12kw | 9kw | 7kw |
| Control System | PLC | ||
| Spray System | |||
| Transmission Method | Step motor | ||
| Spray Pressure | 0.25Mpa--0.4Mpa | ||
| lux flow | 10--100ml/min | ||
| Exhaust Diameter | Φ200mm | ||
| Exhaust Capacity | 25m3/min | ||
| Preheating System | |||
| Preheating Mode | Hot air | ||
| Control Mode | PID + SSR | ||
| Preheating Zone | 4 | 3 | 2 |
| Preheating Length | 1800mm | 1600mm | 1200mm |
| Preheating Temp. | (Room Temperature)-250°C | ||
| Warm-up Time(min) | Approx.15min (setting 150°C) | ||
| Conveyor System | |||
| PCB Size:LxW(mm) | Min:80x60mm; Max:400x300mm | ||
| Conveyor Speed | 0-2000(mm/min) | ||
| Conveyor Height | 750+/-20 (mm) | ||
| Finger | Double hook claw (Standard) | ||
| Conveyor width control | Manually | ||
| Conveyor Angle | 4~7degree | ||
| Soldering System | |||
| Solder Pot style | Mechanical Motor drive | ||
| Solder Pot Material | Full Titanium (Standard FT) | ||
| Solder pot temperature | 300°C | ||
| Solder pot capacity | Lead-free 350kg | Lead-free 300kg | Lead-free 250kg |
| Other | |||
| Finger cleaning system | Brush | ||
| DIP Line Equipment List
Our DIP production line offers advanced tools for efficient and precise PCB assembly. The fully automated DIP line includes a DIP insertion line for accurate component placement, a wave loader for smooth PCB entry, a wave unloader for safe exit, and an assembly belt line for final checks. This high-quality PCB DIP production line ensures stable operation, reliable THT insertion, and cost-effective assembly, meeting diverse industry needs. With modular designs and global support from I.C.T, it boosts productivity for through-hole tasks.
| Customer Success Video
A smart meter manufacturer in Uruguay purchased two complete production lines from I.C.T – one full SMT line and one DIP line. The SMT line includes loader, mounter 471/481, Lyra622, AOI and corner conveyor; the DIP line features W2 middle size wave soldering machine, multiple connecting tables, magazine belt line, roller conveyor and bullseye workstations. We dispatched two experienced engineers to the customer’s factory in Uruguay. Within two weeks they finished all equipment unloading, positioning, power connection, parameter setting and operator training. Both lines passed acceptance testing on the first run with zero defects. The customer quickly reached full production capacity and expressed high satisfaction with our one-stop delivery and on-site commissioning service. This project has become a classic full-line delivery case in Latin America.
| Expert Services and Training
Every middle size wave soldering machine order comes with a dedicated project manager who coordinates everything from factory layout design to final acceptance. We provide 15-day on-site training, lifetime spare parts support and 48-hour global parts delivery through 8 overseas warehouses – the strongest after-sales network among wave soldering machines china.
| Customer Praise
Customers in the soldering equipment market say our middle size wave soldering machine offers “the best value among all wave soldering machines china”. They praise the low electricity bill, rock-solid temperature stability, optional wave soldering machine with nitrogen performance, and how our engineers arrive within 72 hours anywhere in the world.
| Quality Certifications
All I.C.T middle size wave soldering machine models hold full CE, CCC, UL, RoHS and ISO9001 certificates plus multiple invention patents for the flux-saving nozzle and energy-efficient heating system – proof of top quality from wave soldering machines china.
| About I.C.T Company and Factory
Located in Dongguan with 12,000㎡ modern factory and 89 staff including 20 senior engineers, I.C.T designs and manufactures every middle size wave soldering machine completely in-house. With 8 overseas offices, local warehouses and flying engineers worldwide, we are the only Chinese brand that truly combines “Made in China” quality with “global localization” service – the fastest growing name in the soldering equipment market.
