English  |
Acrab350
I.C.T
| Quantity: | |
|---|---|
| I.C.T Acrab-Series Wave Soldering
The Acrab series wave soldering is designed for factories that need to handle everything from small consumer boards to Wave Soldering Machine for Large PCB Parts used in automotive and industrial equipment. Three models cover 350 mm, 450 mm, and 615 mm width. It integrates Wave Soldering Machine with Flux, long preheating, ultra-stable dual wave, and modular options (nitrogen, top preheat, electric width). Operating power stays at 8-10 kW. Tool-free maintenance keeps the entire pcb wave soldering machine line running with almost no downtime.
| Feature
The full spray assembly slides forward on rails. Two Japanese Kuroda nozzles, controlled by stepper motors, deliver programmable flux volume, angle, width, and density. All parameters are saved and repeatable. Automatic cleaning cycle and 316 stainless steel construction keep the chamber spotless. The Wave Soldering Machine with Flux is ready for the next board in seconds.
Three independent zones total 1800 mm length. Hot air convection plus infrared tubes bring the tunnel to 250 ℃ in fifteen minutes. High-temperature insulation cotton maintains ±2 ℃ across the entire board surface. Each zone uses plug-in drawer design — heaters replace without tools. Optional top preheat module installs instantly for extra-thick boards.
Precision chain and heavy-duty double-hook titanium fingers transport boards up to 615 mm wide without dropping. Patented synchronous entry device guarantees smooth transfer from the loader. Conveyor speed accuracy ±2 mm/min. Fingers self-clean during operation. Width adjustment manual or electric. This system makes the pcb wave soldering machine perfect for mixed production.
One-piece cast-iron pot with enamel coating holds 500-700 kg lead-free solder and never deforms. Dual wave height variation under 0.5 mm. Automatic dross return channel removes waste continuously. Optional nitrogen system reduces oxidation dramatically. Joints come out bright and full. The Wave Soldering Machine for Large PCB Parts delivers automotive-grade quality every cycle.
High-power top convection fans activate immediately after the wave. Optional bottom forced cooling handles multi-layer boards. PCB temperature drops rapidly without thermal shock. Solder surface freezes smooth and shiny. Boards exit cool enough for manual handling. The wave soldering process ends with zero defects and zero component stress.
Large touchscreen shows real-time temperature curves. PC+PLC with PID+SSR control locks parameters exactly. Standby mode reduces tin oxidation during pauses. Complete alarm history and emergency manual transmission. CE/UL certified. Operators master the pcb wave soldering machine in one shift and run it confidently for years.
| DIP Line Equipment List
| Model | Acrab 350 | Acrab 450 |
| Dimension(mm) | 4420X1420X1750 | 4420X1520X1750 |
| Power Supply | 3P5W,380/220V 50Hz | 3P5W,380/220V 50Hz |
| Startup Power | 33kw | 33kw |
| Operation Power | 8kw | 8kw |
| Control System | PC+PLC | PC+PLC |
| Preheating Zone | 3 | 3 |
| Preheating Length | 1800mm | 1800mm |
| Preheating Temp. | (Room Temperature)-250°C | (Room Temperature)-250°C |
| PCB Width(mm) | 50-350mm | 50-450mm |
| Finger | Spring Pressing Finger (Standard); Option:Spring Pressing Finger, Duck Mouth Finger | |
| Solder Pot Capacity | Lead-free 500kg | |
| Machine Weight(kg) | Approx.1600kg | Approx.1900kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| DIP Line Equipment List
I.C.T provides a complete and flexible DIP production line for high-efficiency through-hole assembly. The system includes automatic insertion machine for precise component placement, wave loader and unloader for smooth PCB transfer, reliable wave soldering machine, and assembly belt line for final inspection and testing. Modular design allows easy layout changes and future upgrades. With stable performance, low failure rate, and full support from I.C.T global team, this DIP line helps factories reduce labor cost, improve yield, and meet different production demands quickly.
| Product Name | Purpose in DIP Line |
|---|---|
| Automatic Insert Machine | Automatically places components onto PCBs with precision for DIP production line. |
Melts solder to form solid joints on PCBs during THT plug-in process. | |
Applies solder selectively to specific areas for accurate THT assembly | |
Inspects solder joints and placement defects on DIP assembled PCB. | |
Board input machine and board output machine | |
| DIP Peripheral | Peripheral products of DIP production line |
| Customer Success Video
In 2023, I.C.T successfully delivered a complete wave soldering line to a major automotive electronics manufacturer in Mexico. The package included the Acrab-350 wave soldering machine, wave loader, wave unloader, THT insertion equipment, and full conveyor system. Within two weeks of arrival, our engineers flew in to handle on-site installation, electrical connection, process debugging, and comprehensive operator training. After one week of intensive commissioning and parameter optimization, the entire line achieved stable 99.7 % first-pass yield on two different automotive PCBA types. The customer confirmed full acceptance and continues to rely on our local service team for ongoing support.
| Expert Services and Training
I.C.T offers genuine one-stop service: factory layout design, equipment delivery, installation, training, process optimization, spare parts supply, and lifetime technical support. Twenty engineers across eight overseas offices provide 24-hour response. Customers worldwide report higher yield, lower running cost, and complete confidence in our partnership.
| Customer Testimonials
Customers consistently praise I.C.T’s complete turnkey capability, immediate global technical support, reliable long-term equipment performance, thorough training programs, and partnership that continues long after delivery.
| Quality Certifications
Every I.C.T wave soldering machine carries CE, RoHS, ISO9001:2015 certification and multiple invention patents. Each unit undergoes 72-hour full-load testing plus detailed quality inspection in our Dongguan factory before shipment.
| About I.C.T Company and Factory
Established in 2012 in Dongguan, China, I.C.T has grown into a trusted full-factory solution partner for SMT and DIP production. Nearly 90 employees and 20 engineers operate from a modern 12,000 m² facility. We design and manufacture core equipment in-house, serve more than 25 years of combined industry experience, serving over 1,600 customers in 72 countries through eight overseas sales & service centers. From single wave soldering station to complete turnkey lines, we stay with customers from day one to the last board.
| I.C.T Acrab-Series Wave Soldering
The Acrab series wave soldering is designed for factories that need to handle everything from small consumer boards to Wave Soldering Machine for Large PCB Parts used in automotive and industrial equipment. Three models cover 350 mm, 450 mm, and 615 mm width. It integrates Wave Soldering Machine with Flux, long preheating, ultra-stable dual wave, and modular options (nitrogen, top preheat, electric width). Operating power stays at 8-10 kW. Tool-free maintenance keeps the entire pcb wave soldering machine line running with almost no downtime.
| Feature
The full spray assembly slides forward on rails. Two Japanese Kuroda nozzles, controlled by stepper motors, deliver programmable flux volume, angle, width, and density. All parameters are saved and repeatable. Automatic cleaning cycle and 316 stainless steel construction keep the chamber spotless. The Wave Soldering Machine with Flux is ready for the next board in seconds.
Three independent zones total 1800 mm length. Hot air convection plus infrared tubes bring the tunnel to 250 ℃ in fifteen minutes. High-temperature insulation cotton maintains ±2 ℃ across the entire board surface. Each zone uses plug-in drawer design — heaters replace without tools. Optional top preheat module installs instantly for extra-thick boards.
Precision chain and heavy-duty double-hook titanium fingers transport boards up to 615 mm wide without dropping. Patented synchronous entry device guarantees smooth transfer from the loader. Conveyor speed accuracy ±2 mm/min. Fingers self-clean during operation. Width adjustment manual or electric. This system makes the pcb wave soldering machine perfect for mixed production.
One-piece cast-iron pot with enamel coating holds 500-700 kg lead-free solder and never deforms. Dual wave height variation under 0.5 mm. Automatic dross return channel removes waste continuously. Optional nitrogen system reduces oxidation dramatically. Joints come out bright and full. The Wave Soldering Machine for Large PCB Parts delivers automotive-grade quality every cycle.
High-power top convection fans activate immediately after the wave. Optional bottom forced cooling handles multi-layer boards. PCB temperature drops rapidly without thermal shock. Solder surface freezes smooth and shiny. Boards exit cool enough for manual handling. The wave soldering process ends with zero defects and zero component stress.
Large touchscreen shows real-time temperature curves. PC+PLC with PID+SSR control locks parameters exactly. Standby mode reduces tin oxidation during pauses. Complete alarm history and emergency manual transmission. CE/UL certified. Operators master the pcb wave soldering machine in one shift and run it confidently for years.
| DIP Line Equipment List
| Model | Acrab 350 | Acrab 450 |
| Dimension(mm) | 4420X1420X1750 | 4420X1520X1750 |
| Power Supply | 3P5W,380/220V 50Hz | 3P5W,380/220V 50Hz |
| Startup Power | 33kw | 33kw |
| Operation Power | 8kw | 8kw |
| Control System | PC+PLC | PC+PLC |
| Preheating Zone | 3 | 3 |
| Preheating Length | 1800mm | 1800mm |
| Preheating Temp. | (Room Temperature)-250°C | (Room Temperature)-250°C |
| PCB Width(mm) | 50-350mm | 50-450mm |
| Finger | Spring Pressing Finger (Standard); Option:Spring Pressing Finger, Duck Mouth Finger | |
| Solder Pot Capacity | Lead-free 500kg | |
| Machine Weight(kg) | Approx.1600kg | Approx.1900kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| DIP Line Equipment List
I.C.T provides a complete and flexible DIP production line for high-efficiency through-hole assembly. The system includes automatic insertion machine for precise component placement, wave loader and unloader for smooth PCB transfer, reliable wave soldering machine, and assembly belt line for final inspection and testing. Modular design allows easy layout changes and future upgrades. With stable performance, low failure rate, and full support from I.C.T global team, this DIP line helps factories reduce labor cost, improve yield, and meet different production demands quickly.
| Product Name | Purpose in DIP Line |
|---|---|
| Automatic Insert Machine | Automatically places components onto PCBs with precision for DIP production line. |
Melts solder to form solid joints on PCBs during THT plug-in process. | |
Applies solder selectively to specific areas for accurate THT assembly | |
Inspects solder joints and placement defects on DIP assembled PCB. | |
Board input machine and board output machine | |
| DIP Peripheral | Peripheral products of DIP production line |
| Customer Success Video
In 2023, I.C.T successfully delivered a complete wave soldering line to a major automotive electronics manufacturer in Mexico. The package included the Acrab-350 wave soldering machine, wave loader, wave unloader, THT insertion equipment, and full conveyor system. Within two weeks of arrival, our engineers flew in to handle on-site installation, electrical connection, process debugging, and comprehensive operator training. After one week of intensive commissioning and parameter optimization, the entire line achieved stable 99.7 % first-pass yield on two different automotive PCBA types. The customer confirmed full acceptance and continues to rely on our local service team for ongoing support.
| Expert Services and Training
I.C.T offers genuine one-stop service: factory layout design, equipment delivery, installation, training, process optimization, spare parts supply, and lifetime technical support. Twenty engineers across eight overseas offices provide 24-hour response. Customers worldwide report higher yield, lower running cost, and complete confidence in our partnership.
| Customer Testimonials
Customers consistently praise I.C.T’s complete turnkey capability, immediate global technical support, reliable long-term equipment performance, thorough training programs, and partnership that continues long after delivery.
| Quality Certifications
Every I.C.T wave soldering machine carries CE, RoHS, ISO9001:2015 certification and multiple invention patents. Each unit undergoes 72-hour full-load testing plus detailed quality inspection in our Dongguan factory before shipment.
| About I.C.T Company and Factory
Established in 2012 in Dongguan, China, I.C.T has grown into a trusted full-factory solution partner for SMT and DIP production. Nearly 90 employees and 20 engineers operate from a modern 12,000 m² facility. We design and manufacture core equipment in-house, serve more than 25 years of combined industry experience, serving over 1,600 customers in 72 countries through eight overseas sales & service centers. From single wave soldering station to complete turnkey lines, we stay with customers from day one to the last board.
