English  |
I.C.T-Acrab450
I.C.T
| Quantity: | |
|---|---|
| I.C.T Acrab-Series Dip Soldering
This dip soldering machine stands in the middle of THT lines and quietly changes everything. Three models accept 350, 450, or 615 mm boards straight from insertion stations. The flux sprayer dip soldering machine starts the process, long preheat prepares the pins, dual wave solders, cooling finishes. Optional nitrogen, top preheat, electric width — all ready for tomorrow. Operating power 8-10 kW. Tool-free drawers. DIP Wave Soldering Machine with Flux Sprayer that makes automatic array dipping machine work look easy.
| Feature
The spray drawer glides out on hidden rails. Two Japanese Kuroda nozzles wait inside, driven by stepper motors that never forget a number. Flux falls across the board in perfect silence. Flow, speed, angle — everything stays recorded. Auto-clean runs without asking. 316 stainless steel stays unmarked. Push the drawer closed and the dip soldering machine continues its patient work.
Three zones line up for 1800 mm. Hot air and infrared tubes begin their quiet labor. Fifteen minutes later the tunnel holds 250 ℃. Insulation cotton keeps every inch within two degrees. Each zone slides out alone — heaters change while the line keeps moving. Optional top preheat waits above, ready when thick boards arrive.
The chain moves forward without hurry. Double-hook titanium fingers close gently but firmly on 615 mm panels. Patented entry device guides each board from the loader. Speed stays exact within two millimeters per minute. Fingers clean themselves between cycles. Width changes by hand or motor. The conveyor feeds the dip soldering machine without ever interrupting the rhythm.
Cast-iron pot with enamel skin carries 500-700 kg lead-free tin. Dual wave rises and falls inside half a millimeter. Automatic dross channel removes waste without noise. Optional nitrogen blanket removes oxidation completely. Solder joints emerge bright and complete. The DIP Wave Soldering Machine with Flux Sprayer finishes what the automatic array dipping machine started.
Top high-power fans begin the instant boards leave the wave. Bottom fans join for multi-layer work. Temperature falls fast. Components stay calm. Solder hardens smooth. Boards exit cool enough to hold. No thermal damage appears. The dip soldering machine completes every cycle with quiet certainty.
The touchscreen shows honest numbers. PC and PLC watch temperature second by second. PID+SSR keeps curves perfect. Standby mode starts during pauses and saves tin. Alarm history opens with one touch. Emergency hand crank turns without power. New operators learn the flux sprayer dip soldering machine in one morning and run it without fear.
| DIP Line Equipment List
| Model | Acrab 350 | Acrab 450 |
| Dimension(mm) | 4420X1420X1750 | 4420X1520X1750 |
| Power Supply | 3P5W,380/220V 50Hz | 3P5W,380/220V 50Hz |
| Startup Power | 33kw | 33kw |
| Operation Power | 8kw | 8kw |
| Control System | PC+PLC | PC+PLC |
| Preheating Zone | 3 | 3 |
| Preheating Length | 1800mm | 1800mm |
| Preheating Temp. | (Room Temperature)-250°C | (Room Temperature)-250°C |
| PCB Width(mm) | 50-350mm | 50-450mm |
| Finger | Spring Pressing Finger (Standard); Option:Spring Pressing Finger, Duck Mouth Finger | |
| Solder Pot Capacity | Lead-free 500kg | |
| Machine Weight(kg) | Approx.1600kg | Approx.1900kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| DIP Line Equipment List
I.C.T provides a complete and flexible DIP production line for high-efficiency through-hole assembly. The system includes automatic insertion machine for precise component placement, wave loader and unloader for smooth PCB transfer, reliable wave soldering machine, and assembly belt line for final inspection and testing. Modular design allows easy layout changes and future upgrades. With stable performance, low failure rate, and full support from I.C.T global team, this DIP line helps factories reduce labor cost, improve yield, and meet different production demands quickly.
| Product Name | Purpose in DIP Line |
|---|---|
| Automatic Insert Machine | Automatically places components onto PCBs with precision for DIP production line. |
Melts solder to form solid joints on PCBs during THT plug-in process. | |
Applies solder selectively to specific areas for accurate THT assembly | |
Inspects solder joints and placement defects on DIP assembled PCB. | |
Board input machine and board output machine | |
| DIP Peripheral | Peripheral products of DIP production line |
| Customer Success Video
In 2023, I.C.T successfully delivered a complete automatic wave soldering line to a major automotive electronics manufacturer in Mexico. The package included Acrab-450 automatic wave soldering machine, wave loader, wave unloader, THT insertion equipment, and full conveyor system. Within two weeks of arrival, our engineers flew in to handle on-site installation, electrical connection, process debugging, and comprehensive operator training. After one week of intensive commissioning and parameter optimization, the entire line achieved stable 99.7 % first-pass yield on two different automotive PCBA types. The customer confirmed full acceptance and continues to rely on our local service team for ongoing support.
| Expert Services and Training
I.C.T offers complete one-stop service covering line planning, equipment supply, installation, training, process optimization, spare parts, and lifetime technical support. Twenty engineers in eight overseas offices respond 24 hours a day. Customers reach 99.5 % first-pass yield quickly and maintain it with our continued partnership.
| Customer Testimonials
Customers worldwide express strong satisfaction with I.C.T’s full one-stop service, immediate global technical support, reliable equipment performance, professional training programs, and long-term cooperation that builds real trust.
| Quality Certifications
Every I.C.T dip soldering machine carries CE, RoHS, ISO9001:2015 certification and multiple invention patents. Each unit completes 72-hour full-load testing and strict inspection in Dongguan before delivery.
| About I.C.T Company and Factory
Established in 2012 in Dongguan, China, I.C.T has become a highly influential full-factory solution partner in global electronics manufacturing. With nearly 90 employees and 20 engineers working in a modern 12,000 m² facility, we design and produce core equipment in-house. Serving more than 1,600 customers across 72 countries with eight overseas service centers, we provide demand analysis, program planning, training, process optimization, and lifelong support — building and upgrading SMT and DIP lines from 0 to 1 with zero-risk partnership.
| I.C.T Acrab-Series Dip Soldering
This dip soldering machine stands in the middle of THT lines and quietly changes everything. Three models accept 350, 450, or 615 mm boards straight from insertion stations. The flux sprayer dip soldering machine starts the process, long preheat prepares the pins, dual wave solders, cooling finishes. Optional nitrogen, top preheat, electric width — all ready for tomorrow. Operating power 8-10 kW. Tool-free drawers. DIP Wave Soldering Machine with Flux Sprayer that makes automatic array dipping machine work look easy.
| Feature
The spray drawer glides out on hidden rails. Two Japanese Kuroda nozzles wait inside, driven by stepper motors that never forget a number. Flux falls across the board in perfect silence. Flow, speed, angle — everything stays recorded. Auto-clean runs without asking. 316 stainless steel stays unmarked. Push the drawer closed and the dip soldering machine continues its patient work.
Three zones line up for 1800 mm. Hot air and infrared tubes begin their quiet labor. Fifteen minutes later the tunnel holds 250 ℃. Insulation cotton keeps every inch within two degrees. Each zone slides out alone — heaters change while the line keeps moving. Optional top preheat waits above, ready when thick boards arrive.
The chain moves forward without hurry. Double-hook titanium fingers close gently but firmly on 615 mm panels. Patented entry device guides each board from the loader. Speed stays exact within two millimeters per minute. Fingers clean themselves between cycles. Width changes by hand or motor. The conveyor feeds the dip soldering machine without ever interrupting the rhythm.
Cast-iron pot with enamel skin carries 500-700 kg lead-free tin. Dual wave rises and falls inside half a millimeter. Automatic dross channel removes waste without noise. Optional nitrogen blanket removes oxidation completely. Solder joints emerge bright and complete. The DIP Wave Soldering Machine with Flux Sprayer finishes what the automatic array dipping machine started.
Top high-power fans begin the instant boards leave the wave. Bottom fans join for multi-layer work. Temperature falls fast. Components stay calm. Solder hardens smooth. Boards exit cool enough to hold. No thermal damage appears. The dip soldering machine completes every cycle with quiet certainty.
The touchscreen shows honest numbers. PC and PLC watch temperature second by second. PID+SSR keeps curves perfect. Standby mode starts during pauses and saves tin. Alarm history opens with one touch. Emergency hand crank turns without power. New operators learn the flux sprayer dip soldering machine in one morning and run it without fear.
| DIP Line Equipment List
| Model | Acrab 350 | Acrab 450 |
| Dimension(mm) | 4420X1420X1750 | 4420X1520X1750 |
| Power Supply | 3P5W,380/220V 50Hz | 3P5W,380/220V 50Hz |
| Startup Power | 33kw | 33kw |
| Operation Power | 8kw | 8kw |
| Control System | PC+PLC | PC+PLC |
| Preheating Zone | 3 | 3 |
| Preheating Length | 1800mm | 1800mm |
| Preheating Temp. | (Room Temperature)-250°C | (Room Temperature)-250°C |
| PCB Width(mm) | 50-350mm | 50-450mm |
| Finger | Spring Pressing Finger (Standard); Option:Spring Pressing Finger, Duck Mouth Finger | |
| Solder Pot Capacity | Lead-free 500kg | |
| Machine Weight(kg) | Approx.1600kg | Approx.1900kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| DIP Line Equipment List
I.C.T provides a complete and flexible DIP production line for high-efficiency through-hole assembly. The system includes automatic insertion machine for precise component placement, wave loader and unloader for smooth PCB transfer, reliable wave soldering machine, and assembly belt line for final inspection and testing. Modular design allows easy layout changes and future upgrades. With stable performance, low failure rate, and full support from I.C.T global team, this DIP line helps factories reduce labor cost, improve yield, and meet different production demands quickly.
| Product Name | Purpose in DIP Line |
|---|---|
| Automatic Insert Machine | Automatically places components onto PCBs with precision for DIP production line. |
Melts solder to form solid joints on PCBs during THT plug-in process. | |
Applies solder selectively to specific areas for accurate THT assembly | |
Inspects solder joints and placement defects on DIP assembled PCB. | |
Board input machine and board output machine | |
| DIP Peripheral | Peripheral products of DIP production line |
| Customer Success Video
In 2023, I.C.T successfully delivered a complete automatic wave soldering line to a major automotive electronics manufacturer in Mexico. The package included Acrab-450 automatic wave soldering machine, wave loader, wave unloader, THT insertion equipment, and full conveyor system. Within two weeks of arrival, our engineers flew in to handle on-site installation, electrical connection, process debugging, and comprehensive operator training. After one week of intensive commissioning and parameter optimization, the entire line achieved stable 99.7 % first-pass yield on two different automotive PCBA types. The customer confirmed full acceptance and continues to rely on our local service team for ongoing support.
| Expert Services and Training
I.C.T offers complete one-stop service covering line planning, equipment supply, installation, training, process optimization, spare parts, and lifetime technical support. Twenty engineers in eight overseas offices respond 24 hours a day. Customers reach 99.5 % first-pass yield quickly and maintain it with our continued partnership.
| Customer Testimonials
Customers worldwide express strong satisfaction with I.C.T’s full one-stop service, immediate global technical support, reliable equipment performance, professional training programs, and long-term cooperation that builds real trust.
| Quality Certifications
Every I.C.T dip soldering machine carries CE, RoHS, ISO9001:2015 certification and multiple invention patents. Each unit completes 72-hour full-load testing and strict inspection in Dongguan before delivery.
| About I.C.T Company and Factory
Established in 2012 in Dongguan, China, I.C.T has become a highly influential full-factory solution partner in global electronics manufacturing. With nearly 90 employees and 20 engineers working in a modern 12,000 m² facility, we design and produce core equipment in-house. Serving more than 1,600 customers across 72 countries with eight overseas service centers, we provide demand analysis, program planning, training, process optimization, and lifelong support — building and upgrading SMT and DIP lines from 0 to 1 with zero-risk partnership.
