English  |
I.C.T-Acrab350
I.C.T
| Quantity: | |
|---|---|
| I.C.T Acrab-Series PCB Wave Solder Machine
For more than ten years this PCB Wave Solder Machine has moved boards through fire and tin in factories across the world. Three widths — 350, 450, 615 mm — fit every line. The long preheat tunnel and steady dual wave give clean joints on automotive boards day after day. Operation power stays around 8-10 kW. Maintenance takes minutes, not hours. Customers in seventy-two countries run it and sleep well at night.
| Feature
The spray module rolls out on rails. Inside, the Japanese Kuroda nozzle moves on a stepper motor and lays flux in a perfect mist. Flow, angle, width — everything is recorded and recorded. Automatic cleaning runs by itself. The chamber stays clean. Stainless steel parts resist acid. When the drawer closes, the PCB Wave Solder Machine is ready again.
Three zones stretch 1800 mm. Hot air and infrared work together. In fifteen minutes the tunnel reaches 250 ℃. Thick cotton holds the heat steady within two degrees. Each zone stands alone, so one never pulls the others down. Modules slide out like drawers. A man can change a heater without tools before coffee gets cold.
The chain runs smooth and true. Double-hook titanium fingers grip wide boards and heavy automotive panels. The patented entry device keeps every board from falling. Speed holds within two millimeters per minute. Fingers wash themselves while the line runs. Width changes by hand or motor. The conveyor never stops the PCB Wave Solder Machine.
The cast-iron pot, coated in enamel, carries 500 to 700 kg of tin without ever warping. Dual wave rises and falls less than half a millimeter. Automatic dross channel pulls waste away. Oxidation drops, joints come out bright and full. Tin lasts longer, money stays in the company. This is how a real PCB Wave Solder Machine should work.
Large fans blow from the top the moment boards leave the wave. Optional bottom fans join when boards are thick. Temperature falls fast. Components do not overheat. Solder freezes smooth and shiny. The board comes out cool enough to touch. No cracks never appear. The PCB Wave Solder Machine finishes its job clean.
The screen is simple. PC and PLC watch temperature in real time. PID keeps curves exact. When the line slows, the machine sleeps and saves tin. Alarms write down every fault. Emergency crank turns by hand if power fails. CE and UL marks sit on the panel. Any worker learns it in one shift and trusts it for life.
| DIP Line Equipment List
| Model | Acrab 350 | Acrab 450 |
| Dimension(mm) | 4420X1420X1750 | 4420X1520X1750 |
| Power Supply | 3P5W,380/220V 50Hz | 3P5W,380/220V 50Hz |
| Startup Power | 33kw | 33kw |
| Operation Power | 8kw | 8kw |
| Control System | PC+PLC | PC+PLC |
| Preheating Zone | 3 | 3 |
| Preheating Length | 1800mm | 1800mm |
| Preheating Temp. | (Room Temperature)-250°C | (Room Temperature)-250°C |
| PCB Width(mm) | 50-350mm | 50-450mm |
| Finger | Spring Pressing Finger (Standard); Option:Spring Pressing Finger, Duck Mouth Finger | |
| Solder Pot Capacity | Lead-free 500kg | |
| Machine Weight(kg) | Approx.1600kg | Approx.1900kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| DIP Line Equipment List
Start with high-speed insertion, move to wave loader, then the Acrab PCB Wave Solder Machine, wave unloader, and inspection belt. Everything connects. Boards flow smooth from start to finish. Modular design grows when production grows. Global service keeps the whole line running nearly 100 % uptime.
| Product Name | Purpose in DIP Line |
|---|---|
| Automatic Insert Machine | Automatically places components onto PCBs with precision for DIP production line. |
Melts solder to form solid joints on PCBs during THT plug-in process. | |
Applies solder selectively to specific areas for accurate THT assembly | |
Inspects solder joints and placement defects on DIP assembled PCB. | |
Board input machine and board output machine | |
| DIP Peripheral | Peripheral products of DIP production line |
| Customer Success Video
Our engineers flew to Mexico with tool bags. In one automotive plant the Acrab 350 PCB Wave Solder Machine now solders two different boards using only changed fixtures. No bridges, perfect fillets every time. The same factory runs our coating line and SS-540 selective unit without trouble. They filmed their thanks and sent the video.
| Expert Services and Training
We arrive, install, train, leave the line running perfect. Twenty engineers overseas. 24-hour online help. Spare parts ship the same day. Your operators reach 99.5 % first-pass yield in days. Then we keep coming back until the PCB Wave Solder Machine becomes part of your family.
| Customer Testimonials
“Packing is very safe and professional.” “Your engineers are patient and skilled; they solved all problems in two days.” “The wave soldering machine runs stably with almost no dross – real energy saving!” “Response speed is amazing; questions answered within one hour anytime.”
| Quality Certifications
CE. RoHS. ISO9001:2015. Invention patents. Every PCB Wave Solder Machine runs seventy-two hours at full load in Dongguan before it travels to your floor.
| About I.C.T Company and Factory
Since 2012 nearly ninety people in a 12,000 m² factory in Dongguan have built these machines with their own hands. We make the critical parts ourselves. More than 1,600 customers in seventy-two countries. Eight overseas offices. Twenty engineers always ready to fly. We are here for the long haul.
| I.C.T Acrab-Series PCB Wave Solder Machine
For more than ten years this PCB Wave Solder Machine has moved boards through fire and tin in factories across the world. Three widths — 350, 450, 615 mm — fit every line. The long preheat tunnel and steady dual wave give clean joints on automotive boards day after day. Operation power stays around 8-10 kW. Maintenance takes minutes, not hours. Customers in seventy-two countries run it and sleep well at night.
| Feature
The spray module rolls out on rails. Inside, the Japanese Kuroda nozzle moves on a stepper motor and lays flux in a perfect mist. Flow, angle, width — everything is recorded and recorded. Automatic cleaning runs by itself. The chamber stays clean. Stainless steel parts resist acid. When the drawer closes, the PCB Wave Solder Machine is ready again.
Three zones stretch 1800 mm. Hot air and infrared work together. In fifteen minutes the tunnel reaches 250 ℃. Thick cotton holds the heat steady within two degrees. Each zone stands alone, so one never pulls the others down. Modules slide out like drawers. A man can change a heater without tools before coffee gets cold.
The chain runs smooth and true. Double-hook titanium fingers grip wide boards and heavy automotive panels. The patented entry device keeps every board from falling. Speed holds within two millimeters per minute. Fingers wash themselves while the line runs. Width changes by hand or motor. The conveyor never stops the PCB Wave Solder Machine.
The cast-iron pot, coated in enamel, carries 500 to 700 kg of tin without ever warping. Dual wave rises and falls less than half a millimeter. Automatic dross channel pulls waste away. Oxidation drops, joints come out bright and full. Tin lasts longer, money stays in the company. This is how a real PCB Wave Solder Machine should work.
Large fans blow from the top the moment boards leave the wave. Optional bottom fans join when boards are thick. Temperature falls fast. Components do not overheat. Solder freezes smooth and shiny. The board comes out cool enough to touch. No cracks never appear. The PCB Wave Solder Machine finishes its job clean.
The screen is simple. PC and PLC watch temperature in real time. PID keeps curves exact. When the line slows, the machine sleeps and saves tin. Alarms write down every fault. Emergency crank turns by hand if power fails. CE and UL marks sit on the panel. Any worker learns it in one shift and trusts it for life.
| DIP Line Equipment List
| Model | Acrab 350 | Acrab 450 |
| Dimension(mm) | 4420X1420X1750 | 4420X1520X1750 |
| Power Supply | 3P5W,380/220V 50Hz | 3P5W,380/220V 50Hz |
| Startup Power | 33kw | 33kw |
| Operation Power | 8kw | 8kw |
| Control System | PC+PLC | PC+PLC |
| Preheating Zone | 3 | 3 |
| Preheating Length | 1800mm | 1800mm |
| Preheating Temp. | (Room Temperature)-250°C | (Room Temperature)-250°C |
| PCB Width(mm) | 50-350mm | 50-450mm |
| Finger | Spring Pressing Finger (Standard); Option:Spring Pressing Finger, Duck Mouth Finger | |
| Solder Pot Capacity | Lead-free 500kg | |
| Machine Weight(kg) | Approx.1600kg | Approx.1900kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| DIP Line Equipment List
Start with high-speed insertion, move to wave loader, then the Acrab PCB Wave Solder Machine, wave unloader, and inspection belt. Everything connects. Boards flow smooth from start to finish. Modular design grows when production grows. Global service keeps the whole line running nearly 100 % uptime.
| Product Name | Purpose in DIP Line |
|---|---|
| Automatic Insert Machine | Automatically places components onto PCBs with precision for DIP production line. |
Melts solder to form solid joints on PCBs during THT plug-in process. | |
Applies solder selectively to specific areas for accurate THT assembly | |
Inspects solder joints and placement defects on DIP assembled PCB. | |
Board input machine and board output machine | |
| DIP Peripheral | Peripheral products of DIP production line |
| Customer Success Video
Our engineers flew to Mexico with tool bags. In one automotive plant the Acrab 350 PCB Wave Solder Machine now solders two different boards using only changed fixtures. No bridges, perfect fillets every time. The same factory runs our coating line and SS-540 selective unit without trouble. They filmed their thanks and sent the video.
| Expert Services and Training
We arrive, install, train, leave the line running perfect. Twenty engineers overseas. 24-hour online help. Spare parts ship the same day. Your operators reach 99.5 % first-pass yield in days. Then we keep coming back until the PCB Wave Solder Machine becomes part of your family.
| Customer Testimonials
“Packing is very safe and professional.” “Your engineers are patient and skilled; they solved all problems in two days.” “The wave soldering machine runs stably with almost no dross – real energy saving!” “Response speed is amazing; questions answered within one hour anytime.”
| Quality Certifications
CE. RoHS. ISO9001:2015. Invention patents. Every PCB Wave Solder Machine runs seventy-two hours at full load in Dongguan before it travels to your floor.
| About I.C.T Company and Factory
Since 2012 nearly ninety people in a 12,000 m² factory in Dongguan have built these machines with their own hands. We make the critical parts ourselves. More than 1,600 customers in seventy-two countries. Eight overseas offices. Twenty engineers always ready to fly. We are here for the long haul.
