I.C.T UC-series
I.C.T
Availability: | |
---|---|
Quantity: | |
Features:
1.Digital temperature and timing controls — Allows operator to set temperature ,cleaning time.
2.304 stainless steel tanks — For maximum wear resistance and lifespan.
3.Free provided with baskets to holding the cleaning parts.
4.Transducer — sweep frequency cleaning action,each designed for specific cleaning applications , Transducer frequency is infinitely close and high stability.
5.Easy operation ,reduce the noise and heating time.
6.Inside control cabinet manufacture according to your requirement.
7.Tap water, alcohol or solvent can be used for cleaning.
Specification:
Features:
1.Digital temperature and timing controls — Allows operator to set temperature ,cleaning time.
2.304 stainless steel tanks — For maximum wear resistance and lifespan.
3.Free provided with baskets to holding the cleaning parts.
4.Transducer — sweep frequency cleaning action,each designed for specific cleaning applications , Transducer frequency is infinitely close and high stability.
5.Easy operation ,reduce the noise and heating time.
6.Inside control cabinet manufacture according to your requirement.
7.Tap water, alcohol or solvent can be used for cleaning.
Specification:
FAQ
A: Using an ultrasonic cleaner is highly recommended for effectively removing flux from PCBs. This method is considered one of the best practices in the electronics industry. Additionally, ultrasonic cleaners can also efficiently clean solder paste, fingerprint oils, marking inks, and various other contaminants that may be present on sensitive electronic components. Therefore, employing an ultrasonic cleaner is a reliable and versatile solution for maintaining the cleanliness and functionality of PCBs and other electronic devices.
A: The recommended temperature range for the Flux remover & PCB cleaner fluid is between 50 - 80 degrees centigrade. This fluid is a concentrated solution that needs to be diluted with water at a ratio of 10 parts cleaning fluid to 1 part water. In cases where the components are heavily soiled, the concentration can be increased to a ratio of 7 parts cleaning fluid to 1 part water. It is important to ensure that the ultrasonic cleaner's working temperature is set within the range of 50 - 80 degrees centigrade.
FAQ
A: Using an ultrasonic cleaner is highly recommended for effectively removing flux from PCBs. This method is considered one of the best practices in the electronics industry. Additionally, ultrasonic cleaners can also efficiently clean solder paste, fingerprint oils, marking inks, and various other contaminants that may be present on sensitive electronic components. Therefore, employing an ultrasonic cleaner is a reliable and versatile solution for maintaining the cleanliness and functionality of PCBs and other electronic devices.
A: The recommended temperature range for the Flux remover & PCB cleaner fluid is between 50 - 80 degrees centigrade. This fluid is a concentrated solution that needs to be diluted with water at a ratio of 10 parts cleaning fluid to 1 part water. In cases where the components are heavily soiled, the concentration can be increased to a ratio of 7 parts cleaning fluid to 1 part water. It is important to ensure that the ultrasonic cleaner's working temperature is set within the range of 50 - 80 degrees centigrade.
I.C.T - Our Company
About I.C.T:
I.C.T is a leading provider of factory planning solution. We have 3 wholly-owned factories, providing professional consultation and services for global customers. We have more than 22 years of eletronic overall solutions. We not only provide a complete set of equipment, but also provide full range of technical support and services, and give customers more reasonable professional advice. We help many customersv to set up factories in LED, TV, mobile phone, DVB, EMS and other indutries all over the world. We are to set up factories in LED, TV, mobile phone, DVB, EMS and other indutries all over the world. We are trustworthy.
Exhibition
I.C.T - Our Company
About I.C.T:
I.C.T is a leading provider of factory planning solution. We have 3 wholly-owned factories, providing professional consultation and services for global customers. We have more than 22 years of eletronic overall solutions. We not only provide a complete set of equipment, but also provide full range of technical support and services, and give customers more reasonable professional advice. We help many customersv to set up factories in LED, TV, mobile phone, DVB, EMS and other indutries all over the world. We are to set up factories in LED, TV, mobile phone, DVB, EMS and other indutries all over the world. We are trustworthy.
Exhibition
For SMT Factory Setup, We Can Do for You:
1. We Provide Full SMT Solution for You
2. We Provide Core Technology With Our Equipments
3. We Provide The Most Professional Tech Service
4. We Have Wealthy Experience on SMT Factory Setup
5. We Can Solve Any Question About SMT
For SMT Factory Setup, We Can Do for You:
1. We Provide Full SMT Solution for You
2. We Provide Core Technology With Our Equipments
3. We Provide The Most Professional Tech Service
4. We Have Wealthy Experience on SMT Factory Setup
5. We Can Solve Any Question About SMT