English  |
FX-3RA
JUKI
| Quantity: | |
|---|---|
The JUKI Pick And Place Machine FX-3RA is designed for electronics factories that need speed, stability, and repeatable placement quality. It is suitable for SMT production lines making control boards, computer-related boards, consumer electronics, communication products, and other PCB assemblies. This model focuses on high-speed component placement, helping factories improve output when the upstream printing process and downstream reflow process are well matched. For customers planning a complete SMT line, FX-3RA can work with loaders, stencil printers, SPI, conveyors, reflow ovens, AOI, and unloading systems. I.C.T helps customers select the right line configuration based on product type, board size, capacity target, and workshop layout.
FX-3RA is a JUKI High Speed Mounter made for fast SMT component placement. In production, the value of speed is not only shown in a catalog number. It also appears in how smoothly the line moves from solder paste printing to component mounting and then to reflow soldering. A fast mounter can help reduce waiting time when the full line is designed correctly. For factories producing large quantities of electronic boards, this kind of placement rhythm is important. It helps operators keep production organized and makes capacity planning easier. When supported by good feeders, clean programs, and stable process control, FX-3RA can become a strong placement section in an SMT line.
As an Automatic SMT Pick And Place Machine, FX-3RA helps reduce manual placement work and supports a more controlled PCB assembly process. Automatic operation is important for factories that want to improve consistency and reduce human errors during production. The machine can follow prepared placement programs and work with feeder systems to mount components onto the PCB at high speed. This is useful for products with many small SMD parts, where manual operation is not practical. In a complete SMT line, automatic placement also helps improve process repeatability. Operators can focus more on material preparation, program checking, inspection feedback, and line maintenance instead of doing unstable manual work.
A JUKI Pick And Place Machine should not be viewed as an isolated machine. Its real value depends on how well it is matched with the full SMT process. If solder paste printing is unstable, placement speed cannot solve the final quality problem. If reflow settings are poor, good placement may still lead to weak solder joints. For this reason, FX-3RA is best planned as part of a complete SMT line. I.C.T can help connect the placement process with printing, SPI checking, reflow soldering, AOI inspection, PCB routing, and cleaning. This full-line view helps customers build a production process that is easier to run, easier to inspect, and easier to improve.
FX-3RA can support high-speed placement for many PCB assembly applications. For electronics factories, stable placement affects more than one process step. It influences soldering quality, AOI inspection results, rework rate, and final product reliability. A High Speed SMT Placement Machine must keep the mounting process consistent while the factory handles different board models and production orders. This is especially important for customers making industrial boards, computer-related products, power control boards, or consumer electronic assemblies. With proper line setup and operator training, FX-3RA can help factories reduce repeated adjustment work and maintain a more predictable production result. Stable output is what makes daily factory operation less painful.
For customers who want to improve SMT output, the JUKI Pick And Place Machine FX-3RA can be used as part of a production upgrade plan. Some factories start with lower-capacity equipment and later need higher placement speed as orders increase. Others may already have an SMT line but want better machine matching and improved line flow. FX-3RA is suitable for customers who focus on fast placement and need a practical solution for SMT manufacturing. I.C.T can review current factory conditions, product range, capacity target, and process bottlenecks before recommending a line plan. This helps customers avoid blind equipment selection and build a more useful production system.
| Specification
| Item/Model | High-Speed Modular Mounter FX-3RAL | High-Speed Modular Mounter FX-3RAXL | |
| Board size | L size(410x360mm) | yes | no |
| L-Wide size(510x360mm)*1 | yes | no | |
| XL size(610×560mm) | no | yes | |
| Applicability to long PWB*1 | 800×360mm | 800×560mm | |
| Component height | 6mm | yes | |
| Component size | Laser recognition | 0402(01005) ~ 33.5mm×33.5mm | |
| Placement speed (chip) | Optimum | 0.040Sec. / chip(90,000CPH)*2 | |
| IPC9850 | 66,000CPH*2 | ||
| Placement accuracy | Laser recognition | ±0.05mm(±3σ) | |
| Feeder inputs | Max.240 in case of 8mm tape (on a Electric double tape feeder) | ||
*1 L-Wide size , Applicability to long PWB is optional. * Contact I.C.T for details. | SMT Line Equipment List
|
