English  |
I.C.T-750
I.C.T
PCB Cleaning Machine
| Quantity: | |
|---|---|
| Dependable SMT Stencil Cleaner
Factories choose the I.C.T-750 SMT Stencil Cleaner when they need reliable removal of solder paste or red glue from printing stencils. It works entirely on compressed air so no electricity is required. Patented 360° rotation spray rods clean every opening thoroughly while protecting stencil tension. One button runs the full automatic clean and dry process. Liquid recycles through three-level filters to save costs. Famous pneumatic parts ensure steady performance. The modular design makes maintenance quick. This SMT Stencil Cleaner keeps print quality high and production steady in busy shops.
| Feature
The I.C.T-750 SMT Stencil Cleaner stands firm with SUS 304 stainless steel throughout. This material fights acid and alkali corrosion so the machine lasts ten full years in factory conditions. No electric power flows through it at all. Only compressed air drives every moving part. The sturdy frame and thick panels hold up under daily use. Operators trust this build for years of service without worry. Modular sections let technicians reach inside fast when needed. Such solid engineering keeps the Stencil Cleaning Machine running smoothly shift after shift.
Compressed air powers the entire I.C.T-750 SMT Stencil Cleaner. A strong diaphragm pump from Ingersoll Rand pushes cleaning fluid at steady pressure. Indicator lights from Koganei and a timer from Hengstler give clear signals. No wires or outlets complicate setup. The system runs safely even in areas with strict electrical rules. Air flow stays constant at 0.5 to 0.7 MPa. This simple drive makes the SMT Pneumatic Stencil Cleaning Machine easy to place anywhere on the floor.
Patented 360° rotating spray rods turn on both sides inside the I.C.T-750 SMT Stencil Cleaner. They spray fluid from every angle to lift residues completely. Compressed air then blows the stencil dry in minutes. One button starts the full cycle so hands stay free. The inner-lock safety door stops everything if opened. This design cleans solder paste and red glue stencils to 100 percent every time. Tension on the frame stays safe and even.
Liquid recycles smartly in the I.C.T-750 SMT Stencil Cleaner. A 40-liter tank holds solvent or aqueous detergent. Three-level filters catch particles at 20 µm, 5 µm, and 1 µm. Clean fluid returns for reuse so consumption stays low. Stainless steel pipes and valves resist wear. The system works at room temperature with no heating. Operators adjust time and pressure to match exact needs. This careful control keeps the SMT Stencil Cleaner efficient day after day.
| Comparison Before and After
| Specification
| Parameter | I.C.T-750 (Pneumatic) | I.C.T-800 (Auto Aqueous) |
|---|---|---|
| Power Source | Compressed air only (no electricity) | Electric (AC380V, 3-phase, 33KW total) |
| Max Stencil Size | L750 × W750 × H40 mm | L750 × W750 × H40 mm |
| Cleaning Method | 360° rotation spray + air blow dry | 4 fixed spray rods + 4 air knives, stencil moves back & forth |
| Cleaning Liquid | Solvent or aqueous (both supported) | Aqueous detergent only |
| Liquid Tank Capacity | 40 L | 60 L × 2 (cleaning + rinse) |
| Cleaning Time | 2–4 minutes | 2–5 minutes |
| Drying Time | 2–5 minutes | 3–5 minutes (hot air) |
| Heating Function | No heating (room temperature) | Yes (detergent up to 60°C, hot air up to 90°C) |
| SMT Line Equipment List
I.C.T supplies SMT machine line with stencil printers, SPI, mounters, CBS SMD Reflow Oven, AOI, and conveyors for smooth assembly. For DIP lines it offers selective and wave soldering machines that handle through-hole parts accurately. Whether building SMT, DIP, or mixed lines, I.C.T matches every machine with planning, installation, and ongoing help to keep production reliable and efficient.
| Customer Success Video
I.C.T finished overseas installation and Factory Acceptance Testing for two full SMT lines at a North American beauty instrument maker. The project met every acceptance check on time. Lines included laser markers, SMT printers with SPI, Panasonic mounters, Heller reflow ovens, AOI systems, PCB conveyors, PCBA cleaners, and automatic solder paste thaw boxes. Engineers stayed on site for setup, training, and final tuning until lines ran perfectly. This work built strong trust in I.C.T for global SMT projects.
| Service and Training
I.C.T sends skilled engineers worldwide to install the SMT Stencil Cleaner and train operators on site. They teach daily use, quick maintenance, and simple troubleshooting. Remote help answers questions fast. Teams share tips to raise output and cut costs. With over 25 years of experience, support lasts long after delivery. Factories stay focused on production while experts handle equipment care and upgrades. This steady help keeps every Stencil Cleaning Machine working at its best.
| Customer Reviews
Clients praise engineers for their clear instructions and fast answers during installation. Many highlight the SMT Stencil Cleaner for its steady cleaning results and low liquid use. They note safe packaging that protected machines on long trips. Quick replies to questions earn high marks. Overall, buyers call I.C.T a solid partner that delivers strong equipment and real care from start to finish.
| Our Certification
The I.C.T-750 SMT Stencil Cleaner carries CE safety approval, RoHS environmental compliance, and ISO9001 quality registration. Several patents cover the rotating spray rods and safety features. These marks prove the machine meets global rules for safe, clean, and reliable operation. Customers know they receive equipment built to high standards that protect both workers and the environment.
| About Us and Factory
I.C.T runs its own research, design, and production in a 12,000 square meter Dongguan plant. Since 2012 the team has grown to 89 people, including 20 engineers. Eight branch offices serve 72 countries and over 1,600 customers. Strict tests and full quality systems check every machine. This setup delivers dependable SMT Stencil Cleaner solutions and complete support to help factories grow.
