English  |
I.C.T-5700
I.C.T
| Quantity: | |
|---|---|
| I.C.T-5700 Offline PCBA Router Machine
I.C.T-5700 PCBA Router Machine to separate finished PCBA boards without bending or cracking them. It handles work in smartphones, smart wear, tablets, automotive electronics, medical devices, aerospace, and military products. The machine takes PCBs up to 450×600 mm and thicknesses from 0.5 to 5.0 mm. Dual platforms let you process different boards at once or link them for larger sizes. The spindle turns at 60,000 rpm with very little cutting force. New CCD vision locates marks quickly and corrects position on its own. Ion air guns remove static so dust stays off the surface. A separate vacuum collector pulls dust away with strong suction and low noise. Easy controls, built-in safety, and data tracking make the day-to-day work straightforward. This off line PCBA router helps teams finish boards faster and keep quality high, especially for led PCB depaneling and led aluminum PCB depaneling.
| Feature
Transmission System
Panasonic servo motors from Japan drive the system along with high-precision screws. Every axis moves exactly where it should. The frame uses thicker material so the machine stays steady during long runs. Tank chains keep cables organized and out of the way. Nothing gets caught. The X-axis has a dust-proof cover that keeps particles out. Less dust means less cleaning and lower repair costs. Positioning repeats at ±0.01 mm. Speed hits 100 mm per second. The motion feels smooth and quiet. Operators run the machine for hours without issues. This setup works hard in real production and keeps everything accurate shift after shift.
Router System
The CCD camera sits right next to the cutter. Calibration happens fast and stays reliable. A sensor watches the milling tool all the time. If it breaks or wears down, an alarm goes off immediately. Optional automatic tool changing keeps the machine going without stops. The ion air gun blows static off the board surface. Dust does not settle. Imported high-speed spindles cut with almost no pressure. Precision holds tight. Inertia stays low. Response comes quick. Cutters handle 0.8 to 3 mm sizes. Vacuum pulls dust away cleanly. The PCBA routing Machine does fine work on complex boards without trouble.
Platform System
Servo motors and slide rails control the Y-axis. Movement stays solid. Emergency stop buttons sit on both sides. You can reach them easily. Safety covers and light curtains protect people working nearby. Two start buttons, one on each side, need pressing at the same time to begin. This prevents mistakes. The honeycomb base fits different fixtures well. Dual platforms handle separate jobs or combine for bigger panels. The whole design meets CE and UL rules. Cuts stay precise at ±0.05 mm. Operators feel safe and confident on every job.
Control System
An industrial computer and control card run the machine. Accuracy stays high. The system holds up well over time. Production data saves automatically. Reports come out when you need them. The layout follows CE and UL standards. The interface looks simple. New people learn it fast. Changing programs for different boards takes little time. The coaxial CCD camera shows live views. Alignment works perfectly. CNC controllers block electrical noise. Breakage and slip detection run standard. Power uses 1.5 kW at 220 V. It fits most factory setups.
Detail Display
Key parts show up clearly. Convection fans keep things cool inside. Side door sensors add safety. ESD interfaces protect sensitive boards from static. Automatic tool changer saves time. Broken knife sensors catch issues early. Self-locking pneumatic struts open and close smoothly. Components come from good brands. Panasonic servos are from Japan. Spindles use RSK or NSK. CCD is HIKVISION. Guide rails are PMI or HIWIN from Taiwan. Ball screws are TBI. Delta handles power. Sensors are Omron. Bearings are NSK. These last long. Repairs stay rare. Upper vacuuming option helps even more with dust.
| Specification
| Model | I.C.T-5700M | I.C.T-5700L | I.C.T-5700LL |
| Pcb Size(Double platform,Special size optional) | 290*350mm | 350*450mm | 450*500mm |
| PCB thickness | 0.3~6.0mm | ||
| Weight(with vacuum cleaner) | 1000kg | ||
| Dimension | 1075*1430*1460mm | 1125*1530*1460mm | 1225*1530*1460mm |
| Dust Collection Method | Vacuum cleaning | ||
| Air volume of vacuum cleaner | 28~35cm3/min | ||
| Vacuum cleaner Dimension | 640*785*1760mm | ||
| Voltage of the Dust Collector | 380V,50/60HZ,3kw | ||
| SMT Line Equipment List
I.C.T make real High-Quality PCBA Production Line. Vacuum loader give board clean. Auto printer put paste right. Placer set chip true. Many zone reflow solder hard. Good AOI find all bad. Line stay tight. Yield high. Cost low. No play. Make for hard work car health light. Board come ready real world. We back full.
| Product Name | Purpose in SMT Line |
|---|---|
| SMT Line | Turnkey Ful-auto SMT assembly line |
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| Customer Success Video
An Algerian factory that builds feature phones sent people to test the machine. They showed up with over ten board types and all the materials needed. We put together a full SMT line on site. It started with automatic printing, then SPI checked the paste. RX-8 placed small parts. RS-1R took care of bigger ones. Tray feeder supplied shielding covers. Reflow soldered the boards. AOI looked for defects. In the end, the PCBA Router Machine separated everything cleanly. The visitors watched closely. Cuts looked good with very few issues. They saw how steady the whole process runs. The team left feeling sure this equipment would work well in their own plant.
| Service and Training Support
I.C.T takes care of everything from the start. Engineers go on site to install the off line PCBA router, test it, and get it running right. Training includes operation, programming, and basic maintenance. Sessions work for new operators and experienced ones. Remote help answers questions quickly. Spare parts arrive fast when needed. With more than 25 years in this field, we understand factory problems. Customers in 72 countries get the same support. We adjust processes and upgrade when things change. The aim is simple: keep production going without interruptions.
| Client Testimonials
Customers talk about how clear our engineers are during setup and how fast they fix problems. They like the steady, accurate work from the PCBA Router Machine every day. Several point out the strong packaging that keeps the equipment safe on long trips. Fast answers to questions — by phone or email — make a big difference. Factories appreciate the reliable performance and support that help them stay on schedule.
| Certifications and Standards
I.C.T machines come with CE, RoHS, and ISO9001 certifications. We also hold several patents. These show the PCBA routing Machine meets global safety, environmental, and quality standards. Every unit goes through careful testing. Customers know they get proven, dependable equipment.
| About I.C.T Company and Factory
I.C.T began in 2012. The factory covers 12,000 square meters. We have 89 staff members, including 20 engineers. Research, development, and production all happen here. The company has grown quickly. More than 1,600 customers in 72 countries use our machines. Strict checks run at every step in the factory. A full quality management system keeps standards high. This lets us deliver solid SMT solutions worldwide with real support.
| I.C.T-5700 Offline PCBA Router Machine
I.C.T-5700 PCBA Router Machine to separate finished PCBA boards without bending or cracking them. It handles work in smartphones, smart wear, tablets, automotive electronics, medical devices, aerospace, and military products. The machine takes PCBs up to 450×600 mm and thicknesses from 0.5 to 5.0 mm. Dual platforms let you process different boards at once or link them for larger sizes. The spindle turns at 60,000 rpm with very little cutting force. New CCD vision locates marks quickly and corrects position on its own. Ion air guns remove static so dust stays off the surface. A separate vacuum collector pulls dust away with strong suction and low noise. Easy controls, built-in safety, and data tracking make the day-to-day work straightforward. This off line PCBA router helps teams finish boards faster and keep quality high, especially for led PCB depaneling and led aluminum PCB depaneling.
| Feature
Transmission System
Panasonic servo motors from Japan drive the system along with high-precision screws. Every axis moves exactly where it should. The frame uses thicker material so the machine stays steady during long runs. Tank chains keep cables organized and out of the way. Nothing gets caught. The X-axis has a dust-proof cover that keeps particles out. Less dust means less cleaning and lower repair costs. Positioning repeats at ±0.01 mm. Speed hits 100 mm per second. The motion feels smooth and quiet. Operators run the machine for hours without issues. This setup works hard in real production and keeps everything accurate shift after shift.
Router System
The CCD camera sits right next to the cutter. Calibration happens fast and stays reliable. A sensor watches the milling tool all the time. If it breaks or wears down, an alarm goes off immediately. Optional automatic tool changing keeps the machine going without stops. The ion air gun blows static off the board surface. Dust does not settle. Imported high-speed spindles cut with almost no pressure. Precision holds tight. Inertia stays low. Response comes quick. Cutters handle 0.8 to 3 mm sizes. Vacuum pulls dust away cleanly. The PCBA routing Machine does fine work on complex boards without trouble.
Platform System
Servo motors and slide rails control the Y-axis. Movement stays solid. Emergency stop buttons sit on both sides. You can reach them easily. Safety covers and light curtains protect people working nearby. Two start buttons, one on each side, need pressing at the same time to begin. This prevents mistakes. The honeycomb base fits different fixtures well. Dual platforms handle separate jobs or combine for bigger panels. The whole design meets CE and UL rules. Cuts stay precise at ±0.05 mm. Operators feel safe and confident on every job.
Control System
An industrial computer and control card run the machine. Accuracy stays high. The system holds up well over time. Production data saves automatically. Reports come out when you need them. The layout follows CE and UL standards. The interface looks simple. New people learn it fast. Changing programs for different boards takes little time. The coaxial CCD camera shows live views. Alignment works perfectly. CNC controllers block electrical noise. Breakage and slip detection run standard. Power uses 1.5 kW at 220 V. It fits most factory setups.
Detail Display
Key parts show up clearly. Convection fans keep things cool inside. Side door sensors add safety. ESD interfaces protect sensitive boards from static. Automatic tool changer saves time. Broken knife sensors catch issues early. Self-locking pneumatic struts open and close smoothly. Components come from good brands. Panasonic servos are from Japan. Spindles use RSK or NSK. CCD is HIKVISION. Guide rails are PMI or HIWIN from Taiwan. Ball screws are TBI. Delta handles power. Sensors are Omron. Bearings are NSK. These last long. Repairs stay rare. Upper vacuuming option helps even more with dust.
| Specification
| Model | I.C.T-5700M | I.C.T-5700L | I.C.T-5700LL |
| Pcb Size(Double platform,Special size optional) | 290*350mm | 350*450mm | 450*500mm |
| PCB thickness | 0.3~6.0mm | ||
| Weight(with vacuum cleaner) | 1000kg | ||
| Dimension | 1075*1430*1460mm | 1125*1530*1460mm | 1225*1530*1460mm |
| Dust Collection Method | Vacuum cleaning | ||
| Air volume of vacuum cleaner | 28~35cm3/min | ||
| Vacuum cleaner Dimension | 640*785*1760mm | ||
| Voltage of the Dust Collector | 380V,50/60HZ,3kw | ||
| SMT Line Equipment List
I.C.T make real High-Quality PCBA Production Line. Vacuum loader give board clean. Auto printer put paste right. Placer set chip true. Many zone reflow solder hard. Good AOI find all bad. Line stay tight. Yield high. Cost low. No play. Make for hard work car health light. Board come ready real world. We back full.
| Product Name | Purpose in SMT Line |
|---|---|
| SMT Line | Turnkey Ful-auto SMT assembly line |
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| Customer Success Video
An Algerian factory that builds feature phones sent people to test the machine. They showed up with over ten board types and all the materials needed. We put together a full SMT line on site. It started with automatic printing, then SPI checked the paste. RX-8 placed small parts. RS-1R took care of bigger ones. Tray feeder supplied shielding covers. Reflow soldered the boards. AOI looked for defects. In the end, the PCBA Router Machine separated everything cleanly. The visitors watched closely. Cuts looked good with very few issues. They saw how steady the whole process runs. The team left feeling sure this equipment would work well in their own plant.
| Service and Training Support
I.C.T takes care of everything from the start. Engineers go on site to install the off line PCBA router, test it, and get it running right. Training includes operation, programming, and basic maintenance. Sessions work for new operators and experienced ones. Remote help answers questions quickly. Spare parts arrive fast when needed. With more than 25 years in this field, we understand factory problems. Customers in 72 countries get the same support. We adjust processes and upgrade when things change. The aim is simple: keep production going without interruptions.
| Client Testimonials
Customers talk about how clear our engineers are during setup and how fast they fix problems. They like the steady, accurate work from the PCBA Router Machine every day. Several point out the strong packaging that keeps the equipment safe on long trips. Fast answers to questions — by phone or email — make a big difference. Factories appreciate the reliable performance and support that help them stay on schedule.
| Certifications and Standards
I.C.T machines come with CE, RoHS, and ISO9001 certifications. We also hold several patents. These show the PCBA routing Machine meets global safety, environmental, and quality standards. Every unit goes through careful testing. Customers know they get proven, dependable equipment.
| About I.C.T Company and Factory
I.C.T began in 2012. The factory covers 12,000 square meters. We have 89 staff members, including 20 engineers. Research, development, and production all happen here. The company has grown quickly. More than 1,600 customers in 72 countries use our machines. Strict checks run at every step in the factory. A full quality management system keeps standards high. This lets us deliver solid SMT solutions worldwide with real support.
