English  |
I.C.T-P3
I.C.T
| Quantity: | |
|---|---|
| SMT Line Starter Solder Paste Jet Printing Machine
In a full SMT line, the I.C.T-P3 SMT Automatic Stencil Printing Machine feeds clean paste to JUKI placers and L8 ovens without bridges. Taiwan rails and Omron sensors hold ±0.05mm so the first PCB assembly line step avoids solder defects downstream. Dual cylinders push paste over twin tracks for uniform volume that boosts reflow yield. The bench pins lock boards 0.2-6mm thick – connect to conveyor belts in minutes for non-stop PCB assembly line flow. English panel teaches semi-auto mode to match line pace. At 200W and 8-second prints, the Solder Paste Screen Printer keeps the SMT production line running cool and fast for LED drivers or medical boards.
| Feature
Pins and blocks snap to SMEMA standards for direct belt handoff to placers in the SMT line. Taiwan rails with Leadshine motor sync speed to upstream loaders – no vibration spills paste before placement. Manual lift opens for quick stir while sensors auto-match conveyor height. This setup cuts PCB assembly line changeover to 20 seconds and stops paste dry-out that slows the whole SMT production line.
Separate cylinders dial pressure per side on double rails for 0.01mm flat prints that feed perfect pads to chip shooters. Gauge and knob lock 0-200mm/sec to match placer cycle time in the SMT line. Touch screen stores line recipes, shows live offset to conveyor and auto-starts after board infeed. Delta, SMC and FESTO parts let the Semi Automatic Solder Paste Printer run full shifts without paste waste that backs up the PCB assembly line.
| Specification
| Model | P3 | P6 | P12 | P15 |
| Accuracy | +/- 0.05mm | +/- 0.05mm | +/- 0.05mm | +/- 0.05mm |
| PCB Size | 300 x 350 mm | 600 x 350 mm | 1200 x 350 mm | 1500 x 350 mm |
| Platform size | 320 x 400 mm | 700 x 400 mm | 1350 x 400 mm | 1650 x 400 mm |
| Stencil Size(mm) | 370*470-550*650 | 370*470-550*650 | 370*470-1500*650 | 370*470-1750*650 |
| PCB Thickness | 0.2 - 6 mm | 0.2 - 6 mm | 0.2 - 6 mm | 0.2 - 6 mm |
| Stencil Positioning | Manual | Manual | Manual | Manual |
| Cycle Time | < 10 Sec. | < 10 Sec. | < 12 Sec. | < 12 Sec. |
| Power Consumption | 200 W | 200 W | 220 W | 220 W |
| Power Supply | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ |
| Air Pressure | 4.5-6 kg/cm | 4.5-6 kg/cm | 4.5-6 kg/cm | 4.5-6 kg/cm |
| Squeegee Speed | 0-200mm/sec | 0-1200mm/sec | 0-200mm/sec | 0-200mm/sec |
| Dimension | 850x750x1650 mm | 1050x750x1650 mm | 1660x750x1650 mm | 2100x750x1650 mm |
| Weight | 280 Kg | 300 Kg | 356 Kg | 430 Kg |
| Squeegee Length | 250mm | 250mm | 250mm | 250mm |
| Platform Height | 950mm | 950mm | 950mm | 950mm |
| Option: Special size can be customized | ||||
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| SMT Line Equipment List
I.C.T High Quality PCBA Production Line features advanced equipment for efficient and precise PCB assembly. The fully automated SMT line includes a loader, an auto printer for accurate solder paste application, a pick-and-place machine for precise component placement, a reflow oven for reliable soldering, and an AOI system for thorough defect inspection. This High Quality PCBA Production Line ensures smooth operation, high reliability, and low-cost SMT assembly, meeting diverse industry requirements.
| Product Name | Purpose in SMT Line |
|---|---|
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
Inspects internal solder joint integrity and detects hidden defects. | |
| SMT Cleaning Machine | Used for cleaning PCBs, stencils, fixtures, nozzles, etc. |
| PCB Cutting Machine | Cut the PCBA into the final product |
| Traceability Equipment | Records and tracks production data: Laser Marking Machine/Label Mounter/Inkjet Printer |
| Customer Success Case Study – Saudi Arabia LED Factory
A Saudi client bought the turn-key SMT line from I.C.T with the I.C.T-P3 PCB Printer as the Solder Paste Jet Printing Machine, JUKI RS-1R placer and L8 reflow for LED bulbs. Our engineers flew overseas to the Riyadh factory, docked the Semi-auto Solder Paste Printer to conveyors, tuned paste for 300mm boards and trained operators seven days on line balancing. The PCB assembly line hit 500 boards/hour the next day with zero paste skips feeding placement. The buyer loved the overseas docking, crates that survived travel and training that synced the whole SMT production line in one week.
| Global Service & Training Support
I.C.T builds whole SMT lines risk-free: free conveyor layout, 48-hour line simulation, dock-and-run install, 7-10 day line operator camp, year-one spares, remote line debug via camera and quarterly throughput audits. Twenty engineers reach 72 countries with 4-hour reply and 24/7 line hotline. Every Solder Paste Jet Printing Machine passes full-line burn-in on our 12,000m² ISO9001 floor. Clients get balanced SMT production lines, higher UPH and partners that scale PCB assembly lines together.
| Customer Reviews
1600+ SMT lines in 72 countries run on I.C.T gear. They praise free SMEMA drawings that fit tight floors, crates that land ready for dock, week-long camps that teach line flow, 1-hour remote fixes that clear placer jams and yearly visits that lift line OEE 18%. Factories add printers because one-stop line care means more boards out, less rework and true team wins.
| Certifications and Standards
All Solder Paste Jet Printing Machine units carry CE, RoHS, ISO9001:2015 and patents. Lab SMEMA tests and 100% line checks meet EU/US rules for safe paste in SMT production lines. These prove green flux, no EMI to placers, safe dock and long frame – line trust from first board.
| About I.C.T Company and Our Factory
Since 2012 I.C.T runs 12,000m² in Dongguan with 89 staff and 20 line engineers. We design, link and test full PCB assembly lines under ISO9001. Over 1600 SMT production lines in 72 countries grow on our fair quotes, next-day spares and line upgrades. Eight offices and stock keep dock help in 48 hours.
| SMT Line Starter Solder Paste Jet Printing Machine
In a full SMT line, the I.C.T-P3 SMT Automatic Stencil Printing Machine feeds clean paste to JUKI placers and L8 ovens without bridges. Taiwan rails and Omron sensors hold ±0.05mm so the first PCB assembly line step avoids solder defects downstream. Dual cylinders push paste over twin tracks for uniform volume that boosts reflow yield. The bench pins lock boards 0.2-6mm thick – connect to conveyor belts in minutes for non-stop PCB assembly line flow. English panel teaches semi-auto mode to match line pace. At 200W and 8-second prints, the Solder Paste Screen Printer keeps the SMT production line running cool and fast for LED drivers or medical boards.
| Feature
Pins and blocks snap to SMEMA standards for direct belt handoff to placers in the SMT line. Taiwan rails with Leadshine motor sync speed to upstream loaders – no vibration spills paste before placement. Manual lift opens for quick stir while sensors auto-match conveyor height. This setup cuts PCB assembly line changeover to 20 seconds and stops paste dry-out that slows the whole SMT production line.
Separate cylinders dial pressure per side on double rails for 0.01mm flat prints that feed perfect pads to chip shooters. Gauge and knob lock 0-200mm/sec to match placer cycle time in the SMT line. Touch screen stores line recipes, shows live offset to conveyor and auto-starts after board infeed. Delta, SMC and FESTO parts let the Semi Automatic Solder Paste Printer run full shifts without paste waste that backs up the PCB assembly line.
| Specification
| Model | P3 | P6 | P12 | P15 |
| Accuracy | +/- 0.05mm | +/- 0.05mm | +/- 0.05mm | +/- 0.05mm |
| PCB Size | 300 x 350 mm | 600 x 350 mm | 1200 x 350 mm | 1500 x 350 mm |
| Platform size | 320 x 400 mm | 700 x 400 mm | 1350 x 400 mm | 1650 x 400 mm |
| Stencil Size(mm) | 370*470-550*650 | 370*470-550*650 | 370*470-1500*650 | 370*470-1750*650 |
| PCB Thickness | 0.2 - 6 mm | 0.2 - 6 mm | 0.2 - 6 mm | 0.2 - 6 mm |
| Stencil Positioning | Manual | Manual | Manual | Manual |
| Cycle Time | < 10 Sec. | < 10 Sec. | < 12 Sec. | < 12 Sec. |
| Power Consumption | 200 W | 200 W | 220 W | 220 W |
| Power Supply | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ |
| Air Pressure | 4.5-6 kg/cm | 4.5-6 kg/cm | 4.5-6 kg/cm | 4.5-6 kg/cm |
| Squeegee Speed | 0-200mm/sec | 0-1200mm/sec | 0-200mm/sec | 0-200mm/sec |
| Dimension | 850x750x1650 mm | 1050x750x1650 mm | 1660x750x1650 mm | 2100x750x1650 mm |
| Weight | 280 Kg | 300 Kg | 356 Kg | 430 Kg |
| Squeegee Length | 250mm | 250mm | 250mm | 250mm |
| Platform Height | 950mm | 950mm | 950mm | 950mm |
| Option: Special size can be customized | ||||
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| SMT Line Equipment List
I.C.T High Quality PCBA Production Line features advanced equipment for efficient and precise PCB assembly. The fully automated SMT line includes a loader, an auto printer for accurate solder paste application, a pick-and-place machine for precise component placement, a reflow oven for reliable soldering, and an AOI system for thorough defect inspection. This High Quality PCBA Production Line ensures smooth operation, high reliability, and low-cost SMT assembly, meeting diverse industry requirements.
| Product Name | Purpose in SMT Line |
|---|---|
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
Inspects internal solder joint integrity and detects hidden defects. | |
| SMT Cleaning Machine | Used for cleaning PCBs, stencils, fixtures, nozzles, etc. |
| PCB Cutting Machine | Cut the PCBA into the final product |
| Traceability Equipment | Records and tracks production data: Laser Marking Machine/Label Mounter/Inkjet Printer |
| Customer Success Case Study – Saudi Arabia LED Factory
A Saudi client bought the turn-key SMT line from I.C.T with the I.C.T-P3 PCB Printer as the Solder Paste Jet Printing Machine, JUKI RS-1R placer and L8 reflow for LED bulbs. Our engineers flew overseas to the Riyadh factory, docked the Semi-auto Solder Paste Printer to conveyors, tuned paste for 300mm boards and trained operators seven days on line balancing. The PCB assembly line hit 500 boards/hour the next day with zero paste skips feeding placement. The buyer loved the overseas docking, crates that survived travel and training that synced the whole SMT production line in one week.
| Global Service & Training Support
I.C.T builds whole SMT lines risk-free: free conveyor layout, 48-hour line simulation, dock-and-run install, 7-10 day line operator camp, year-one spares, remote line debug via camera and quarterly throughput audits. Twenty engineers reach 72 countries with 4-hour reply and 24/7 line hotline. Every Solder Paste Jet Printing Machine passes full-line burn-in on our 12,000m² ISO9001 floor. Clients get balanced SMT production lines, higher UPH and partners that scale PCB assembly lines together.
| Customer Reviews
1600+ SMT lines in 72 countries run on I.C.T gear. They praise free SMEMA drawings that fit tight floors, crates that land ready for dock, week-long camps that teach line flow, 1-hour remote fixes that clear placer jams and yearly visits that lift line OEE 18%. Factories add printers because one-stop line care means more boards out, less rework and true team wins.
| Certifications and Standards
All Solder Paste Jet Printing Machine units carry CE, RoHS, ISO9001:2015 and patents. Lab SMEMA tests and 100% line checks meet EU/US rules for safe paste in SMT production lines. These prove green flux, no EMI to placers, safe dock and long frame – line trust from first board.
| About I.C.T Company and Our Factory
Since 2012 I.C.T runs 12,000m² in Dongguan with 89 staff and 20 line engineers. We design, link and test full PCB assembly lines under ISO9001. Over 1600 SMT production lines in 72 countries grow on our fair quotes, next-day spares and line upgrades. Eight offices and stock keep dock help in 48 hours.
