English  |
I.C.T
| Quantity: | |
|---|---|
| High-End Jet Dispensing Machine
The I.C.T glue dispenser works hard and works clean. It puts glue exactly where you need it on PCBs, LED lenses, medical parts, and SMT red glue jobs. Servo motors and precision screws drive every move. Vision system finds marks and fixes edges so nothing drifts. Glue preheating keeps flow perfect. Multiple syringes and glue types load fast. The Desktop Glue Dispenser Machine for PCB fits small shops or big lines. Our engineers stand behind every machine, anywhere in the world. You get results, not excuses.
| Detailed Product Features
The valve controls glue volume down to the last drop. Servo motor and grinding screw repeat the same amount every cycle. Preheating holds viscosity steady. It accepts red glue, underfill, dam-and-fill, almost anything. Syringe size changes in minutes. Cleaning cycle runs automatic. No clogs. No waste. Bonding stays strong on LED lenses and medical boards. The glue dispenser never misses.
Anti-static belts run smooth and quiet. Independent motors drive each section. Boards stop dead-center with the adjustable stop bar. Width changes by grinding screw—rails stay parallel every time. Accepts boards up to 600×600 mm and 5 kg. Transport speed hits 300 mm/s in any direction: left-to-right, right-to-left, pass-through. The Desktop Glue Dispenser Machine for PCB flows straight into your line with zero deviation.
The glue dispenser cleans itself. One button starts the cycle. Valve tip stays wet and open. Temperature control locks glue thickness all shift long. No dried glue blocks the path. Maintenance takes seconds, not hours. Machine runs longer between stops. Output stays uniform. Bonding stays reliable. Simple system, strong results.
PLC plus industrial PC run the show. System follows CE rules and Industry 4.0 layout. Panasonic servos, Omron relays, Schneider switches—parts you trust. MES port ready for your factory network. Add 3D scan or UV cure later without new wiring. UFD software speaks plain English. New operators learn fast. The glue dispenser keeps running 24/7.
| Specification
| Model | I.C.T-D450 | I.C.T-D600(LENS) | I.C.T-D1200(LENS) |
| Dispensing Range | X400*Y400*Z50mm | X600*Y400*Z50mm | X1200*Y400*Z50mm |
| Product Weight | Max.4.5kg | ||
| Product Thickness | Max.6mm | ||
| Maximum Speed | 2000mm/s | ||
| Vision Methodology | CCD | ||
| Cleaning System | Auto | ||
| Injection Valve Speed | 200 points/s | ||
| Dispensing Accuracy | ±0.02mm | ||
| Repeated Accuracy | ±0.01mm | ||
| Weight | 650 Kg | 750 Kg | 950 Kg |
| Dimension | W770*D1200*H1500mm | W880*D1200*H1500mm | W1590*D1200*H1500mm |
| SMT Line Equipment List
Board in, finished panel out. Loader feeds clean. Glue dispenser shoots exact dots at full speed. Pick-and-place drops components or lenses onto wet glue. IR or UV oven hardens everything in seconds. Optional AOI checks volume and position. All stations talk SMEMA and run in rhythm. One or two operators watch the line. Yield stays above 99.5 %. Uptime never drops. Automotive, medical, LED—standards met, costs cut, profits rise. One complete Desktop Glue Dispenser Machine for PCB line. Zero headaches. Maximum money.
| Product Name | Purpose in Glue Dispensing Line |
|---|---|
| Glue Dispensing Machine | Delivers high-speed, ultra-precise glue dispensing |
| Conformal Coating Machine | Applies final protective coating for reliability |
| Pick and Place Machine | Accurately places components onto fresh glue |
| Curing Oven | Rapidly cures glue with IR or UV technology |
| Customer Success Story
Two I.C.T engineers flew to Tajikistan. The customer bought two full SMT lines, one DIP line, one coating line, one glue line, and one LED bulb assembly line. Our men installed every machine. They trained local staff day and night. The glue dispenser placed perfect dots. Pick-and-place set lenses dead center. Curing ovens hardened everything fast. All LED products—bulbs, panels, strips—came out clean and bright. Customer filmed the whole process and gave thumbs up on camera. They said output doubled and defects disappeared.
| Professional Training & Support
We install the glue dispenser on your floor. We train your people until they run it alone. Remote support answers in hours, not days. Spare parts ship overnight from eight global warehouses. On-site service arrives fast when needed. Software updates come free. Process tuning costs nothing extra. The Desktop Glue Dispenser Machine for PCB keeps earning money instead of losing it.
| Customer Praise
Customers tell us our engineers know the machine inside out. They like the rock-solid glue dots and zero drift. They thank us for bullet-proof export packing—no damage ever. Remote fixes happen quick. Machines start on time and stay running. Profits go up. That is what they say, every time.
| Our Certification
CE, RoHS, ISO9001, and multiple patents sit on our wall. Every glue dispenser passes the same tests. Safety, environment, quality—checked and signed. You ship to Europe, America, anywhere without worry.
i
| About Us and Factory
We own the factory in Dongguan. 12 000 m², 89 people, 20 engineers, $30 million capital. Since 2012 we built and shipped lines to 1 600 customers in 72 countries. Every glue dispenser leaves after full load test. Quality system runs strict. Growth stays fast. We make it, we support it, we stand by it.
| High-End Jet Dispensing Machine
The I.C.T glue dispenser works hard and works clean. It puts glue exactly where you need it on PCBs, LED lenses, medical parts, and SMT red glue jobs. Servo motors and precision screws drive every move. Vision system finds marks and fixes edges so nothing drifts. Glue preheating keeps flow perfect. Multiple syringes and glue types load fast. The Desktop Glue Dispenser Machine for PCB fits small shops or big lines. Our engineers stand behind every machine, anywhere in the world. You get results, not excuses.
| Detailed Product Features
The valve controls glue volume down to the last drop. Servo motor and grinding screw repeat the same amount every cycle. Preheating holds viscosity steady. It accepts red glue, underfill, dam-and-fill, almost anything. Syringe size changes in minutes. Cleaning cycle runs automatic. No clogs. No waste. Bonding stays strong on LED lenses and medical boards. The glue dispenser never misses.
Anti-static belts run smooth and quiet. Independent motors drive each section. Boards stop dead-center with the adjustable stop bar. Width changes by grinding screw—rails stay parallel every time. Accepts boards up to 600×600 mm and 5 kg. Transport speed hits 300 mm/s in any direction: left-to-right, right-to-left, pass-through. The Desktop Glue Dispenser Machine for PCB flows straight into your line with zero deviation.
The glue dispenser cleans itself. One button starts the cycle. Valve tip stays wet and open. Temperature control locks glue thickness all shift long. No dried glue blocks the path. Maintenance takes seconds, not hours. Machine runs longer between stops. Output stays uniform. Bonding stays reliable. Simple system, strong results.
PLC plus industrial PC run the show. System follows CE rules and Industry 4.0 layout. Panasonic servos, Omron relays, Schneider switches—parts you trust. MES port ready for your factory network. Add 3D scan or UV cure later without new wiring. UFD software speaks plain English. New operators learn fast. The glue dispenser keeps running 24/7.
| Specification
| Model | I.C.T-D450 | I.C.T-D600(LENS) | I.C.T-D1200(LENS) |
| Dispensing Range | X400*Y400*Z50mm | X600*Y400*Z50mm | X1200*Y400*Z50mm |
| Product Weight | Max.4.5kg | ||
| Product Thickness | Max.6mm | ||
| Maximum Speed | 2000mm/s | ||
| Vision Methodology | CCD | ||
| Cleaning System | Auto | ||
| Injection Valve Speed | 200 points/s | ||
| Dispensing Accuracy | ±0.02mm | ||
| Repeated Accuracy | ±0.01mm | ||
| Weight | 650 Kg | 750 Kg | 950 Kg |
| Dimension | W770*D1200*H1500mm | W880*D1200*H1500mm | W1590*D1200*H1500mm |
| SMT Line Equipment List
Board in, finished panel out. Loader feeds clean. Glue dispenser shoots exact dots at full speed. Pick-and-place drops components or lenses onto wet glue. IR or UV oven hardens everything in seconds. Optional AOI checks volume and position. All stations talk SMEMA and run in rhythm. One or two operators watch the line. Yield stays above 99.5 %. Uptime never drops. Automotive, medical, LED—standards met, costs cut, profits rise. One complete Desktop Glue Dispenser Machine for PCB line. Zero headaches. Maximum money.
| Product Name | Purpose in Glue Dispensing Line |
|---|---|
| Glue Dispensing Machine | Delivers high-speed, ultra-precise glue dispensing |
| Conformal Coating Machine | Applies final protective coating for reliability |
| Pick and Place Machine | Accurately places components onto fresh glue |
| Curing Oven | Rapidly cures glue with IR or UV technology |
| Customer Success Story
Two I.C.T engineers flew to Tajikistan. The customer bought two full SMT lines, one DIP line, one coating line, one glue line, and one LED bulb assembly line. Our men installed every machine. They trained local staff day and night. The glue dispenser placed perfect dots. Pick-and-place set lenses dead center. Curing ovens hardened everything fast. All LED products—bulbs, panels, strips—came out clean and bright. Customer filmed the whole process and gave thumbs up on camera. They said output doubled and defects disappeared.
| Professional Training & Support
We install the glue dispenser on your floor. We train your people until they run it alone. Remote support answers in hours, not days. Spare parts ship overnight from eight global warehouses. On-site service arrives fast when needed. Software updates come free. Process tuning costs nothing extra. The Desktop Glue Dispenser Machine for PCB keeps earning money instead of losing it.
| Customer Praise
Customers tell us our engineers know the machine inside out. They like the rock-solid glue dots and zero drift. They thank us for bullet-proof export packing—no damage ever. Remote fixes happen quick. Machines start on time and stay running. Profits go up. That is what they say, every time.
| Our Certification
CE, RoHS, ISO9001, and multiple patents sit on our wall. Every glue dispenser passes the same tests. Safety, environment, quality—checked and signed. You ship to Europe, America, anywhere without worry.
i
| About Us and Factory
We own the factory in Dongguan. 12 000 m², 89 people, 20 engineers, $30 million capital. Since 2012 we built and shipped lines to 1 600 customers in 72 countries. Every glue dispenser leaves after full load test. Quality system runs strict. Growth stays fast. We make it, we support it, we stand by it.
