English  |
I.C.T-1200
I.C.T
| Quantity: | |
|---|---|
| Automatic Solder Paste Printing Machine
The I.C.T Automatic solder paste printing machine is built for LED and large PCBs up to 1200mm. It reaches zero defects with Industry 4.0 and MES connection. Repeat accuracy hits ±0.015mm, printing at 0.03mm. This 1.2m solder paste printer handles boards 8050 to 1200350mm. It does glue printing, auto cleaning, pressure adjust to raise speed and cut costs. Top parts from Panasonic, SMC, Kuroda keep failure low. Windows 10 makes new jobs ready fast. Good for LED lights, car electronics, normal SMD. This Automatic solder paste printing machine gives steady prints and simple daily run.
| Feature
Arch bridge suspension with direct squeegee link in the Automatic solder paste printing machine. Two stepping motors drive pressure for exact control. Slide rails keep position before and after. Suspended head changes pressure with live feedback. It balances online and picks separation ways. This cuts errors on 1.2m solder paste printer jobs and spreads paste even on big LED boards.
Special belt stops PCB jams in this 1.2m solder paste printer. Motor sets speed and stops right. Directions switch to fit lines: left-right or more. Side clamps and vacuum hold boards to stencil. Handles thin or bent PCBs. This makes contact full and line fast in SMT work every day.
Dry, wet, or hand modes for the Automatic solder paste printing machine. CCD apart from spray for good sight. Spray hits even top to bottom, uses less alcohol and paper. Software checks use. Strong vacuum takes residue quick. This keeps stencil good and prints high with short stops.
| Specification
| Model | I.C.T-4034 | I.C.T5134 | I.C.T-5151 |
| Frame Size(mm) | 470*370 ~ 737*737 | 470*370 ~ 737*737 | 470*370 ~ 737*737 |
| PCB Size(mm) | 50*50 ~ 400*340 | 50*50 ~ 510*340 | 50*50 ~ 510*510 |
| Transport Direction | Left-Right; Right-Left; Left-Left; Right-Right | ||
| Support System | Magnetic Pin/Up-down table adjusted/support block | ||
| Clamping System | Side clamping(vacuum nozzle,Automation retractable Z pressure is option) | ||
| Printer Head | Two independent motorised printhead | ||
| Squeegee Type | Stainless steel(standard),plastic | ||
| Cleaning System | Dry, Wet, Vacuum | ||
| Inspection | 2D Inspection(Standard) | ||
| Power Supply | AC:220±10%,50/60HZ,3Kw | ||
| Control Method | PC Control | ||
| Dimension(mm) | 1220*1355*1500 | 1220*1355*1500 | 1220*1550*1500 |
| Model | I.C.T-6534 | I.C.T-6561 | I.C.T-9060 |
| Frame Size(mm) | 650*400 ~ 850*750 | 650*400 ~ 850*850 | 737*400 ~ 1100*900 |
| PCB Size(mm) | 50*50 ~ 650*340 | 80*50 ~ 650*610 | 80*50 ~ 900*600 |
| Dimension(mm) | 1330*1370*1500 | 1330*15450*1500 | 1580*1545*1500 |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| SMT Line Equipment List
I.C.T High Quality PCBA Production Line features advanced equipment for efficient and precise PCB assembly. The fully automated SMT line includes a loader, an auto printer for accurate solder paste application, a pick-and-place machine for precise component placement, a reflow oven for reliable soldering, and an AOI system for thorough defect inspection. This High Quality PCBA Production Line ensures smooth operation, high reliability, and low-cost SMT assembly, meeting diverse industry requirements.
| Product Name | Purpose in SMT Line |
|---|---|
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
Inspects internal solder joint integrity and detects hidden defects. | |
| SMT Cleaning Machine | Used for cleaning PCBs, stencils, fixtures, nozzles, etc. |
| PCB Cutting Machine | Cut the PCBA into the final product |
| Traceability Equipment | Records and tracks production data: Laser Marking Machine/Label Mounter/Inkjet Printer |
| Customer Success Video
In 2025, I.C.T engineers went to a home LED lighting factory for full install and training. Customer needed 13 machines in a 29-meter line, but space was 21x5 meters. We made a U-shape layout to fit 16x2.7 meters. Two days for wiring, placement, tests, and links including the Automatic solder paste printing machine. Six days training covered board load, settings, cleans, fixes, and MES data. Line started with no issues, raised LED output. Customer got customized fit without extra space or delays. This shows how the 1.2m solder paste printer works in tight spots for quick gains and zero defects.
| Global Service & Training Support
I.C.T does full install, fix, and training for the Automatic solder paste printing machine. Engineers look at customer needs, make customized line plans, change processes, test on site. Global centers send parts quick, do remote checks, update software. Training shows daily runs, pressure sets, clean steps, error reads, safe ways. We help customers in 72 countries with 25 years know-how. This starts lines from zero, solves issues fast, aids growth with lower cost and less worry.
| Customer Reviews
Customers say engineers teach clear and help fast on site. The Automatic solder paste printing machine gets good words for exact prints and few stops even in long shifts. Packing with foam and crates keeps safe on long ships. Calls or remote fix problems in hours. Customers feel trust, lines stay up, and they make more LED boards every day.
| Certifications and Standards
I.C.T has CE for safe, RoHS for clean parts, ISO9001 for good control. Many patents on cleaning save, quick switch, crash stop, glue tool, error find, print force, process, quality stent, stencil wipe, lift speed, belt move. Even G company copies some from I.C.T. These make 1.2m solder paste printer safe and new for world sales with high trust.
| About I.C.T Company and Our Factory
I.C.T has own R&D and build with 89 staff, 20 engineers, grows fast since 2012. We serve 1600 customers in 72 countries with full SMT. 12,000m² park checks parts in, builds exact, tests long, controls quality tight. This means low errors, gear lasts over 10 years. Branches mix global and local help. We do honest, simple, open, team, share wins. Customers get from zero lines, upgrades, speed, market change with zero risk.
| Automatic Solder Paste Printing Machine
The I.C.T Automatic solder paste printing machine is built for LED and large PCBs up to 1200mm. It reaches zero defects with Industry 4.0 and MES connection. Repeat accuracy hits ±0.015mm, printing at 0.03mm. This 1.2m solder paste printer handles boards 8050 to 1200350mm. It does glue printing, auto cleaning, pressure adjust to raise speed and cut costs. Top parts from Panasonic, SMC, Kuroda keep failure low. Windows 10 makes new jobs ready fast. Good for LED lights, car electronics, normal SMD. This Automatic solder paste printing machine gives steady prints and simple daily run.
| Feature
Arch bridge suspension with direct squeegee link in the Automatic solder paste printing machine. Two stepping motors drive pressure for exact control. Slide rails keep position before and after. Suspended head changes pressure with live feedback. It balances online and picks separation ways. This cuts errors on 1.2m solder paste printer jobs and spreads paste even on big LED boards.
Special belt stops PCB jams in this 1.2m solder paste printer. Motor sets speed and stops right. Directions switch to fit lines: left-right or more. Side clamps and vacuum hold boards to stencil. Handles thin or bent PCBs. This makes contact full and line fast in SMT work every day.
Dry, wet, or hand modes for the Automatic solder paste printing machine. CCD apart from spray for good sight. Spray hits even top to bottom, uses less alcohol and paper. Software checks use. Strong vacuum takes residue quick. This keeps stencil good and prints high with short stops.
| Specification
| Model | I.C.T-4034 | I.C.T5134 | I.C.T-5151 |
| Frame Size(mm) | 470*370 ~ 737*737 | 470*370 ~ 737*737 | 470*370 ~ 737*737 |
| PCB Size(mm) | 50*50 ~ 400*340 | 50*50 ~ 510*340 | 50*50 ~ 510*510 |
| Transport Direction | Left-Right; Right-Left; Left-Left; Right-Right | ||
| Support System | Magnetic Pin/Up-down table adjusted/support block | ||
| Clamping System | Side clamping(vacuum nozzle,Automation retractable Z pressure is option) | ||
| Printer Head | Two independent motorised printhead | ||
| Squeegee Type | Stainless steel(standard),plastic | ||
| Cleaning System | Dry, Wet, Vacuum | ||
| Inspection | 2D Inspection(Standard) | ||
| Power Supply | AC:220±10%,50/60HZ,3Kw | ||
| Control Method | PC Control | ||
| Dimension(mm) | 1220*1355*1500 | 1220*1355*1500 | 1220*1550*1500 |
| Model | I.C.T-6534 | I.C.T-6561 | I.C.T-9060 |
| Frame Size(mm) | 650*400 ~ 850*750 | 650*400 ~ 850*850 | 737*400 ~ 1100*900 |
| PCB Size(mm) | 50*50 ~ 650*340 | 80*50 ~ 650*610 | 80*50 ~ 900*600 |
| Dimension(mm) | 1330*1370*1500 | 1330*15450*1500 | 1580*1545*1500 |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| SMT Line Equipment List
I.C.T High Quality PCBA Production Line features advanced equipment for efficient and precise PCB assembly. The fully automated SMT line includes a loader, an auto printer for accurate solder paste application, a pick-and-place machine for precise component placement, a reflow oven for reliable soldering, and an AOI system for thorough defect inspection. This High Quality PCBA Production Line ensures smooth operation, high reliability, and low-cost SMT assembly, meeting diverse industry requirements.
| Product Name | Purpose in SMT Line |
|---|---|
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
Inspects internal solder joint integrity and detects hidden defects. | |
| SMT Cleaning Machine | Used for cleaning PCBs, stencils, fixtures, nozzles, etc. |
| PCB Cutting Machine | Cut the PCBA into the final product |
| Traceability Equipment | Records and tracks production data: Laser Marking Machine/Label Mounter/Inkjet Printer |
| Customer Success Video
In 2025, I.C.T engineers went to a home LED lighting factory for full install and training. Customer needed 13 machines in a 29-meter line, but space was 21x5 meters. We made a U-shape layout to fit 16x2.7 meters. Two days for wiring, placement, tests, and links including the Automatic solder paste printing machine. Six days training covered board load, settings, cleans, fixes, and MES data. Line started with no issues, raised LED output. Customer got customized fit without extra space or delays. This shows how the 1.2m solder paste printer works in tight spots for quick gains and zero defects.
| Global Service & Training Support
I.C.T does full install, fix, and training for the Automatic solder paste printing machine. Engineers look at customer needs, make customized line plans, change processes, test on site. Global centers send parts quick, do remote checks, update software. Training shows daily runs, pressure sets, clean steps, error reads, safe ways. We help customers in 72 countries with 25 years know-how. This starts lines from zero, solves issues fast, aids growth with lower cost and less worry.
| Customer Reviews
Customers say engineers teach clear and help fast on site. The Automatic solder paste printing machine gets good words for exact prints and few stops even in long shifts. Packing with foam and crates keeps safe on long ships. Calls or remote fix problems in hours. Customers feel trust, lines stay up, and they make more LED boards every day.
| Certifications and Standards
I.C.T has CE for safe, RoHS for clean parts, ISO9001 for good control. Many patents on cleaning save, quick switch, crash stop, glue tool, error find, print force, process, quality stent, stencil wipe, lift speed, belt move. Even G company copies some from I.C.T. These make 1.2m solder paste printer safe and new for world sales with high trust.
| About I.C.T Company and Our Factory
I.C.T has own R&D and build with 89 staff, 20 engineers, grows fast since 2012. We serve 1600 customers in 72 countries with full SMT. 12,000m² park checks parts in, builds exact, tests long, controls quality tight. This means low errors, gear lasts over 10 years. Branches mix global and local help. We do honest, simple, open, team, share wins. Customers get from zero lines, upgrades, speed, market change with zero risk.
