The I.C.T-750 is a pneumatic equipment stencil cleaner designed to remove solder paste or red glue from SMT printing stencils. It uses compressed air to power the cleaning process, making it safe for places without electricity. The machine has a strong stainless steel build that resists acid and alkali, lasting up to 10 years. It features rotating spray rods on both sides for even cleaning, keeping the stencil tension stable. You can use solvent or water-based cleaners, and the result is always fully clean.
This pneumatic equipment stencil cleaner recycles liquid through a three-level filter system, which cuts down on waste. It has safety features like an inner-lock door and valve that stop the machine if opened. Parts come from trusted makers, such as Ingersoll Rand for the pump, Koganei for indicators, and Hengstler for timers. Pipes and valves are made of stainless steel. The machine handles stencils up to 750 by 750 by 40 millimeters and cleans in 2 to 4 minutes, dries in 2 to 5 minutes. It needs 0.5 to 0.7 MPa air pressure and 400 to 600 liters per minute flow. Regular use helps keep printing quality high by clearing residue from stencil holes and surfaces. Water-based fluids are safe, with no fire risk, and the process does not harm the stencil. It comes with door keys, air tube, and filter cartridges.
Features:
The I.C.T-750 pneumatic equipment stencil cleaner provides a simple way to maintain SMT stencils. It runs on compressed air, with no need for power outlets, and completes cleaning and drying in one cycle. Press one button to start, and it sprays liquid from rotating rods while filtering and reusing it. This keeps costs low and meets safety rules.
Tests show it removes all residue from stencil holes and surfaces in 300 seconds using water-based fluid at normal temperature. You can adjust times or pressure for different needs. It fits in SMT lines to improve product yield by preventing paste buildup.
Effect:
Before Cleaning
After Cleaning
Before Cleaning
After Cleaning
Before Cleaning
After Cleaning
Before Cleaning
After Cleaning
Process:
Durable Steel Construction
The I.C.T-750 uses SUS 304 stainless steel for its main structure, pipes, valves, and filter buckets. This material stands up to acid and alkali, giving the machine a 10-year lifespan. It protects against corrosion in daily use with various cleaning liquids. The build ensures the unit stays reliable over time, with modular parts for easy fixes. Safety comes from the design, like the door that locks during operation and stops if opened. This pneumatic equipment stencil cleaner needs little upkeep, as the filters catch particles at 20um, 5um, and 1um levels. Users report full cleaning without damage to stencils, even after many cycles. It supports both solvent and water-based options, recycling liquid to save resources.
Rotation Spray System
Patented 360-degree rotating spray rods cover both sides of the stencil for even cleaning. This keeps tension steady and removes paste or glue from holes without leaving spots. The system works with compressed air blow-dry to finish the job fast. In tests, it cleared residues completely in 300 seconds at 0.5 MPa. The method uses less liquid since it recycles through filters. It's safe, with no electric parts, and fits stencil hole cleaning machine needs. Parts like the diaphragm pump from Ingersoll Rand ensure smooth runs. Adjust settings for clean time, dry time, or pressure to match production.
Liquid Filter Setup
A three-level filter system with 20um, 5um, and 1um precision reuses cleaning liquid many times. This cuts down on fluid use and waste. The large flow buckets are stainless steel, easy to maintain. It handles water-based or solvent cleaners, with no heating needed. Tests confirm it leaves stencils 100% clean, removing inner wall residues. The setup aligns with environmental rules, as water-based fluids have no flash point. For ultrasonic stencil cleaner users switching over, this offers similar results without power. It comes with extra cartridges for quick swaps.
Air Powered Operation
The machine runs only on compressed air, with no electricity required. This makes it safe for various settings. It uses 400 to 600 L/min flow at 0.5 to 0.7 MPa. Famous parts from global makers, like Koganei indicators and Hengstler timers, keep it reliable. One-button start handles clean and dry steps automatically. For stencil hole cleaning machine tasks, it provides consistent results. The weight is 230 kg, size 800 by 950 by 1650 mm, fitting most factories. It includes safety valves and supports I.C.T services.
English
