English  |
D600 (LENS)
I.C.T
| Quantity: | |
|---|---|
| LENS Glue Dispensing Machine
The LENS Glue Dispensing Machine operates at 800 mm/s across X/Y axes. Positioning repeatability recorded at ±0.015 mm screw, ±0.01 mm motor. Panasonic servo system. Grinding-lead screw drive. Coaxial vision executes Mark correction and edge compensation in real time. Dispense valve maintains constant volume to single-microliter tolerance. Glue preheating module active. Syringe change protocol under sixty seconds. The Liquid Dispenser Machine integrates via SMEMA into existing SMT architecture. Recorded uptime across seventy-two countries exceeds 99.8 %.
| Detailed Product Features
The valve dispenses. Glue volume remains identical cycle after cycle. Servo and screw enforce the specification. Preheating maintains 0.1 °C. Red glue, silicone, UV-cure, hot-melt — all conform. Syringe replacement logged at fifty-five seconds average. Purge purge cycle eight seconds. No satellites recorded. The LENS Glue Dispensing Machine produces uniform bond lines without deviation.
Anti-static belts receive the board. Independent motors synchronize left and right. Stop mechanism engages. Board position locked. Rail parallelism held within 0.02 mm during width adjustment. Maximum board 600 × 600 mm, five kilograms. Transport velocity 300 mm/s in four directions. The Liquid Dispenser Machine transfers boards without positional error.
Single command initiates purge. Eight-second cycle clears nozzle. Temperature control loop maintains viscosity specification across shift. No manual cleaning required. The LENS Glue Dispensing Machine remains in ready state between production runs.
PLC interfaces with industrial PC. Components restricted to Panasonic servo, Omron relay, Schneider breaker. CE compliance documented. Industry 4.0 protocol embedded. MES connectivity standard. Expansion ports prepared for 3D height sensor and UV cure. Operator interface requires sixty minutes to mastery. The Liquid Dispenser Machine executes program without interruption.
| Specification
| Model | I.C.T-D450 | I.C.T-D600(LENS) | I.C.T-D1200(LENS) |
| Dispensing Range | X400*Y400*Z50mm | X600*Y400*Z50mm | X1200*Y400*Z50mm |
| Product Weight | Max.4.5kg | ||
| Product Thickness | Max.6mm | ||
| Maximum Speed | 2000mm/s | ||
| Vision Methodology | CCD | ||
| Cleaning System | Auto | ||
| Injection Valve Speed | 200 points/s | ||
| Dispensing Accuracy | ±0.02mm | ||
| Repeated Accuracy | ±0.01mm | ||
| Weight | 650 Kg | 750 Kg | 950 Kg |
| Dimension | W770*D1200*H1500mm | W880*D1200*H1500mm | W1590*D1200*H1500mm |
| SMT Line Equipment List
Magazine loaded. Automatic loader advances board. LENS Glue Dispensing Machine executes pattern at 800 mm/s. Pick-and-place positions lenses on wet adhesive. IR or UV oven completes cure within seconds. Optional AOI performs volume and position verification. All stations communicate via SMEMA. Typical staffing requirement one to two operators. First-pass yield recorded above 99.5 %. Uptime sustained. Automotive, medical, LED applications compliant. Complete Liquid Dispenser Machine line delivered under single responsibility contract.
| Product Name | Purpose in Glue Dispensing Line |
|---|---|
| Glue Dispensing Machine | Delivers high-speed, ultra-precise glue dispensing |
| Conformal Coating Machine | Applies final protective coating for reliability |
| Pick and Place Machine | Accurately places components onto fresh glue |
| Curing Oven | Rapidly cures glue with IR or UV technology |
| Customer Success Story
Two engineers dispatched to Dushanbe. Customer contract included two SMT lines, one DIP line, one conformal coating line, one glue line, one complete LED bulb assembly line. Installation duration ten days. LENS Glue Dispensing Machine achieved 100 % dot placement on first board. Pick-and-place, curing, AOI stations accepted same day. Local operators certified independent on day ten. Customer acceptance protocol signed. Video testimony recorded.
| Professional Training & Support
Engineers remain on site until customer demonstrates full autonomy. Remote diagnostics resolve eighty percent of incidents within one hour. Critical components stocked in eight global warehouses, same-day dispatch. On-site response within forty-eight hours worldwide. Software revisions and process optimization provided free for equipment lifetime. The Liquid Dispenser Machine achieves documented return on investment within twelve months.
| Customer Praise
“Engineers knew every screw.” “Glue dots never move.” “Wooden crates survived 8 000 km without a scratch.” “Remote team fixed the alarm at 2 a.m. my time.” “Line has not stopped in fourteen months.” Same words, different countries, same SMT glue machine.
| Our Certification
CE Declaration of Conformity. RoHS compliance certificate. ISO9001:2015 registration. Multiple patents issued. Each LENS Glue Dispensing Machine accompanied by individual test data sheet and serialized traceability record.
| About Us and Factory
Manufacturing and headquarters: Dongguan, China. Facility area 12 000 m². Personnel 89. Engineering staff 20. Registered capital USD 30 million. Established 2012. Customer installations 1 600. Countries served 72. Every LENS Glue Dispensing Machine completes 100 % load test prior to shipment.
| LENS Glue Dispensing Machine
The LENS Glue Dispensing Machine operates at 800 mm/s across X/Y axes. Positioning repeatability recorded at ±0.015 mm screw, ±0.01 mm motor. Panasonic servo system. Grinding-lead screw drive. Coaxial vision executes Mark correction and edge compensation in real time. Dispense valve maintains constant volume to single-microliter tolerance. Glue preheating module active. Syringe change protocol under sixty seconds. The Liquid Dispenser Machine integrates via SMEMA into existing SMT architecture. Recorded uptime across seventy-two countries exceeds 99.8 %.
| Detailed Product Features
The valve dispenses. Glue volume remains identical cycle after cycle. Servo and screw enforce the specification. Preheating maintains 0.1 °C. Red glue, silicone, UV-cure, hot-melt — all conform. Syringe replacement logged at fifty-five seconds average. Purge purge cycle eight seconds. No satellites recorded. The LENS Glue Dispensing Machine produces uniform bond lines without deviation.
Anti-static belts receive the board. Independent motors synchronize left and right. Stop mechanism engages. Board position locked. Rail parallelism held within 0.02 mm during width adjustment. Maximum board 600 × 600 mm, five kilograms. Transport velocity 300 mm/s in four directions. The Liquid Dispenser Machine transfers boards without positional error.
Single command initiates purge. Eight-second cycle clears nozzle. Temperature control loop maintains viscosity specification across shift. No manual cleaning required. The LENS Glue Dispensing Machine remains in ready state between production runs.
PLC interfaces with industrial PC. Components restricted to Panasonic servo, Omron relay, Schneider breaker. CE compliance documented. Industry 4.0 protocol embedded. MES connectivity standard. Expansion ports prepared for 3D height sensor and UV cure. Operator interface requires sixty minutes to mastery. The Liquid Dispenser Machine executes program without interruption.
| Specification
| Model | I.C.T-D450 | I.C.T-D600(LENS) | I.C.T-D1200(LENS) |
| Dispensing Range | X400*Y400*Z50mm | X600*Y400*Z50mm | X1200*Y400*Z50mm |
| Product Weight | Max.4.5kg | ||
| Product Thickness | Max.6mm | ||
| Maximum Speed | 2000mm/s | ||
| Vision Methodology | CCD | ||
| Cleaning System | Auto | ||
| Injection Valve Speed | 200 points/s | ||
| Dispensing Accuracy | ±0.02mm | ||
| Repeated Accuracy | ±0.01mm | ||
| Weight | 650 Kg | 750 Kg | 950 Kg |
| Dimension | W770*D1200*H1500mm | W880*D1200*H1500mm | W1590*D1200*H1500mm |
| SMT Line Equipment List
Magazine loaded. Automatic loader advances board. LENS Glue Dispensing Machine executes pattern at 800 mm/s. Pick-and-place positions lenses on wet adhesive. IR or UV oven completes cure within seconds. Optional AOI performs volume and position verification. All stations communicate via SMEMA. Typical staffing requirement one to two operators. First-pass yield recorded above 99.5 %. Uptime sustained. Automotive, medical, LED applications compliant. Complete Liquid Dispenser Machine line delivered under single responsibility contract.
| Product Name | Purpose in Glue Dispensing Line |
|---|---|
| Glue Dispensing Machine | Delivers high-speed, ultra-precise glue dispensing |
| Conformal Coating Machine | Applies final protective coating for reliability |
| Pick and Place Machine | Accurately places components onto fresh glue |
| Curing Oven | Rapidly cures glue with IR or UV technology |
| Customer Success Story
Two engineers dispatched to Dushanbe. Customer contract included two SMT lines, one DIP line, one conformal coating line, one glue line, one complete LED bulb assembly line. Installation duration ten days. LENS Glue Dispensing Machine achieved 100 % dot placement on first board. Pick-and-place, curing, AOI stations accepted same day. Local operators certified independent on day ten. Customer acceptance protocol signed. Video testimony recorded.
| Professional Training & Support
Engineers remain on site until customer demonstrates full autonomy. Remote diagnostics resolve eighty percent of incidents within one hour. Critical components stocked in eight global warehouses, same-day dispatch. On-site response within forty-eight hours worldwide. Software revisions and process optimization provided free for equipment lifetime. The Liquid Dispenser Machine achieves documented return on investment within twelve months.
| Customer Praise
“Engineers knew every screw.” “Glue dots never move.” “Wooden crates survived 8 000 km without a scratch.” “Remote team fixed the alarm at 2 a.m. my time.” “Line has not stopped in fourteen months.” Same words, different countries, same SMT glue machine.
| Our Certification
CE Declaration of Conformity. RoHS compliance certificate. ISO9001:2015 registration. Multiple patents issued. Each LENS Glue Dispensing Machine accompanied by individual test data sheet and serialized traceability record.
| About Us and Factory
Manufacturing and headquarters: Dongguan, China. Facility area 12 000 m². Personnel 89. Engineering staff 20. Registered capital USD 30 million. Established 2012. Customer installations 1 600. Countries served 72. Every LENS Glue Dispensing Machine completes 100 % load test prior to shipment.
