English  |
Production Line for PCBA SMT PCB Assembly
I.C.T
| Quantity: | |
|---|---|
| Production Line for PCBA
I.C.T offers a complete Production Line for PCBA from three owned factories and more than 22 years of SMT experience. We give full factory planning, custom layouts, labor advice, and ROI numbers for PCBA makers. Lines come semi-auto or full-auto with loaders, printers, placers, reflow ovens, AOI, and unloaders. One operator runs the shift. Power stays low at 18Kw/H. We help electronics firms worldwide. Setup takes just 3 days with air, power, exhaust, lighting, and 23±0.9°C checks. Training runs 7-15 days on software, care, safety, and fixes. Our 15-year global service keeps lines strong. This turnkey system gets your PCBA factory going fast, grows easy, and cuts risk for new or big players in the market with solid help and real results.
| Detailed Product Features
Seamless Automation Flow
The Production Line for PCBA links all machines with smart software for live data and higher yields on circuit boards. Loaders take different sizes. Printers add paste with camera help on chips and traces. Placers drop tiny 01005 parts quick. Reflow holds ±0.9°C for good solder. AOI finds bad spots with AI. Unloaders sort boards. Yields go up over 25% in Production Line for PCBA SMT PCB Assembly. Fits small or big boards. Buffers keep pace even, remote tools let you watch, auto recipes change fast, and tracking follows every part for mix jobs with less stop and full rules.
Accurate Paste System
Printers on the Production Line for PCBA lock stencils super exact and fit frames for board sizes. Quick changes cut wait. Auto fill and clean keep prints the same. 3D checks measure paste to stop early bad. This is key for packed layouts or fine lines. It works with many paste kinds, low-heat for soft parts. The squeegee changes for even cover on bumpy boards, lifts print good, drops waste, lets fast new in changing work with steady results, more speed, less fix, and bigger count each shift.
Component Placement Module
Placers in the Production Line for PCBA use JUKI power for quick, right chip drops on boards. They take 01005 to big parts no stop. Cameras guide every place for no wrong. Multi-heads push speed high. Feeders reload auto for non-stop. Software fits board types for easy start. This cuts errors in full setups, boosts line speed, handles mix board sizes in one run with simple switch, smart set, and sure repeat for daily high-volume board making.
Reliable Reflow Process
Ovens have 12+ zones with own air flow for even heat in the Production Line for PCBA. Nitrogen makes tough joints for board power or links. Profiles fit board needs auto. Cooling stops bend in big boards. Heat save gets 18Kw/H. Touch screens hold many profiles. Must for board last long. Conveyors link software for right speed, easy change, built checks to no stop in long runs, safe hand off, help big make non-stop, and green power.
Smart Inspection Tools
AOI grabs 8K pics fast, spots wrong or solder bad in boards. AI gets smarter from work. It sends fix to placers quick. Drops bad in Production Line for PCBA. Gives reports for better ways. Auto bad go side no stop, save info for look and fast fix in many kinds with less down, good track, and auto notes.
| Factory Layout Requirements
| Category | Projects | Details |
|---|---|---|
| Factory Layout Requirements | Factory Air Circuit Layout | Use factory air source or separate oil-free compressed air machine. Pressure should be greater than 7kg/cm². |
| Factory Electrical Layout | Single-phase AC220 (220±10%, 50/60Hz) Three-phase AC 380V (380±10%, 50/60Hz) | |
| Factory Exhaust Layout | The minimum flow rate of the exhaust duct is 500 cubic feet per minute (14.15m³/min) | |
| Factory Lighting Layout | The ideal illumination in the factory is 800~1200LUX, at least not less than 300LUX. | |
| Factory Temperature Layout | The ambient temperature of the production workshop is 23±3°C, generally 17~28°C, and the relative humidity is 45%~70%RH. | |
| Material Preparation | BOM List | List all parts and quantities needed for PCBA Production Line assembly. |
| CAD File | Digital design file to plan PCB layout and machine setup. | |
| Gerber File | Standard file for PCB manufacturing and printing stencil. | |
| Solder Paste | Material applied on pads before placing components in printer. | |
| SMD Component Materials | Surface mount parts like chips and resistors for placement. | |
| Industrial Alcohol | Used to clean boards and stencils during setup process. | |
| Splice Belt | Tape to connect feeder reels without stopping the line. | |
| Stencil | Metal sheet with holes to print solder paste accurately. |
| SMT Line Equipment List
I.C.T High Quality PCBA Production Line features advanced equipment for efficient and precise PCB assembly. The fully automated SMT line includes a loader, an auto printer for accurate solder paste application, a pick-and-place machine for precise component placement, a reflow oven for reliable soldering, and an AOI system for thorough defect inspection. This High Quality PCBA Production Line ensures smooth operation, high reliability, and low-cost SMT assembly, meeting diverse industry requirements.
| Product Name | Purpose in SMT Line |
|---|---|
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| PCB Conveyor | Conveyor transports PCBs during manufacturing. |
| Pick and Place Machine | Mounts components onto PCB precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
| Traceability Equipment | Records and tracks production data: Laser Marking Machine/Label Mounter/Inkjet Printer |
| SMT Cleaning Machine | Used for cleaning PCBs, stencils, fixtures, nozzles, etc. |
| PCB Routing Machine | Cut the PCBA into the final product |
| Customer Success Video
An Algerian client making phones came to our factory for test run. They brought more than ten PCBs and materials. We ran live production to show real work. Full-auto printer put paste perfect. SPI checked every spot. RX-8 did small parts fast. RS-1R placed big ones right. Tray feeder gave shields no stop. Reflow soldered strong. AOI found nothing wrong. 5700 cut panels clean. Full run was smooth and quick. This demo shows how Production Line for PCBA fits phone or other work. Client loved speed and quality. They approved boards and plan same line at home.
| End-to-End Support System
I.C.T gives full help for the Production Line for PCBA from day one to years later. Our team sets up in 3 days with all checks. Engineers train your people 7-15 days on machines and software. We share upkeep tips, upgrades, and parts fast. Service covers the world with 15 years know-how. Managers fix problems quick by phone or visit. Assistants make sure nothing missed. We help make lines better over time for faster run and less stop. Remote help works instant. Yearly visits keep gear fresh with new tips and changes.
| User Feedback Highlights
Customers like our engineers' quick help overseas for the Production Line for PCBA. They say equipment runs steady with little down time. Packing keeps machines safe in ship. Fast answers fix issues in hours. Lines work good with high make every day. Training gets new staff ready quick.
| Quality Standards Met
I.C.T holds CE for safe work, RoHS for no bad stuff, ISO9001 for quality way, and patents for new ideas. These show our Production Line for PCBA is good and safe all over world. We test every machine full before send.
| About I.C.T Company and Factory
I.C.T has own R&D and three factories with lots staff and 20 engineers. We grow quick over 25 years and help 1600 clients in 72 countries. Factories big 12000m² with hard tests and quality rules every step. We give full help worldwide for PCBA. Own make means fast send and good price. Come see our real work any time.
| Production Line for PCBA
I.C.T offers a complete Production Line for PCBA from three owned factories and more than 22 years of SMT experience. We give full factory planning, custom layouts, labor advice, and ROI numbers for PCBA makers. Lines come semi-auto or full-auto with loaders, printers, placers, reflow ovens, AOI, and unloaders. One operator runs the shift. Power stays low at 18Kw/H. We help electronics firms worldwide. Setup takes just 3 days with air, power, exhaust, lighting, and 23±0.9°C checks. Training runs 7-15 days on software, care, safety, and fixes. Our 15-year global service keeps lines strong. This turnkey system gets your PCBA factory going fast, grows easy, and cuts risk for new or big players in the market with solid help and real results.
| Detailed Product Features
Seamless Automation Flow
The Production Line for PCBA links all machines with smart software for live data and higher yields on circuit boards. Loaders take different sizes. Printers add paste with camera help on chips and traces. Placers drop tiny 01005 parts quick. Reflow holds ±0.9°C for good solder. AOI finds bad spots with AI. Unloaders sort boards. Yields go up over 25% in Production Line for PCBA SMT PCB Assembly. Fits small or big boards. Buffers keep pace even, remote tools let you watch, auto recipes change fast, and tracking follows every part for mix jobs with less stop and full rules.
Accurate Paste System
Printers on the Production Line for PCBA lock stencils super exact and fit frames for board sizes. Quick changes cut wait. Auto fill and clean keep prints the same. 3D checks measure paste to stop early bad. This is key for packed layouts or fine lines. It works with many paste kinds, low-heat for soft parts. The squeegee changes for even cover on bumpy boards, lifts print good, drops waste, lets fast new in changing work with steady results, more speed, less fix, and bigger count each shift.
Component Placement Module
Placers in the Production Line for PCBA use JUKI power for quick, right chip drops on boards. They take 01005 to big parts no stop. Cameras guide every place for no wrong. Multi-heads push speed high. Feeders reload auto for non-stop. Software fits board types for easy start. This cuts errors in full setups, boosts line speed, handles mix board sizes in one run with simple switch, smart set, and sure repeat for daily high-volume board making.
Reliable Reflow Process
Ovens have 12+ zones with own air flow for even heat in the Production Line for PCBA. Nitrogen makes tough joints for board power or links. Profiles fit board needs auto. Cooling stops bend in big boards. Heat save gets 18Kw/H. Touch screens hold many profiles. Must for board last long. Conveyors link software for right speed, easy change, built checks to no stop in long runs, safe hand off, help big make non-stop, and green power.
Smart Inspection Tools
AOI grabs 8K pics fast, spots wrong or solder bad in boards. AI gets smarter from work. It sends fix to placers quick. Drops bad in Production Line for PCBA. Gives reports for better ways. Auto bad go side no stop, save info for look and fast fix in many kinds with less down, good track, and auto notes.
| Factory Layout Requirements
| Category | Projects | Details |
|---|---|---|
| Factory Layout Requirements | Factory Air Circuit Layout | Use factory air source or separate oil-free compressed air machine. Pressure should be greater than 7kg/cm². |
| Factory Electrical Layout | Single-phase AC220 (220±10%, 50/60Hz) Three-phase AC 380V (380±10%, 50/60Hz) | |
| Factory Exhaust Layout | The minimum flow rate of the exhaust duct is 500 cubic feet per minute (14.15m³/min) | |
| Factory Lighting Layout | The ideal illumination in the factory is 800~1200LUX, at least not less than 300LUX. | |
| Factory Temperature Layout | The ambient temperature of the production workshop is 23±3°C, generally 17~28°C, and the relative humidity is 45%~70%RH. | |
| Material Preparation | BOM List | List all parts and quantities needed for PCBA Production Line assembly. |
| CAD File | Digital design file to plan PCB layout and machine setup. | |
| Gerber File | Standard file for PCB manufacturing and printing stencil. | |
| Solder Paste | Material applied on pads before placing components in printer. | |
| SMD Component Materials | Surface mount parts like chips and resistors for placement. | |
| Industrial Alcohol | Used to clean boards and stencils during setup process. | |
| Splice Belt | Tape to connect feeder reels without stopping the line. | |
| Stencil | Metal sheet with holes to print solder paste accurately. |
| SMT Line Equipment List
I.C.T High Quality PCBA Production Line features advanced equipment for efficient and precise PCB assembly. The fully automated SMT line includes a loader, an auto printer for accurate solder paste application, a pick-and-place machine for precise component placement, a reflow oven for reliable soldering, and an AOI system for thorough defect inspection. This High Quality PCBA Production Line ensures smooth operation, high reliability, and low-cost SMT assembly, meeting diverse industry requirements.
| Product Name | Purpose in SMT Line |
|---|---|
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| PCB Conveyor | Conveyor transports PCBs during manufacturing. |
| Pick and Place Machine | Mounts components onto PCB precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
| Traceability Equipment | Records and tracks production data: Laser Marking Machine/Label Mounter/Inkjet Printer |
| SMT Cleaning Machine | Used for cleaning PCBs, stencils, fixtures, nozzles, etc. |
| PCB Routing Machine | Cut the PCBA into the final product |
| Customer Success Video
An Algerian client making phones came to our factory for test run. They brought more than ten PCBs and materials. We ran live production to show real work. Full-auto printer put paste perfect. SPI checked every spot. RX-8 did small parts fast. RS-1R placed big ones right. Tray feeder gave shields no stop. Reflow soldered strong. AOI found nothing wrong. 5700 cut panels clean. Full run was smooth and quick. This demo shows how Production Line for PCBA fits phone or other work. Client loved speed and quality. They approved boards and plan same line at home.
| End-to-End Support System
I.C.T gives full help for the Production Line for PCBA from day one to years later. Our team sets up in 3 days with all checks. Engineers train your people 7-15 days on machines and software. We share upkeep tips, upgrades, and parts fast. Service covers the world with 15 years know-how. Managers fix problems quick by phone or visit. Assistants make sure nothing missed. We help make lines better over time for faster run and less stop. Remote help works instant. Yearly visits keep gear fresh with new tips and changes.
| User Feedback Highlights
Customers like our engineers' quick help overseas for the Production Line for PCBA. They say equipment runs steady with little down time. Packing keeps machines safe in ship. Fast answers fix issues in hours. Lines work good with high make every day. Training gets new staff ready quick.
| Quality Standards Met
I.C.T holds CE for safe work, RoHS for no bad stuff, ISO9001 for quality way, and patents for new ideas. These show our Production Line for PCBA is good and safe all over world. We test every machine full before send.
| About I.C.T Company and Factory
I.C.T has own R&D and three factories with lots staff and 20 engineers. We grow quick over 25 years and help 1600 clients in 72 countries. Factories big 12000m² with hard tests and quality rules every step. We give full help worldwide for PCBA. Own make means fast send and good price. Come see our real work any time.
