English  |
I.C.T-P3
I.C.T
| Quantity: | |
|---|---|
| Compact Semi Automatic SMT Stencil Printer
Labs and new workshops choose the semi auto stencil printer for its Taiwan TBI rails and Omron sensors that lock ±0.05mm on mini panels. Independent cylinders guide squeegees over twin rails to avoid paste bridges or thin spots. The bench with magnetic pins and adjustable blocks holds 0.2-6mm boards – swap sides without tools. A simple English panel with demo videos picks hand, part-auto or auto runs. Low 200W use and 8-second loops make the stable work semi automatic SMT stencil printer ideal for medical sensors, LED drivers and prototype electronics with easy daily operation.
| Feature
Magnetic pins insert into grid slots in seconds for unique single or double board setups while soft blocks keep edges level. Taiwan rails and Leadshine motor stop all wobble at speeds up to 200mm/sec. Hand squeegee raise opens space for quick paste mix or wipe. Smart sensors trim back travel by 25% to lower air needs. This setup turns the SMT stencil printer semi automatic from 50×50mm samples to full 300×350mm sheets in less than 30 seconds with no extra holders.
Lone cylinders adjust downforce per squeegee as double rails ensure 0.01mm alignment end to end. Visible meter and knob control exact speed for smooth paste flow. The 7-inch English screen stores 40 programs, shows real-time camera view and flips modes with one button. Delta power, IGUS links and FESTO air keep the semi-automatic PCB stencil printer going strong through shifts with just monthly checks.
| Specification
| Model | P3 | P6 | P12 | P15 |
| Accuracy | +/- 0.05mm | +/- 0.05mm | +/- 0.05mm | +/- 0.05mm |
| PCB Size | 300 x 350 mm | 600 x 350 mm | 1200 x 350 mm | 1500 x 350 mm |
| Platform size | 320 x 400 mm | 700 x 400 mm | 1350 x 400 mm | 1650 x 400 mm |
| Stencil Size(mm) | 370*470-550*650 | 370*470-550*650 | 370*470-1500*650 | 370*470-1750*650 |
| PCB Thickness | 0.2 - 6 mm | 0.2 - 6 mm | 0.2 - 6 mm | 0.2 - 6 mm |
| Stencil Positioning | Manual | Manual | Manual | Manual |
| Cycle Time | < 10 Sec. | < 10 Sec. | < 12 Sec. | < 12 Sec. |
| Power Consumption | 200 W | 200 W | 220 W | 220 W |
| Power Supply | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ |
| Air Pressure | 4.5-6 kg/cm | 4.5-6 kg/cm | 4.5-6 kg/cm | 4.5-6 kg/cm |
| Squeegee Speed | 0-200mm/sec | 0-1200mm/sec | 0-200mm/sec | 0-200mm/sec |
| Dimension | 850x750x1650 mm | 1050x750x1650 mm | 1660x750x1650 mm | 2100x750x1650 mm |
| Weight | 280 Kg | 300 Kg | 356 Kg | 430 Kg |
| Squeegee Length | 250mm | 250mm | 250mm | 250mm |
| Platform Height | 950mm | 950mm | 950mm | 950mm |
| Option: Special size can be customized | ||||
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| SMT Line Equipment List
I.C.T High Quality PCBA Production Line features advanced equipment for efficient and precise PCB assembly. The fully automated SMT line includes a loader, an auto printer for accurate solder paste application, a pick-and-place machine for precise component placement, a reflow oven for reliable soldering, and an AOI system for thorough defect inspection. This High Quality PCBA Production Line ensures smooth operation, high reliability, and low-cost SMT assembly, meeting diverse industry requirements.
| Product Name | Purpose in SMT Line |
|---|---|
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
Inspects internal solder joint integrity and detects hidden defects. | |
| SMT Cleaning Machine | Used for cleaning PCBs, stencils, fixtures, nozzles, etc. |
| PCB Cutting Machine | Cut the PCBA into the final product |
| Traceability Equipment | Records and tracks production data: Laser Marking Machine/Label Mounter/Inkjet Printer |
| Customer Success Case Study – Saudi Arabia LED Factory
A Saudi client acquired the complete SMT setup from I.C.T, centered on the Semi automatic SMT stencil printer, plus JUKI RS-1R placer and L8 reflow for LED bulb lamps. Our two engineers crossed the sea to the client's Riyadh plant, handled every step of machine placement and connections, then led seven full days of practical coaching from paste prep to fine print tweaks. The setup delivered instant volume with spot-on paste on 300mm LED parts and zero startup flaws. The buyer highlighted the expert overseas arrival, crates that stayed perfect over distances, and direct training that cut weeks off their schedule.
| Global Service & Training Support
I.C.T covers all bases to make starts smooth: no-cost floor plans, 48-hour pre-ship runs, arrival assembly, 7-10 day team workshops, year-one spares pack, unlimited app or video remote fixes, and output improvement calls. Twenty pros handle 72 countries with 4-hour sure answers and always-ready urgent line. Each Semi automatic SMT stencil printer gets full-load aging and pass scans in our 12,000m² ISO9001 space. Users enjoy no-risk entry, quick gains, and bonds that strengthen over time.
| Customer Reviews
1600+ sites across 72 lands rely on I.C.T total packages and borderless aid. They praise spot-on plans for tight rooms, tough boxes that beat rough routes, deep sessions that turn new hands expert, instant camera-guided solves, and regular checks that lift speed 20%. Plants buy more setups, noting top yields, saved cash and easy days as keys to loyal ties and group success.
| Certifications and Standards
All Semi automatic SMT stencil printer units hold CE, RoHS, ISO9001:2015 and five patents. Own lab EMI scans and 100% checks match EU/US green and safe rules. These marks back safe flux use, no interference, worker guard and decade-long build – sure trust from first boot.
| About I.C.T Company and Our Factory
I.C.T started in 2012 and now runs a 12,000m² Dongguan hub with 89 team and 20 inventors. We plan, shape, wire and prove every unit in ISO9001 flow. Over 1600 partners in 72 areas spark fast rises via solid tools, clear deals and non-stop upgrades. Eight world spots and stock points send aid in two days max.
| Compact Semi Automatic SMT Stencil Printer
Labs and new workshops choose the semi auto stencil printer for its Taiwan TBI rails and Omron sensors that lock ±0.05mm on mini panels. Independent cylinders guide squeegees over twin rails to avoid paste bridges or thin spots. The bench with magnetic pins and adjustable blocks holds 0.2-6mm boards – swap sides without tools. A simple English panel with demo videos picks hand, part-auto or auto runs. Low 200W use and 8-second loops make the stable work semi automatic SMT stencil printer ideal for medical sensors, LED drivers and prototype electronics with easy daily operation.
| Feature
Magnetic pins insert into grid slots in seconds for unique single or double board setups while soft blocks keep edges level. Taiwan rails and Leadshine motor stop all wobble at speeds up to 200mm/sec. Hand squeegee raise opens space for quick paste mix or wipe. Smart sensors trim back travel by 25% to lower air needs. This setup turns the SMT stencil printer semi automatic from 50×50mm samples to full 300×350mm sheets in less than 30 seconds with no extra holders.
Lone cylinders adjust downforce per squeegee as double rails ensure 0.01mm alignment end to end. Visible meter and knob control exact speed for smooth paste flow. The 7-inch English screen stores 40 programs, shows real-time camera view and flips modes with one button. Delta power, IGUS links and FESTO air keep the semi-automatic PCB stencil printer going strong through shifts with just monthly checks.
| Specification
| Model | P3 | P6 | P12 | P15 |
| Accuracy | +/- 0.05mm | +/- 0.05mm | +/- 0.05mm | +/- 0.05mm |
| PCB Size | 300 x 350 mm | 600 x 350 mm | 1200 x 350 mm | 1500 x 350 mm |
| Platform size | 320 x 400 mm | 700 x 400 mm | 1350 x 400 mm | 1650 x 400 mm |
| Stencil Size(mm) | 370*470-550*650 | 370*470-550*650 | 370*470-1500*650 | 370*470-1750*650 |
| PCB Thickness | 0.2 - 6 mm | 0.2 - 6 mm | 0.2 - 6 mm | 0.2 - 6 mm |
| Stencil Positioning | Manual | Manual | Manual | Manual |
| Cycle Time | < 10 Sec. | < 10 Sec. | < 12 Sec. | < 12 Sec. |
| Power Consumption | 200 W | 200 W | 220 W | 220 W |
| Power Supply | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ |
| Air Pressure | 4.5-6 kg/cm | 4.5-6 kg/cm | 4.5-6 kg/cm | 4.5-6 kg/cm |
| Squeegee Speed | 0-200mm/sec | 0-1200mm/sec | 0-200mm/sec | 0-200mm/sec |
| Dimension | 850x750x1650 mm | 1050x750x1650 mm | 1660x750x1650 mm | 2100x750x1650 mm |
| Weight | 280 Kg | 300 Kg | 356 Kg | 430 Kg |
| Squeegee Length | 250mm | 250mm | 250mm | 250mm |
| Platform Height | 950mm | 950mm | 950mm | 950mm |
| Option: Special size can be customized | ||||
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| SMT Line Equipment List
I.C.T High Quality PCBA Production Line features advanced equipment for efficient and precise PCB assembly. The fully automated SMT line includes a loader, an auto printer for accurate solder paste application, a pick-and-place machine for precise component placement, a reflow oven for reliable soldering, and an AOI system for thorough defect inspection. This High Quality PCBA Production Line ensures smooth operation, high reliability, and low-cost SMT assembly, meeting diverse industry requirements.
| Product Name | Purpose in SMT Line |
|---|---|
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
Inspects internal solder joint integrity and detects hidden defects. | |
| SMT Cleaning Machine | Used for cleaning PCBs, stencils, fixtures, nozzles, etc. |
| PCB Cutting Machine | Cut the PCBA into the final product |
| Traceability Equipment | Records and tracks production data: Laser Marking Machine/Label Mounter/Inkjet Printer |
| Customer Success Case Study – Saudi Arabia LED Factory
A Saudi client acquired the complete SMT setup from I.C.T, centered on the Semi automatic SMT stencil printer, plus JUKI RS-1R placer and L8 reflow for LED bulb lamps. Our two engineers crossed the sea to the client's Riyadh plant, handled every step of machine placement and connections, then led seven full days of practical coaching from paste prep to fine print tweaks. The setup delivered instant volume with spot-on paste on 300mm LED parts and zero startup flaws. The buyer highlighted the expert overseas arrival, crates that stayed perfect over distances, and direct training that cut weeks off their schedule.
| Global Service & Training Support
I.C.T covers all bases to make starts smooth: no-cost floor plans, 48-hour pre-ship runs, arrival assembly, 7-10 day team workshops, year-one spares pack, unlimited app or video remote fixes, and output improvement calls. Twenty pros handle 72 countries with 4-hour sure answers and always-ready urgent line. Each Semi automatic SMT stencil printer gets full-load aging and pass scans in our 12,000m² ISO9001 space. Users enjoy no-risk entry, quick gains, and bonds that strengthen over time.
| Customer Reviews
1600+ sites across 72 lands rely on I.C.T total packages and borderless aid. They praise spot-on plans for tight rooms, tough boxes that beat rough routes, deep sessions that turn new hands expert, instant camera-guided solves, and regular checks that lift speed 20%. Plants buy more setups, noting top yields, saved cash and easy days as keys to loyal ties and group success.
| Certifications and Standards
All Semi automatic SMT stencil printer units hold CE, RoHS, ISO9001:2015 and five patents. Own lab EMI scans and 100% checks match EU/US green and safe rules. These marks back safe flux use, no interference, worker guard and decade-long build – sure trust from first boot.
| About I.C.T Company and Our Factory
I.C.T started in 2012 and now runs a 12,000m² Dongguan hub with 89 team and 20 inventors. We plan, shape, wire and prove every unit in ISO9001 flow. Over 1600 partners in 72 areas spark fast rises via solid tools, clear deals and non-stop upgrades. Eight world spots and stock points send aid in two days max.
