English  |
RS-1R
JUKI
| Quantity: | |
|---|---|
| JUKI Automatic Chip Mounter
The JUKI automatic chip mounter stands as the central force in SMT production lines, mounting surface components on PCBs with raw speed and steady accuracy to keep the whole operation pushing forward without break. RS series models balance high placement rates with flexibility for different board sizes, handling small chips to larger parts in demanding shifts. RX series models drive maximum output in tight spaces, delivering top performance per square meter under pressure. These machines link directly with printers, reflow ovens, AOI inspection, and conveyors to create complete, hard-working lines. They tackle LED assembly, smartphone PCBs, bar phones, automotive electronics, and general boards. I.C.T constructs full factory systems around them, from layout to daily grind, ensuring endurance, low defects, and consistent output in real production battles.
| JUKI Pick and Place Machine Model Features
RS-1R / RS-1XL Series Features
The RS-1R and RS-1XL serve as tough, all-purpose mounters built to handle the grind of standard SMT lines. The RS-1R pushes 47,000 CPH optimum with placement accuracy of ±35µm (Cpk ≥1) and takes boards from 50×50 mm to 650×370 mm single clamping or up to 1,200×370 mm double clamping. The RS-1XL stretches board width to 650×560 mm, ready for larger LED panels and heavy-duty applications. Both run the Takumi head to place parts from 0201 metric up to 74 mm square or 150×50 mm long. They carry up to 112 feeders for quick job switches. Compact build fits tight lines, while vision cameras and force control keep placement sharp and gentle. These models endure mixed production runs and deliver steady results through long, demanding shifts.
RX-7R / RX-8 Series Features
The RX-7R and RX-8 fight for maximum output when factory space stays scarce and volume runs high. The RX-7R hits 75,000 CPH with parallel heads, placing components from 03015 size to 25 mm square on boards up to 510×450 mm single lane. The RX-8 charges to 100,000 CPH optimum with the P20 head, built for dense small-part work in relentless production. Both hold a narrow 998 mm width, claiming the highest placement rates per square meter. They use coaxial lighting for clear recognition, low-impact placement to protect boards, and monitoring to cut idle time. Dual lanes and data links with other equipment keep lines moving strong. These machines conquer high-volume tasks—LED strips, smartphone PCBs, automotive parts—where every inch and every second counts in the fight for efficiency.
| Specification
| Parameter | RS-1R | RS-1XL | RX-7R | RX-8 |
|---|---|---|---|---|
| Placement Speed (Optimum CPH) | 47,000 | 42,000 | 75,000 | 100,000 |
| Maximum Board Size (mm) | 650 × 370 (single/double) | 650 × 560 | 510 × 450 (single lane) | 510 × 450 (approx.) |
| Minimum Board Size (mm) | 50 × 50 | 50 × 50 | 50 × 50 | 50 × 50 |
| Component Height (max mm) | 25 | 25 | 3-10.5 (head dependent) | 3 |
| Smallest Component | 0201 (metric) | 0201 (metric) | 03015 (metric) | 0201 (approx. 0.4×0.2mm) |
| Largest Component (mm) | 74 square / 150×50 | 74 square / 150×50 | 25 square | 5 square |
| Feeder Inputs (max) | 112 | 112 | 76 | 56 (approx.) |
| Placement Accuracy | ±35µm (Cpk ≥1) | ±35µm (Cpk ≥1) | ±40µm (approx.) | High precision (vision) |
| Machine Width (mm) | 1,500 (approx.) | 2,109 | 998 | 998 |
| Head Type | Takumi inline head | Takumi inline head | Parallel rotary heads (P16S) | P20 rotary head |
| SMT Line Equipment List
I.C.T assembles dependable PCBA assembly lines centered on the JUKI SMT equipment for consistent daily performance. Vacuum loaders introduce clean boards from the start. Automatic printers apply paste with exact control. The mounter places every component firmly and true. Multi-zone reflow ovens bond solder evenly and strong. AOI systems inspect closely to catch any flaw early. Conveyors maintain smooth, uninterrupted flow. Yield rises steadily while costs fall away. No unnecessary pauses or rework appear. Lines manage demanding work—automotive power units, LED assemblies, and beyond. Completed boards emerge prepared for final use. I.C.T supports the entire chain from beginning to end.
| Customer Success Video
The video shows a customer laying out their full SMT and DIP lines built for automotive power supply production. The SMT side starts with vacuum loading clean boards, moves through cleaning and precise paste printing, then the JUKI automatic chip mounter places components fast and exact. Boards travel via conveyors to multi-zone reflow soldering, cooling buffers, AOI inspection, and unloading. The DIP process handles wave soldering, board flipping, ICT testing, and secure connections. The footage keeps it real—machines run steady, boards move without jam, placement stays sharp. The customer points out low defects, consistent speed, and quality that holds up to automotive demands. Downtime stays low in regular shifts, proving the line endures the daily push for reliable output.
| Service and Training Support
I.C.T delivers solid, hands-on support for complete factory lines that use JUKI automatic chip mounter machines and other equipment. Engineers go on site for installation and startup work. They run clear training on daily tasks, program setup, maintenance routines, and quick fixes. Remote tools handle problems fast from anywhere. Regular visits keep machines strong over years of hard use. Technical teams help adjust lines for new jobs, better flow, or higher capacity without big stops. With service centers worldwide, help arrives quick no matter the location. This steady backing turns equipment into tough tools that factories rely on for consistent production and long-term endurance.
| Customer Feedback
Customers speak straight about I.C.T engineers who show up ready and fix issues without delay. They praise the JUKI automatic chip mounter for holding strong speed and accuracy through long shifts. Packing comes secure—machines arrive in good shape after long hauls. Questions get answered fast, keeping lines from sitting idle. Many say the full setup runs better than planned, with higher yields and less trouble. Trust grows from reliable gear and people who stand by their word. Factories count on I.C.T as a partner that helps them push through production demands.
| Certifications and Standards
UKI automatic chip mounter machines carry key certifications—CE for European safety rules, RoHS for clean materials, ISO9001 for quality control. Several patents protect placement heads, vision tech, and other core features. These papers show the equipment meets strict global standards for safe, eco-friendly, and consistent work. Factories install them knowing rules stay followed. The certifications prove a serious effort to build durable machines that perform under real conditions without shortcuts.
| About I.C.T Company and Factory
I.C.T runs its own research and development to keep SMT equipment moving forward. The factory stands large, with strict checks at every step from parts in to machines out. Since 2012 the company has grown fast, with many employees and eight branch offices worldwide. It serves over 1600 customers in more than 72 countries. Quality systems track all work so machines hold up in tough daily use. I.C.T gives full factory support—from first plans to later upgrades—helping electronics plants stay strong and efficient across the world.
| JUKI Automatic Chip Mounter
The JUKI automatic chip mounter stands as the central force in SMT production lines, mounting surface components on PCBs with raw speed and steady accuracy to keep the whole operation pushing forward without break. RS series models balance high placement rates with flexibility for different board sizes, handling small chips to larger parts in demanding shifts. RX series models drive maximum output in tight spaces, delivering top performance per square meter under pressure. These machines link directly with printers, reflow ovens, AOI inspection, and conveyors to create complete, hard-working lines. They tackle LED assembly, smartphone PCBs, bar phones, automotive electronics, and general boards. I.C.T constructs full factory systems around them, from layout to daily grind, ensuring endurance, low defects, and consistent output in real production battles.
| JUKI Pick and Place Machine Model Features
RS-1R / RS-1XL Series Features
The RS-1R and RS-1XL serve as tough, all-purpose mounters built to handle the grind of standard SMT lines. The RS-1R pushes 47,000 CPH optimum with placement accuracy of ±35µm (Cpk ≥1) and takes boards from 50×50 mm to 650×370 mm single clamping or up to 1,200×370 mm double clamping. The RS-1XL stretches board width to 650×560 mm, ready for larger LED panels and heavy-duty applications. Both run the Takumi head to place parts from 0201 metric up to 74 mm square or 150×50 mm long. They carry up to 112 feeders for quick job switches. Compact build fits tight lines, while vision cameras and force control keep placement sharp and gentle. These models endure mixed production runs and deliver steady results through long, demanding shifts.
RX-7R / RX-8 Series Features
The RX-7R and RX-8 fight for maximum output when factory space stays scarce and volume runs high. The RX-7R hits 75,000 CPH with parallel heads, placing components from 03015 size to 25 mm square on boards up to 510×450 mm single lane. The RX-8 charges to 100,000 CPH optimum with the P20 head, built for dense small-part work in relentless production. Both hold a narrow 998 mm width, claiming the highest placement rates per square meter. They use coaxial lighting for clear recognition, low-impact placement to protect boards, and monitoring to cut idle time. Dual lanes and data links with other equipment keep lines moving strong. These machines conquer high-volume tasks—LED strips, smartphone PCBs, automotive parts—where every inch and every second counts in the fight for efficiency.
| Specification
| Parameter | RS-1R | RS-1XL | RX-7R | RX-8 |
|---|---|---|---|---|
| Placement Speed (Optimum CPH) | 47,000 | 42,000 | 75,000 | 100,000 |
| Maximum Board Size (mm) | 650 × 370 (single/double) | 650 × 560 | 510 × 450 (single lane) | 510 × 450 (approx.) |
| Minimum Board Size (mm) | 50 × 50 | 50 × 50 | 50 × 50 | 50 × 50 |
| Component Height (max mm) | 25 | 25 | 3-10.5 (head dependent) | 3 |
| Smallest Component | 0201 (metric) | 0201 (metric) | 03015 (metric) | 0201 (approx. 0.4×0.2mm) |
| Largest Component (mm) | 74 square / 150×50 | 74 square / 150×50 | 25 square | 5 square |
| Feeder Inputs (max) | 112 | 112 | 76 | 56 (approx.) |
| Placement Accuracy | ±35µm (Cpk ≥1) | ±35µm (Cpk ≥1) | ±40µm (approx.) | High precision (vision) |
| Machine Width (mm) | 1,500 (approx.) | 2,109 | 998 | 998 |
| Head Type | Takumi inline head | Takumi inline head | Parallel rotary heads (P16S) | P20 rotary head |
| SMT Line Equipment List
I.C.T assembles dependable PCBA assembly lines centered on the JUKI SMT equipment for consistent daily performance. Vacuum loaders introduce clean boards from the start. Automatic printers apply paste with exact control. The mounter places every component firmly and true. Multi-zone reflow ovens bond solder evenly and strong. AOI systems inspect closely to catch any flaw early. Conveyors maintain smooth, uninterrupted flow. Yield rises steadily while costs fall away. No unnecessary pauses or rework appear. Lines manage demanding work—automotive power units, LED assemblies, and beyond. Completed boards emerge prepared for final use. I.C.T supports the entire chain from beginning to end.
| Customer Success Video
The video shows a customer laying out their full SMT and DIP lines built for automotive power supply production. The SMT side starts with vacuum loading clean boards, moves through cleaning and precise paste printing, then the JUKI automatic chip mounter places components fast and exact. Boards travel via conveyors to multi-zone reflow soldering, cooling buffers, AOI inspection, and unloading. The DIP process handles wave soldering, board flipping, ICT testing, and secure connections. The footage keeps it real—machines run steady, boards move without jam, placement stays sharp. The customer points out low defects, consistent speed, and quality that holds up to automotive demands. Downtime stays low in regular shifts, proving the line endures the daily push for reliable output.
| Service and Training Support
I.C.T delivers solid, hands-on support for complete factory lines that use JUKI automatic chip mounter machines and other equipment. Engineers go on site for installation and startup work. They run clear training on daily tasks, program setup, maintenance routines, and quick fixes. Remote tools handle problems fast from anywhere. Regular visits keep machines strong over years of hard use. Technical teams help adjust lines for new jobs, better flow, or higher capacity without big stops. With service centers worldwide, help arrives quick no matter the location. This steady backing turns equipment into tough tools that factories rely on for consistent production and long-term endurance.
| Customer Feedback
Customers speak straight about I.C.T engineers who show up ready and fix issues without delay. They praise the JUKI automatic chip mounter for holding strong speed and accuracy through long shifts. Packing comes secure—machines arrive in good shape after long hauls. Questions get answered fast, keeping lines from sitting idle. Many say the full setup runs better than planned, with higher yields and less trouble. Trust grows from reliable gear and people who stand by their word. Factories count on I.C.T as a partner that helps them push through production demands.
| Certifications and Standards
UKI automatic chip mounter machines carry key certifications—CE for European safety rules, RoHS for clean materials, ISO9001 for quality control. Several patents protect placement heads, vision tech, and other core features. These papers show the equipment meets strict global standards for safe, eco-friendly, and consistent work. Factories install them knowing rules stay followed. The certifications prove a serious effort to build durable machines that perform under real conditions without shortcuts.
| About I.C.T Company and Factory
I.C.T runs its own research and development to keep SMT equipment moving forward. The factory stands large, with strict checks at every step from parts in to machines out. Since 2012 the company has grown fast, with many employees and eight branch offices worldwide. It serves over 1600 customers in more than 72 countries. Quality systems track all work so machines hold up in tough daily use. I.C.T gives full factory support—from first plans to later upgrades—helping electronics plants stay strong and efficient across the world.
