English  |
I.C.T-P3
I.C.T
| Quantity: | |
|---|---|
| Simple Start for PCB Assembly Lines
The pcb semi-automatic solder paste screen printer sits first in SMT production lines. It uses Taiwan rails and Japan sensors to keep paste at ±0.05mm so placers get good boards. Two cylinders on rails spread paste flat for no bad joints in ovens. The table with pins holds 0.2-6mm boards and links to belts for fast move to mounters. English screen lets users run half-auto to match line speed. It uses 200W and prints in 8 seconds to keep the Semi-Auto Smt Pcb Printer from slowing the whole SMT line for small LED or sensor jobs.
| Feature
Pins and clamps meet SMEMA rules to join belts from loaders in PCB assembly lines. Taiwan rails and motor change speed to fit mounter needs with no shake. Height knobs set conveyor level quick while sensors see board come for start print. This makes the Solder Paste Screen Printer ready for line in short time and stops paste errors that hurt later steps in SMT production lines.
Cylinders set force for each blade on rails to make 0.01mm thick paste for mounters. Dials pick 0-200mm/sec to go with line rate. Screen saves line plans, checks belt flow and waits if front stops. Good parts like SMC air and Delta drive let the Semi-automatic Solder Paste Screen Printer keep up in PCB assembly lines with few halts.
| Specification
| Model | P3 | P6 | P12 | P15 |
| Accuracy | +/- 0.05mm | +/- 0.05mm | +/- 0.05mm | +/- 0.05mm |
| PCB Size | 300 x 350 mm | 600 x 350 mm | 1200 x 350 mm | 1500 x 350 mm |
| Platform size | 320 x 400 mm | 700 x 400 mm | 1350 x 400 mm | 1650 x 400 mm |
| Stencil Size(mm) | 370*470-550*650 | 370*470-550*650 | 370*470-1500*650 | 370*470-1750*650 |
| PCB Thickness | 0.2 - 6 mm | 0.2 - 6 mm | 0.2 - 6 mm | 0.2 - 6 mm |
| Stencil Positioning | Manual | Manual | Manual | Manual |
| Cycle Time | < 10 Sec. | < 10 Sec. | < 12 Sec. | < 12 Sec. |
| Power Consumption | 200 W | 200 W | 220 W | 220 W |
| Power Supply | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ |
| Air Pressure | 4.5-6 kg/cm | 4.5-6 kg/cm | 4.5-6 kg/cm | 4.5-6 kg/cm |
| Squeegee Speed | 0-200mm/sec | 0-1200mm/sec | 0-200mm/sec | 0-200mm/sec |
| Dimension | 850x750x1650 mm | 1050x750x1650 mm | 1660x750x1650 mm | 2100x750x1650 mm |
| Weight | 280 Kg | 300 Kg | 356 Kg | 430 Kg |
| Squeegee Length | 250mm | 250mm | 250mm | 250mm |
| Platform Height | 950mm | 950mm | 950mm | 950mm |
| Option: Special size can be customized | ||||
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| SMT Line Equipment List
I.C.T High Quality PCBA Production Line features advanced equipment for efficient and precise PCB assembly. The fully automated SMT line includes a loader, an auto printer for accurate solder paste application, a pick-and-place machine for precise component placement, a reflow oven for reliable soldering, and an AOI system for thorough defect inspection. This High Quality PCBA Production Line ensures smooth operation, high reliability, and low-cost SMT assembly, meeting diverse industry requirements.
| Product Name | Purpose in SMT Line |
|---|---|
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
Inspects internal solder joint integrity and detects hidden defects. | |
| SMT Cleaning Machine | Used for cleaning PCBs, stencils, fixtures, nozzles, etc. |
| PCB Cutting Machine | Cut the PCBA into the final product |
| Traceability Equipment | Records and tracks production data: Laser Marking Machine/Label Mounter/Inkjet Printer |
| Customer Success Case Study – Saudi Arabia LED Factory
A Saudi buyer got a full PCB assembly line from I.C.T with the Semi-automatic Solder Paste Screen Printer, JUKI RS-1R mounter and L8 oven for LED bulbs. Our engineers went overseas to the Riyadh plant, joined the printer to belts, set paste for 300mm boards and gave seven days of training on line speed and checks. The SMT production line ran full right away with even paste to placement and no solder problems. The client liked the abroad link help, safe boxes and lessons that got the whole line going fast.
| Global Service & Training Support
I.C.T makes PCB assembly lines easy: free belt plans, test runs before ship, join on site, 7-10 day line classes, first-year parts, always chat or video line help and check visits. Our 20 experts cover 72 countries with 4-hour first talk and 24/7 line call. Every Semi-automatic Solder Paste Screen Printer does line tests and full look in our 12,000m² ISO9001 shop. Users get good flow in SMT production lines, more boards and help that grows.
| Customer Reviews
More than 1600 SMT lines in 72 countries use I.C.T. They like easy belt maps for small space, strong packs for far trips, full classes on line run, quick video fixes for stops and checks that add 15% speed. Shops buy more because line help gives less bad boards, low cost and smooth days for good ties.
| Certifications and Standards
All Semi-automatic Solder Paste Screen Printer have CE, RoHS, ISO9001:2015 and patents. Belt tests and 100% line views fit EU, US and world rules for PCB assembly lines. These show safe paste, no signal mess to other machines, strong join and green use – line safe from start.
| About I.C.T Company and Our Factory
I.C.T began in 2012 and has 12,000m² in Dongguan with 89 people and 20 line pros. We make and check full SMT production lines in ISO9001 ways. Over 1600 lines in 72 countries come from our good prices, fast parts and line fixes. Eight offices and parts keep join help in 48 hours.
| Simple Start for PCB Assembly Lines
The pcb semi-automatic solder paste screen printer sits first in SMT production lines. It uses Taiwan rails and Japan sensors to keep paste at ±0.05mm so placers get good boards. Two cylinders on rails spread paste flat for no bad joints in ovens. The table with pins holds 0.2-6mm boards and links to belts for fast move to mounters. English screen lets users run half-auto to match line speed. It uses 200W and prints in 8 seconds to keep the Semi-Auto Smt Pcb Printer from slowing the whole SMT line for small LED or sensor jobs.
| Feature
Pins and clamps meet SMEMA rules to join belts from loaders in PCB assembly lines. Taiwan rails and motor change speed to fit mounter needs with no shake. Height knobs set conveyor level quick while sensors see board come for start print. This makes the Solder Paste Screen Printer ready for line in short time and stops paste errors that hurt later steps in SMT production lines.
Cylinders set force for each blade on rails to make 0.01mm thick paste for mounters. Dials pick 0-200mm/sec to go with line rate. Screen saves line plans, checks belt flow and waits if front stops. Good parts like SMC air and Delta drive let the Semi-automatic Solder Paste Screen Printer keep up in PCB assembly lines with few halts.
| Specification
| Model | P3 | P6 | P12 | P15 |
| Accuracy | +/- 0.05mm | +/- 0.05mm | +/- 0.05mm | +/- 0.05mm |
| PCB Size | 300 x 350 mm | 600 x 350 mm | 1200 x 350 mm | 1500 x 350 mm |
| Platform size | 320 x 400 mm | 700 x 400 mm | 1350 x 400 mm | 1650 x 400 mm |
| Stencil Size(mm) | 370*470-550*650 | 370*470-550*650 | 370*470-1500*650 | 370*470-1750*650 |
| PCB Thickness | 0.2 - 6 mm | 0.2 - 6 mm | 0.2 - 6 mm | 0.2 - 6 mm |
| Stencil Positioning | Manual | Manual | Manual | Manual |
| Cycle Time | < 10 Sec. | < 10 Sec. | < 12 Sec. | < 12 Sec. |
| Power Consumption | 200 W | 200 W | 220 W | 220 W |
| Power Supply | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ | 1 -PH, 220VAC 50/60HZ |
| Air Pressure | 4.5-6 kg/cm | 4.5-6 kg/cm | 4.5-6 kg/cm | 4.5-6 kg/cm |
| Squeegee Speed | 0-200mm/sec | 0-1200mm/sec | 0-200mm/sec | 0-200mm/sec |
| Dimension | 850x750x1650 mm | 1050x750x1650 mm | 1660x750x1650 mm | 2100x750x1650 mm |
| Weight | 280 Kg | 300 Kg | 356 Kg | 430 Kg |
| Squeegee Length | 250mm | 250mm | 250mm | 250mm |
| Platform Height | 950mm | 950mm | 950mm | 950mm |
| Option: Special size can be customized | ||||
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| SMT Line Equipment List
I.C.T High Quality PCBA Production Line features advanced equipment for efficient and precise PCB assembly. The fully automated SMT line includes a loader, an auto printer for accurate solder paste application, a pick-and-place machine for precise component placement, a reflow oven for reliable soldering, and an AOI system for thorough defect inspection. This High Quality PCBA Production Line ensures smooth operation, high reliability, and low-cost SMT assembly, meeting diverse industry requirements.
| Product Name | Purpose in SMT Line |
|---|---|
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
Inspects internal solder joint integrity and detects hidden defects. | |
| SMT Cleaning Machine | Used for cleaning PCBs, stencils, fixtures, nozzles, etc. |
| PCB Cutting Machine | Cut the PCBA into the final product |
| Traceability Equipment | Records and tracks production data: Laser Marking Machine/Label Mounter/Inkjet Printer |
| Customer Success Case Study – Saudi Arabia LED Factory
A Saudi buyer got a full PCB assembly line from I.C.T with the Semi-automatic Solder Paste Screen Printer, JUKI RS-1R mounter and L8 oven for LED bulbs. Our engineers went overseas to the Riyadh plant, joined the printer to belts, set paste for 300mm boards and gave seven days of training on line speed and checks. The SMT production line ran full right away with even paste to placement and no solder problems. The client liked the abroad link help, safe boxes and lessons that got the whole line going fast.
| Global Service & Training Support
I.C.T makes PCB assembly lines easy: free belt plans, test runs before ship, join on site, 7-10 day line classes, first-year parts, always chat or video line help and check visits. Our 20 experts cover 72 countries with 4-hour first talk and 24/7 line call. Every Semi-automatic Solder Paste Screen Printer does line tests and full look in our 12,000m² ISO9001 shop. Users get good flow in SMT production lines, more boards and help that grows.
| Customer Reviews
More than 1600 SMT lines in 72 countries use I.C.T. They like easy belt maps for small space, strong packs for far trips, full classes on line run, quick video fixes for stops and checks that add 15% speed. Shops buy more because line help gives less bad boards, low cost and smooth days for good ties.
| Certifications and Standards
All Semi-automatic Solder Paste Screen Printer have CE, RoHS, ISO9001:2015 and patents. Belt tests and 100% line views fit EU, US and world rules for PCB assembly lines. These show safe paste, no signal mess to other machines, strong join and green use – line safe from start.
| About I.C.T Company and Our Factory
I.C.T began in 2012 and has 12,000m² in Dongguan with 89 people and 20 line pros. We make and check full SMT production lines in ISO9001 ways. Over 1600 lines in 72 countries come from our good prices, fast parts and line fixes. Eight offices and parts keep join help in 48 hours.
