| Gantry Fastening for Line-Based Assembly
Gantry Conveyor screw Robot Machines are used when electronic products need screw fastening as part of a more organized assembly flow. The machine includes two main parts: an electric screwdriver and an automatic screw feeder. The feeder prepares screws for the driver, and the driver locks each screw at the programmed position. After one screw is finished, the next screw is supplied automatically for the next cycle. This setup helps reduce manual screw handling and keeps fastening work more consistent. It is suitable for PCB assemblies, LED products, control modules, plastic covers, small housings, and production stations that need repeated screw locking.
| Feature of Automatic Screwing Robot
Easy Programming
A gantry structure is useful when screw points are spread across a product surface. Instead of moving the product by hand, the driver moves along the programmed path and reaches each position in sequence. This helps the screw robot keep a cleaner movement route during repeated assembly. The machine uses controlled X, Y, and Z-axis motion, with repeat accuracy up to ±0.02 mm. For products with many fixed screw holes, the gantry design supports better position consistency and reduces the effect of operator hand movement during long production runs.
Some factories do not want a screw station to work like an isolated bench. They want the fastening step to connect with loading, transfer, inspection, or next assembly processes. Gantry Conveyor screw Robot Machines can be considered when the production layout needs better product movement and clearer station control. The machine structure, fixture method, loading direction, and operator position should be planned together. For screwing robot machines used in electronics assembly, the goal is not only to lock screws, but also to make the whole station easier to fit into daily production.
Small screws often create hidden waste in an assembly line. Workers may spend time searching, picking, correcting, or reloading screws before every lock. This machine reduces that work by using an automatic feeder with the electric driver. Once the driver finishes one point and moves up, the next screw can be prepared for the following position. A gantry robot screw station works better when feeding is stable, the bit is matched correctly, and the fixture holds the product firmly. These details help keep fastening work steady during batch production.
Factories often change product models, especially in electronics assembly. Gantry Conveyor screw Robot Machines support touch panel operation and handheld teaching programming, so operators can set screw points and save them as programs. The system can store up to 999 programs, which helps when the same products return to production later. Alarm support, including stripped screw alarm, helps workers notice abnormal fastening conditions earlier. For a gantry robot conveyor screw application, easy program control reduces changeover pressure and helps operators keep the station running with fewer mistakes.
| Automatic Screwing Robot Specification
| Item | I.C.T-SCR300 | I.C.T-SCR540 | I.C.T-SCR640 |
|---|---|---|---|
| Max. Range Size | 300 × 300 mm, Z: 80 mm | 500 × 400 mm, Z: 80 mm | 600 × 400 mm, Z: 80 mm |
| Head Number | 1 | 1 | 2 |
| Platform Number | 1 | 2 | 2 |
| Max Move Speed | X/Y axis: 600 mm/s, Z axis: 400 mm/s | X/Y axis: 600 mm/s, Z axis: 400 mm/s | X/Y axis: 600 mm/s, Z axis: 400 mm/s |
| Screwdriver | SD / KILEWS / HIOS | SD / KILEWS / HIOS | SD / KILEWS / HIOS |
| Screw Feeding | Pick and Place, Magnetic | Pick and Place, Magnetic | Pick and Place, Magnetic |
| Alarm System | Stripped Alarm | Stripped Alarm | Stripped Alarm |
| Repeat Accuracy | ±0.02 mm | ±0.02 mm | ±0.02 mm |
| Memory | 999 Programs | 999 Programs | 999 Programs |
| Programming | Traction Teaching Program | Traction Teaching Program | Traction Teaching Program |
| Driving Mode | Closed-loop Motor | Closed-loop Motor | Closed-loop Motor |
| Control Mode | Demonstrator + Touch Panel | Demonstrator + Touch Panel | Demonstrator + Touch Panel |
| Air Pressure | 4.5–6 kg/cm² | 4.5–6 kg/cm² | 4.5–6 kg/cm² |
| Power Supply | AC 220 ±10%, 50/60 Hz; AC 110V optional | AC 220 ±10%, 50/60 Hz; AC 110V optional | AC 220 ±10%, 50/60 Hz; AC 110V optional |
| Dimension | 670 × 540 × 690 mm | 670 × 590 × 690 mm | 1010 × 730 × 690 mm |
| Weight | Approx. 70 kg | Approx. 90 kg | Approx. 130 kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| DIP Line Equipment List
A full DIP line supports through-hole component assembly after SMT production. It can include manual insertion conveyors, automatic insertion machines, wave soldering machines, selective soldering machines, DIP AOI, soldering robots, PCB loaders, unloaders, cooling conveyors, and other handling equipment. These machines are arranged around component insertion, soldering, inspection, transfer, cooling, and process control. I.C.T plans DIP lines according to PCB size, component type, production output, factory space, and operator arrangement. A clear DIP line layout helps reduce unnecessary handling, keeps each process connected, and makes batch production easier to control.
| Product Name | Purpose in DIP Line |
|---|---|
| Automatic Insert Machine | Automatically places components onto PCBs with precision for DIP production line. |
Melts solder to form solid joints on PCBs during THT plug-in process. | |
Applies solder selectively to specific areas for accurate THT assembly | |
Inspects solder joints and placement defects on DIP assembled PCB. | |
Board input machine and board output machine | |
| DIP Peripheral | Peripheral products of DIP production line |
| Customer Success Video
In April 2026, an I.C.T engineer traveled to Portugal to complete on-site installation and training for a full SMT production line used in automotive electronics. The Customer’s products included car lighting boards and control system PCBAs, so the project required stable machine setup, correct line connection, and clear operator guidance. During the service, our engineer helped with equipment positioning, machine checks, parameter adjustment, operation explanation, and early production support. The Customer gave positive feedback on both the equipment and the training process. They said the setup was smooth and the guidance was clear. This project shows how I.C.T helps Customers turn delivered equipment into real production capacity.
| Professional Training & Support
I.C.T provides support before the machine arrives, during installation, and after production starts. Before recommending equipment, our team can review the Customer’s product size, screw type, working range, fixture need, line direction, output target, and factory space. For Gantry Conveyor screw Robot Machines or complete production line projects, we can support machine selection, layout planning, fixture discussion, utility preparation, and process connection. After delivery, I.C.T engineers can provide on-site installation and training when required. Training covers startup, program teaching, screw feeding checks, fixture loading, alarm handling, daily maintenance, and basic troubleshooting, so the Customer’s team can run the equipment with more confidence.
| Customer Praise
Customers often give positive comments on I.C.T engineers, equipment performance, packaging quality, and response speed. During overseas service, our engineers explain each operation step in simple and practical language, which helps local teams learn faster. Customers also value our export packing method, including moisture protection, shock protection, strong wooden cases, and firm machine fixing for long-distance shipment. After installation, if questions appear, I.C.T supports Customers through messages, video calls, and remote guidance. Fast response helps solve small issues early and keeps production from being delayed.
| Our Certification
I.C.T supports production line projects with CE, RoHS, ISO9001, and related patents, depending on machine type and project scope. These certificates reflect our attention to safety, environmental requirements, quality management, and technical development. Our factory also follows internal inspection steps before shipment. Machines are checked through mechanical assembly review, electrical inspection, function testing, and packaging confirmation. This process helps reduce installation risk and supports stable long-term use for electronics manufacturers building SMT, DIP, assembly, and complete factory production lines.
| About Us and Factory
I.C.T is a manufacturer and full factory solution provider for electronics manufacturing. We have our own R&D, production, engineering, sales, and service teams, and we have grown through many international projects. I.C.T serves Customers in automotive electronics, LED products, consumer electronics, communication devices, industrial control, power electronics, and other fields. Our factory follows strict production and testing procedures from design to shipment. Each project is handled with practical equipment selection, process review, quality inspection, and long-term technical support. I.C.T helps Customers build production capacity step by step with reliable equipment and real factory service.