| Desktop Screw Driving for Small Assemblies
The Fastening Desktop TM Screw Driver Robot is made for factories that need a compact screw locking station for repeated assembly work. Inside the equipment, an electric screwdriver handles fastening, while the automatic screw feeder prepares screws for each cycle. These two working sections reduce hand picking and help operators keep a more regular pace. The system is suitable for electronic boards, plastic covers, LED parts, small instruments, and product housings with fixed screw positions. For factories moving away from purely manual screw tightening, this desktop structure offers a practical step toward cleaner and more stable assembly.
| Feature of Automatic Screwing Robot
Easy Programming
Not every factory wants a large inline automation cell. Many assembly rooms need a smaller station that can sit near existing operators, test benches, or back-end assembly areas. The Fastening Desktop TM Screw Driver Robot answers that need with a compact layout and clear working area. It can support product fixtures without taking too much floor space. For Customers comparing a Screw Driver Robot, the desktop design is useful when the product size is moderate, the screw route is fixed, and the team wants automation without rebuilding the whole workshop.
Loose screws create small problems all day: dropped screws, mixed screws, wrong placement, and slower operator movement. The automatic feeder helps keep the screw supply more organized before each fastening action. Instead of asking workers to pick each screw manually, the Robotic Screw Driver receives screws through the feeding system and continues the locking process at the set points. This is useful for small screws used in electronics, LED assemblies, control modules, and small housings. Better screw handling makes the station cleaner and reduces tiny delays that add up during production.
A desktop robot is valuable when the same product must be assembled again and again. The Fastening Desktop TM Screw Driver Robot uses controlled axis movement to reach saved screw positions. With repeat accuracy up to ±0.02 mm, the system helps keep the driver path consistent across batches. Operators can teach the positions, store the program, and bring it back when the same model returns. This Desktop Robotic Screw Fastening method is especially useful for medium-volume production where stable positioning matters, but full-line automation may not be necessary.
A screw station works better when the fixture, product, screw, and operator movement are planned together. I.C.T can review product samples or drawings before confirming the working range, fixture concept, and driver arrangement. A Robotic Screw Driving Machine may look simple from the outside, but the real result depends on product holding and loading comfort. Some applications need a single platform, while others may need a dual-platform or multi-axis design. For Tm Robot Screw or Locking Screw Robot Multi-Axis Turntable Type projects, layout planning should follow the product process first.
| Automatic Screwing Robot Specification
| Item | I.C.T-SCR300 | I.C.T-SCR540 | I.C.T-SCR640 |
|---|---|---|---|
| Max. Range Size | 300 × 300 mm, Z: 80 mm | 500 × 400 mm, Z: 80 mm | 600 × 400 mm, Z: 80 mm |
| Head Number | 1 | 1 | 2 |
| Platform Number | 1 | 2 | 2 |
| Max Move Speed | X/Y axis: 600 mm/s, Z axis: 400 mm/s | X/Y axis: 600 mm/s, Z axis: 400 mm/s | X/Y axis: 600 mm/s, Z axis: 400 mm/s |
| Screwdriver | SD / KILEWS / HIOS | SD / KILEWS / HIOS | SD / KILEWS / HIOS |
| Screw Feeding | Pick and Place, Magnetic | Pick and Place, Magnetic | Pick and Place, Magnetic |
| Alarm System | Stripped Alarm | Stripped Alarm | Stripped Alarm |
| Repeat Accuracy | ±0.02 mm | ±0.02 mm | ±0.02 mm |
| Memory | 999 Programs | 999 Programs | 999 Programs |
| Programming | Traction Teaching Program | Traction Teaching Program | Traction Teaching Program |
| Driving Mode | Closed-loop Motor | Closed-loop Motor | Closed-loop Motor |
| Control Mode | Demonstrator + Touch Panel | Demonstrator + Touch Panel | Demonstrator + Touch Panel |
| Air Pressure | 4.5–6 kg/cm² | 4.5–6 kg/cm² | 4.5–6 kg/cm² |
| Power Supply | AC 220 ±10%, 50/60 Hz; AC 110V optional | AC 220 ±10%, 50/60 Hz; AC 110V optional | AC 220 ±10%, 50/60 Hz; AC 110V optional |
| Dimension | 670 × 540 × 690 mm | 670 × 590 × 690 mm | 1010 × 730 × 690 mm |
| Weight | Approx. 70 kg | Approx. 90 kg | Approx. 130 kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| DIP Line Equipment List
DIP production covers through-hole component assembly, soldering, inspection, and board handling after the SMT process. A complete line may use manual insertion conveyors, automatic insertion machines, wave soldering, selective soldering, DIP AOI, PCB loaders, unloaders, cooling conveyors, and soldering robots. The right setup depends on component type, PCB size, production quantity, soldering method, and factory layout. I.C.T designs DIP line plans around the whole production route, not only one process. A clear equipment arrangement helps operators move boards smoothly, control soldering quality, and reduce unnecessary handling between stations.
| Product Name | Purpose in DIP Line |
|---|---|
| Automatic Insert Machine | Automatically places components onto PCBs with precision for DIP production line. |
Melts solder to form solid joints on PCBs during THT plug-in process. | |
Applies solder selectively to specific areas for accurate THT assembly | |
Inspects solder joints and placement defects on DIP assembled PCB. | |
Board input machine and board output machine | |
| DIP Peripheral | Peripheral products of DIP production line |
| Customer Success Video
In April 2026, I.C.T completed an on-site service project in Portugal for an automotive electronics Customer. The production line was built for car lighting boards and control system PCBAs, so the project required careful machine setup and practical training for the local team. Our engineer worked at the factory to position equipment, connect the line, check operation status, guide parameter use, and support early production runs. The Customer was satisfied with the smooth installation and clear training process. Their feedback showed that the equipment and service helped the team enter production with fewer questions and better confidence.
| Professional Training & Support
I.C.T treats installation as a production startup task, not only a machine placement job. Before delivery, our team can discuss product size, screw type, fixture concept, working range, output target, and factory space with the Customer. For the Fastening Desktop TM Screw Driver Robot, this helps confirm whether the station should be desktop, dual-platform, or more customized. After shipment, our engineers can provide on-site service when needed. Training covers operation flow, program teaching, fixture loading, feeder checks, alarm response, daily care, and basic troubleshooting. The aim is to help operators understand the equipment through real working steps.
| Customer Praise
Customers usually care about practical details: whether engineers explain clearly, whether packing is safe, whether the machine runs steadily, and whether questions are answered quickly. I.C.T receives positive comments in these areas from many overseas projects. Our engineers train operators with step-by-step guidance instead of only showing buttons. For export shipments, we use moisture protection, shock protection, wooden packing, and firm machine fixing. After installation, the service team supports Customers through messages, video calls, and remote checks, helping small issues get solved before they interrupt production.
| Our Certification
I.C.T provides production line projects with CE, RoHS, ISO9001, and related patent support according to machine type and project scope. These documents reflect our work in safety, environmental requirements, quality management, and technical improvement. Before shipment, equipment also goes through internal checks for mechanical assembly, electrical wiring, functional operation, and packaging condition. This inspection process is important for overseas Customers because it reduces installation risk after arrival. For electronics manufacturing projects, stable quality control is the base for long-term equipment use.
| About Us and Factory
I.C.T is a manufacturer and full factory solution provider for electronics manufacturing. Our team covers R&D, production, engineering, sales, and after-sales service, giving Customers both equipment and project support. Over the years, I.C.T has served Customers in many countries and industries, including automotive electronics, LED products, communication devices, consumer electronics, industrial control, and power electronics. Our factory manages projects through product review, machine selection, production inspection, testing, packing, and technical support. I.C.T focuses on practical solutions that help Customers build stable production capacity and improve factory operation step by step.