| Compact Screw Locking for Electronics
The Automatic Locking Fasten Screw Robot is designed for assembly stations where screws must be fastened in the same positions again and again. Its working system is built around an electric screwdriver and an automatic screw feeder. The feeder prepares the screw supply, while the screwdriver completes the fastening movement on the product. This reduces the need for operators to handle each screw by hand. The machine is suitable for PCB modules, LED assemblies, plastic covers, control boxes, instrument housings, and other small electronic products. For compact production needs, the I.C.T-SCR300 Automatic Screw Robot offers a practical desktop option.
| Feature of Automatic Screwing Robot
Easy Programming
Small screws can make a workstation messy very quickly. They may roll away, mix with other sizes, or slow down the operator before each fastening step. The Automatic Locking Fasten Screw Robot uses an automatic feeder to organize screw supply before the driver moves to the product. This helps the station run with fewer interruptions and less hand movement. As an Automatic Screw Robot, it is useful when one product has several repeated screw points and the factory wants a more stable process than manual tightening.
Before selecting a screw locking robot, the screw map of the product matters. A flat board, a plastic shell, and a narrow housing may all need different loading methods. I.C.T can study the screw locations, product shape, screw access angle, and holding method before building the fixture concept. The Automatic Locking Fasten Screw Robot can then follow the taught fastening path through controlled axis movement. With repeat accuracy up to ±0.02 mm, it helps keep the driver route steady across batch production instead of depending on operator hand control.
Some factories do not need a large automation cell. They need one reliable station near final assembly, test, or packing. A desktop Screw Fasten Robot can fit this type of layout better. The SCR300 model gives a compact working range for small and medium products, while other models can support larger platforms or more output needs. For buyers comparing a Topbest Screw Fastening Robot, the better choice is usually not the biggest machine. It is the one that matches the product size, screw pattern, operator action, and daily output target.
Production teams need a machine that can be used every day without making setup difficult. The Automatic Locking Fasten Screw Robot supports touch panel control and teaching programming, so screw points can be taught and saved. The system can store up to 999 programs, which is helpful for repeat products or mixed batches. Alarm support helps operators notice abnormal conditions such as stripped screws. For a Screw Fasten Drive Robot or Desktop Screw Locking Robot, this kind of control makes product changeover easier and helps new operators learn the process faster.
| Automatic Screwing Robot Specification
| Item | I.C.T-SCR300 | I.C.T-SCR540 | I.C.T-SCR640 |
|---|---|---|---|
| Max. Range Size | 300 × 300 mm, Z: 80 mm | 500 × 400 mm, Z: 80 mm | 600 × 400 mm, Z: 80 mm |
| Head Number | 1 | 1 | 2 |
| Platform Number | 1 | 2 | 2 |
| Max Move Speed | X/Y axis: 600 mm/s, Z axis: 400 mm/s | X/Y axis: 600 mm/s, Z axis: 400 mm/s | X/Y axis: 600 mm/s, Z axis: 400 mm/s |
| Screwdriver | SD / KILEWS / HIOS | SD / KILEWS / HIOS | SD / KILEWS / HIOS |
| Screw Feeding | Pick and Place, Magnetic | Pick and Place, Magnetic | Pick and Place, Magnetic |
| Alarm System | Stripped Alarm | Stripped Alarm | Stripped Alarm |
| Repeat Accuracy | ±0.02 mm | ±0.02 mm | ±0.02 mm |
| Memory | 999 Programs | 999 Programs | 999 Programs |
| Programming | Traction Teaching Program | Traction Teaching Program | Traction Teaching Program |
| Driving Mode | Closed-loop Motor | Closed-loop Motor | Closed-loop Motor |
| Control Mode | Demonstrator + Touch Panel | Demonstrator + Touch Panel | Demonstrator + Touch Panel |
| Air Pressure | 4.5–6 kg/cm² | 4.5–6 kg/cm² | 4.5–6 kg/cm² |
| Power Supply | AC 220 ±10%, 50/60 Hz; AC 110V optional | AC 220 ±10%, 50/60 Hz; AC 110V optional | AC 220 ±10%, 50/60 Hz; AC 110V optional |
| Dimension | 670 × 540 × 690 mm | 670 × 590 × 690 mm | 1010 × 730 × 690 mm |
| Weight | Approx. 70 kg | Approx. 90 kg | Approx. 130 kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| DIP Line Equipment List
DIP production handles through-hole assembly work after SMT placement and reflow. A complete DIP line can include manual insertion conveyors, automatic insertion machines, wave soldering systems, selective soldering systems, DIP AOI, soldering robots, loaders, unloaders, cooling conveyors, and PCB handling equipment. The line layout should follow the real board process, including component insertion, soldering, inspection, cooling, transfer, and final handling. I.C.T designs DIP line plans based on PCB size, component type, production capacity, workshop space, and operator arrangement. Good DIP planning reduces unnecessary board movement and helps each process connect in a more logical order.
| Product Name | Purpose in DIP Line |
|---|---|
| Automatic Insert Machine | Automatically places components onto PCBs with precision for DIP production line. |
Melts solder to form solid joints on PCBs during THT plug-in process. | |
Applies solder selectively to specific areas for accurate THT assembly | |
Inspects solder joints and placement defects on DIP assembled PCB. | |
Board input machine and board output machine | |
| DIP Peripheral | Peripheral products of DIP production line |
| Customer Success Video
In April 2026, I.C.T sent an engineer to Portugal to support the installation and training of a full SMT production line for automotive electronics. The Customer used the line for car lighting and control system PCBAs, so the project required careful setup and clear training for local operators. At the factory, our engineer helped position the equipment, connect the production line, check machine operation, guide parameter use, and support the first production stage. The Customer gave positive comments on the machine performance and the training process. They felt the setup was smooth and the guidance was practical. This project shows how I.C.T helps Customers move from equipment arrival to stable production startup.
| Professional Training & Support
I.C.T begins service work before the machine is shipped. Our team can review product drawings, screw size, fastening points, fixture ideas, output needs, and available factory space. For an Automatic Locking Fasten Screw Robot, this helps confirm the working range, feeding method, platform layout, and fixture structure before production. After delivery, I.C.T engineers can provide on-site support when required. Training covers startup steps, position teaching, program saving, screw feeding checks, fixture loading, alarm handling, basic maintenance, and troubleshooting. The goal is to help the Customer’s team understand the real operating process, not just learn button names.
| Customer Praise
Customers usually judge equipment from daily use, not from brochures. They care about stable operation, safe packing, clear engineer training, and fast answers when problems appear. I.C.T receives strong feedback in these areas from overseas projects. Our engineers explain operation steps in simple language and train operators with real production actions. For export shipment, we use moisture protection, shock protection, wooden packing, and firm machine fixing. After installation, our team supports Customers through messages, video calls, and remote checks to solve issues quickly.
| Our Certification
I.C.T production line projects can be supported with CE, RoHS, ISO9001, and related patents according to machine type and project scope. These documents show our attention to safety, environmental rules, quality management, and technical development. Before shipment, our factory also checks mechanical assembly, wiring condition, machine function, and packing quality. This inspection process helps reduce risk when equipment reaches the Customer’s site. For electronics manufacturers, certification is important, but stable factory testing is what gives the machine better long-term use value.
| About Us and Factory
I.C.T is a manufacturer and full factory solution provider for electronics manufacturing. Our team covers R&D, production, engineering, sales, and after-sales service, so Customers can receive both equipment and project support from one company. I.C.T has served Customers in many countries and industries, including automotive electronics, LED products, communication devices, consumer electronics, industrial control, and power electronics. Our factory manages each project through product review, machine selection, production inspection, testing, packing, and technical support. I.C.T focuses on practical solutions that help Customers build stable production capacity and improve factory operation step by step.