| I.C.T Acrab-Series Flexibility Wave Soldering machine
This Flexibility Wave Soldering machine comes in three widths — 350, 450, 615 mm — so the line always matches production volume. Dual spray, long preheat, ultra-stable dual wave, touchscreen control, and fully modular design let you add nitrogen, top preheat, or electric width adjustment tomorrow without buying a new machine. Operating power settles at 8-10 kW. Tool-free maintenance takes minutes. Customers in 72 countries keep adding options because the base machine never becomes obsolete.
| Feature
You pull the drawer and the entire spray system slides forward. Two Japanese Kuroda nozzles sit there, driven by stepper motors that remember every setting. Flux covers the board evenly, thickness exactly as recorded. Automatic cleaning cycle runs while you watch. 316 stainless steel stays bright. Exhaust stays inside. Push the drawer closed and the Flexibility Wave Soldering machine is ready again.
Three separate zones stretch 1800 mm. Hot air and infrared tubes glow red together. Temperature climbs to 250 ℃ in fifteen minutes. Thick cotton insulation keeps every spot within two degrees. Each zone uses plug-in drawer construction — pull, swap heater, push back in. Optional top preheat module waits above, ready to drop in when thick boards arrive.
The chain moves smooth and quiet. Double-hook titanium fingers close firmly on 615 mm wide panels. Patented entry device guides every board perfectly. Speed holds steady within two millimeters per minute. Fingers clean themselves automatically. Width changes by hand crank or optional motor. The conveyor feeds the Flexibility Wave Soldering machine without ever pausing.
Cast-iron pot with enamel surface holds 500-700 kg lead-free solder. Dual wave rises and falls less than half a millimeter. Automatic dross channel pulls waste away quietly. Optional nitrogen blanket removes oxidation completely. Joints come out bright and full every time. The Flexibility Wave Soldering machine adapts to any process tomorrow.
Top high-power fans start the moment boards leave the wave. Bottom fans can be added in one hour for thick boards. Temperature drops fast. Components feel only gentle air. Solder surface hardens smooth and shiny. Board exits cool to the touch. No thermal damage ever occurs. The Flexibility Wave Soldering machine ends each cycle perfectly.
The touchscreen feels solid under your finger. PC+PLC monitors every temperature in real time. PID+SSR keeps the curve exactly as drawn. When the line slows, standby mode starts and tin stays clean. Full alarm history appears with one touch. Emergency hand crank works even without power. New operators learn the Flexibility Wave Soldering machine in one shift.
| DIP Line Equipment List
| Model | Acrab 350 | Acrab 450 |
| Dimension(mm) | 4420X1420X1750 | 4420X1520X1750 |
| Power Supply | 3P5W,380/220V 50Hz | 3P5W,380/220V 50Hz |
| Startup Power | 33kw | 33kw |
| Operation Power | 8kw | 8kw |
| Control System | PC+PLC | PC+PLC |
| Preheating Zone | 3 | 3 |
| Preheating Length | 1800mm | 1800mm |
| Preheating Temp. | (Room Temperature)-250°C | (Room Temperature)-250°C |
| PCB Width(mm) | 50-350mm | 50-450mm |
| Finger | Spring Pressing Finger (Standard); Option:Spring Pressing Finger, Duck Mouth Finger | |
| Solder Pot Capacity | Lead-free 500kg | |
| Machine Weight(kg) | Approx.1600kg | Approx.1900kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| DIP Line Equipment List
Full Automatic DIP Line with Flexibility Wave Soldering Insertion → loader → Flexibility Wave Soldering machine → unloader → inspection belt. All stations connect perfectly. Production doubles when needed. Modular construction allows easy future upgrades. Global service network keeps the entire line running near 100 % uptime.
| Product Name | Purpose in DIP Line |
|---|---|
| Automatic Insert Machine | Automatically places components onto PCBs with precision for DIP production line. |
Melts solder to form solid joints on PCBs during THT plug-in process. | |
Applies solder selectively to specific areas for accurate THT assembly | |
Inspects solder joints and placement defects on DIP assembled PCB. | |
Board input machine and board output machine | |
| Component Lead Cutting Machine | Peripheral products of DIP production line |
| Customer Success Video
Our engineers flew to Mexico carrying complete tool sets. One automotive electronics customer now solders two different PCBA designs on the same Acrab Flexibility Wave Soldering machine — they simply change fixtures. No bridges form. Fillets look perfect. The same factory runs our coating line and SS-540 selective unit smoothly. They sent us a video full of thanks.
| Expert Services and Training
I.C.T provides installation, operator training, free warranty parts, 24-hour online support, and regular follow-up visits. Twenty experienced engineers worldwide help customers master the Flexibility Wave Soldering machine and reach 99.5 % first-pass yield quickly.
| Customer Testimonials
“Packing is very safe and professional.” “Your engineers are patient and skilled; they solved all problems in two days.” “The wave soldering machine runs stably with almost no dross – real energy saving!” “Response speed is amazing; questions answered within one hour anytime.”
| Quality Certifications
I.C.T Flexibility Wave Soldering machine carries CE, RoHS, ISO9001:2015 and multiple invention patents. Every unit passes strict testing and 72-hour full-load run before delivery.
| About I.C.T Company and Factory
Founded in 2012, I.C.T now has nearly 90 employees and a 12,000 m² modern factory in Dongguan, China. We design and manufacture core components in-house under strict quality control. Serving over 1,600 customers in 72 countries, with eight overseas centers and twenty engineers ready worldwide. We grow together with our partners.