| Desktop Screw Fastening for Electronics Assembly
The Desktop automatic fastening screw robot is built for electronic product assembly where many screws must be locked in repeated positions. The machine includes two main parts: an electric screwdriver and an automatic screw feeder. These two parts work together to send screws and finish locking in one continuous process. After one screw is tightened and the screwdriver lifts, the next screw is supplied automatically. This helps reduce hand work, improve assembly speed, and keep screw locking more stable. It is suitable for PCBA modules, plastic housings, small hardware parts, and products with fixed screw specifications.
| Feature of Automatic Screwing Robot
Easy Programming
The screw feeding system helps the operator avoid repeated screw picking. In normal manual assembly, workers spend time taking screws, positioning them, and checking direction. This machine changes that process by sending the screw to the locking position automatically. A Desktop fastening screw robot can be used when the product has repeated screw points and stable fixture positions. The system supports pick-and-place and magnetic screw feeding options, depending on the screw type and assembly structure. For factories with many similar products, this setup can reduce wasted motion and keep the assembly station cleaner.
The electric screwdriver is the working part that completes the locking action. It works with the screw feeder, fixture, and motion system to tighten screws at the programmed points. For many electronics factories, screw torque, position, and cycle stability matter more than raw speed. This Fixing Locking Driving machine is designed for steady operation, especially when the same screw is used across multiple positions. The machine can be matched with screwdriver brands such as SD, KILEWS, or HIOS. I.C.T can also review the product sample before confirming the suitable locking structure.
Different products need different fixture layouts. Some products only require one platform, while others need two platforms so the operator can load one side while the machine works on the other. The Desktop automatic fastening screw robot can be configured with different working ranges and platform structures. SCR300, SCR540, and SCR640 models support different sizes, head numbers, and production needs. For small electronic assemblies, a compact screw fasten robot may be enough. For larger products or higher output, a dual-platform model can help reduce waiting time and improve the flow of the assembly station.
The machine supports traction teaching programming, touch panel operation, and program storage. Operators can teach screw positions, save product programs, and recall them when the same product returns to production. Up to 999 programs can be stored, which is useful for factories that build several product models. The Desktop automatic fastening screw robot also includes alarm support, such as stripped screw alarm, so the team can find abnormal locking situations faster. For teams comparing a top best screw fastening robot, the real value is not only speed, but also easy setup, stable repeat work, and lower operator pressure.
| Automatic Screwing Robot Specification
| Item | I.C.T-SCR300 | I.C.T-SCR540 | I.C.T-SCR640 |
|---|---|---|---|
| Max. Range Size | 300 × 300 mm, Z: 80 mm | 500 × 400 mm, Z: 80 mm | 600 × 400 mm, Z: 80 mm |
| Head Number | 1 | 1 | 2 |
| Platform Number | 1 | 2 | 2 |
| Max Move Speed | X/Y axis: 600 mm/s, Z axis: 400 mm/s | X/Y axis: 600 mm/s, Z axis: 400 mm/s | X/Y axis: 600 mm/s, Z axis: 400 mm/s |
| Screwdriver | SD / KILEWS / HIOS | SD / KILEWS / HIOS | SD / KILEWS / HIOS |
| Screw Feeding | Pick and Place, Magnetic | Pick and Place, Magnetic | Pick and Place, Magnetic |
| Alarm System | Stripped Alarm | Stripped Alarm | Stripped Alarm |
| Repeat Accuracy | ±0.02 mm | ±0.02 mm | ±0.02 mm |
| Memory | 999 Programs | 999 Programs | 999 Programs |
| Programming | Traction Teaching Program | Traction Teaching Program | Traction Teaching Program |
| Driving Mode | Closed-loop Motor | Closed-loop Motor | Closed-loop Motor |
| Control Mode | Demonstrator + Touch Panel | Demonstrator + Touch Panel | Demonstrator + Touch Panel |
| Air Pressure | 4.5–6 kg/cm² | 4.5–6 kg/cm² | 4.5–6 kg/cm² |
| Power Supply | AC 220 ±10%, 50/60 Hz; AC 110V optional | AC 220 ±10%, 50/60 Hz; AC 110V optional | AC 220 ±10%, 50/60 Hz; AC 110V optional |
| Dimension | 670 × 540 × 690 mm | 670 × 590 × 690 mm | 1010 × 730 × 690 mm |
| Weight | Approx. 70 kg | Approx. 90 kg | Approx. 130 kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| DIP Line Equipment List
Related products for this page are based on the DIP production line. These include insertion lines, automatic insertion machines, selective soldering machines, wave soldering machines, DIP AOI, soldering robots, and handling equipment. Screw fastening is often used after SMT and DIP processes, especially when electronic boards are assembled into housings or finished products. I.C.T can help Customers connect screw locking with the wider production flow instead of treating it as an isolated station. For a full factory project, our team reviews the Customer’s product, process sequence, output target, and floor space before recommending the right equipment combination.
| Product Name | Purpose in DIP Line |
|---|---|
| Automatic Insert Machine | Automatically places components onto PCBs with precision for DIP production line. |
Melts solder to form solid joints on PCBs during THT plug-in process. | |
Applies solder selectively to specific areas for accurate THT assembly | |
Inspects solder joints and placement defects on DIP assembled PCB. | |
Board input machine and board output machine | |
| DIP Peripheral | Peripheral products of DIP production line |
| Customer Success Video
In April 2026, an I.C.T engineer went to Portugal for on-site installation and training for a full SMT production line used in automotive electronics. The Customer’s products included car lighting boards and control system PCBAs, so the production line needed stable setup, clear training, and careful process adjustment. During the service, our engineer supported machine installation, line connection, operation training, and basic production guidance. The Customer gave positive feedback on both the equipment and the training. They also said the setup process was smooth and the explanations were easy to follow. This case shows how I.C.T supports Customers after delivery, especially when a factory needs real production guidance.
| Professional Training & Support
I.C.T supports Customers from early planning to stable production. Before shipment, our team can study the product, screw type, assembly method, fixture needs, and production target. For complete production lines, I.C.T can also support line layout, equipment selection, utility planning, and process connection. After the machines arrive, our engineers can provide on-site installation and training when required. Training usually covers operation, program setup, fixture use, daily maintenance, alarm handling, and common troubleshooting. For a desktop robotic screw fastening station or a complete DIP-related project, our goal is to help the Customer’s team run the equipment with confidence, not only finish installation.
| Customer Praise
Customers often comment on I.C.T’s clear engineering support, stable equipment, careful packaging, and fast response. During overseas projects, our engineers explain each step in a practical way, so local teams can understand the machine faster. Customers also value the way we pack large equipment, using moisture protection, shock protection, wooden cases, and proper machine fixing for long-distance shipment. When questions happen after installation, I.C.T responds quickly through online communication and video support. This helps Customers reduce downtime and keep production moving with less stress.
| Our Certification
I.C.T supports full production line projects with certificates such as CE, RoHS, ISO9001, and related patents, depending on the machine type and project scope. These documents support safety, quality control, environmental requirements, and technical development. More important, I.C.T follows internal inspection steps before equipment leaves the factory. Machines are checked through mechanical assembly review, electrical inspection, function testing, and packing confirmation. For Customers buying a Desktop automatic fastening screw robot or a wider line solution, this quality process helps reduce installation risk and supports long-term factory use.
| About Us and Factory
I.C.T is a manufacturer and full factory solution provider for electronics manufacturing. We have our own R&D, production, engineering, sales, and service teams, and our company has grown quickly through many overseas projects. I.C.T has served a large number of Customers across many countries, covering industries such as automotive electronics, LED, consumer electronics, communication products, industrial control, and power electronics. Our factory uses a clear quality management process from design to testing. For each project, we focus on practical equipment selection, stable production performance, and long-term service support, so Customers can build production capacity step by step.