| PCB Screw Locking for Electronics Assembly
The SMT PCB screw machine is used in electronics assembly when PCB modules, LED parts, plastic housings, or small product frames need repeated screw locking. The machine has two main parts: an electric screwdriver and an automatic screw feeder. The feeder prepares the screw, and the screwdriver finishes the locking action at the set point. After one screw is completed, the next screw is supplied automatically. This helps operators avoid picking screws one by one and keeps the station running in a more organized way. It is suitable for products with fixed screw sizes, repeated holes, and batch production needs.
| Feature of Automatic Screwing Robot
Easy Programming
PCB-related products often need many screws locked in the same pattern. If workers tighten every screw by hand, the result may change with speed, fatigue, and handling habits. This SMT PCB screw machine helps make the fastening step more repeatable by using programmed movement and automatic screw supply. For an SMT PCB screw machine led application, the machine can support LED panels, control boards, light housings, and other assembled parts. I.C.T can review the screw points and product support before confirming the right fixture and working range.
Small screws are easy to drop, mix, or place in the wrong direction during manual assembly. The automatic screw robot reduces this problem by delivering screws through the feeder before each locking cycle. Operators no longer need to touch every screw before tightening, which helps keep the worktable cleaner and the action more consistent. The feeding method can be selected according to screw type and product structure. For high-repeat assembly work, this saves many small movements that usually slow down a workstation.
A screw locking robot must hold the product firmly before the driver moves down. If the PCB, LED frame, or plastic shell is not supported well, the screw may not enter straight. I.C.T can design fixtures according to board size, screw position, product edge, loading direction, and operator habits. Some products need flat support, while others need shaped blocks or positioning pins. This is especially useful for special products such as a spectacle screw locking robot, where the part is small and the locking area must stay steady.
Factories often change products, and a screw station must be easy to adjust. This SMT PCB screw machine supports touch panel operation and handheld teaching programming. Operators can teach screw locations, save programs, and recall them later when the same product returns. The system can store up to 999 programs, which helps with mixed production. Alarm support also helps workers notice abnormal locking, such as stripped screws. For an Automatic SMT PCB spectacle screw locking machine Led project, this program control can reduce setup pressure and make small-batch production easier to manage.
| Automatic Screwing Robot Specification
| Item | I.C.T-SCR300 | I.C.T-SCR540 | I.C.T-SCR640 |
|---|---|---|---|
| Max. Range Size | 300 × 300 mm, Z: 80 mm | 500 × 400 mm, Z: 80 mm | 600 × 400 mm, Z: 80 mm |
| Head Number | 1 | 1 | 2 |
| Platform Number | 1 | 2 | 2 |
| Max Move Speed | X/Y axis: 600 mm/s, Z axis: 400 mm/s | X/Y axis: 600 mm/s, Z axis: 400 mm/s | X/Y axis: 600 mm/s, Z axis: 400 mm/s |
| Screwdriver | SD / KILEWS / HIOS | SD / KILEWS / HIOS | SD / KILEWS / HIOS |
| Screw Feeding | Pick and Place, Magnetic | Pick and Place, Magnetic | Pick and Place, Magnetic |
| Alarm System | Stripped Alarm | Stripped Alarm | Stripped Alarm |
| Repeat Accuracy | ±0.02 mm | ±0.02 mm | ±0.02 mm |
| Memory | 999 Programs | 999 Programs | 999 Programs |
| Programming | Traction Teaching Program | Traction Teaching Program | Traction Teaching Program |
| Driving Mode | Closed-loop Motor | Closed-loop Motor | Closed-loop Motor |
| Control Mode | Demonstrator + Touch Panel | Demonstrator + Touch Panel | Demonstrator + Touch Panel |
| Air Pressure | 4.5–6 kg/cm² | 4.5–6 kg/cm² | 4.5–6 kg/cm² |
| Power Supply | AC 220 ±10%, 50/60 Hz; AC 110V optional | AC 220 ±10%, 50/60 Hz; AC 110V optional | AC 220 ±10%, 50/60 Hz; AC 110V optional |
| Dimension | 670 × 540 × 690 mm | 670 × 590 × 690 mm | 1010 × 730 × 690 mm |
| Weight | Approx. 70 kg | Approx. 90 kg | Approx. 130 kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| DIP Line Equipment List
A full DIP line supports through-hole component assembly after SMT production. It can include manual insertion conveyors, automatic insertion machines, wave soldering machines, selective soldering machines, DIP AOI, PCB loaders, unloaders, cooling conveyors, soldering robots, and related handling systems. These machines are arranged for insertion, soldering, inspection, board transfer, and process control. I.C.T plans DIP lines according to PCB size, component type, product output, factory space, and operator arrangement. A good DIP line layout reduces unnecessary movement, keeps process steps connected, and makes daily production easier to manage.
| Product Name | Purpose in DIP Line |
|---|---|
| Automatic Insert Machine | Automatically places components onto PCBs with precision for DIP production line. |
Melts solder to form solid joints on PCBs during THT plug-in process. | |
Applies solder selectively to specific areas for accurate THT assembly | |
Inspects solder joints and placement defects on DIP assembled PCB. | |
Board input machine and board output machine | |
| DIP Peripheral | Peripheral products of DIP production line |
| Customer Success Video
In April 2026, an I.C.T engineer traveled to Portugal to support a full SMT production line used for automotive electronics. The Customer produces car lighting and control system PCBAs, so the production line needed careful setup, stable machine adjustment, and clear operator training. During the service, our engineer helped with equipment positioning, line connection, operation checks, parameter guidance, and early production support. The Customer gave positive feedback on the equipment and the training process, saying the setup was smooth and the guidance was easy to follow. This project shows how I.C.T supports Customers in real factory conditions, from delivery to working production.
| Professional Training & Support
I.C.T supports Customers before and after machine delivery. Before a project starts, our team can review the product sample, screw size, fastening points, fixture method, production output, factory space, and operator workflow. For a single SMT PCB screw machine or a complete production line, we can provide machine selection, line layout advice, fixture discussion, and process connection support. After delivery, I.C.T engineers can provide on-site installation and training when required. Training covers startup, program teaching, fixture loading, feeder checking, alarm handling, daily maintenance, and basic troubleshooting, so the Customer’s team can use the equipment with more confidence.
| Customer Praise
Customers often give good feedback on I.C.T engineers, machine stability, packing quality, and quick technical response. During overseas service, our engineers explain each step in simple factory language, which helps local teams learn faster. Customers also value our export packing, including moisture protection, shock protection, wooden cases, and firm machine fixing. After installation, if questions appear, I.C.T supports Customers through messages, video calls, and remote guidance. Fast response helps solve small issues early and keeps production from getting stuck.
| Our Certification
I.C.T supports production line projects with CE, RoHS, ISO9001, and related patents, depending on machine type and project scope. These certificates reflect our attention to safety, environmental requirements, quality management, and technical development. Our factory also follows internal inspection steps before shipment. Machines are checked through mechanical assembly review, electrical inspection, function testing, and packing confirmation. This quality process helps reduce installation risk and supports stable long-term use for electronics manufacturers building SMT, DIP, assembly, and complete factory production lines.
| About Us and Factory
I.C.T is a manufacturer and full factory solution provider for electronics manufacturing. We have our own R&D, production, engineering, sales, and service teams, and we have grown through many international projects. I.C.T serves Customers in automotive electronics, LED products, consumer electronics, communication devices, industrial control, power electronics, and other fields. Our factory follows strict production and testing procedures from design to shipment. Each project is handled with practical equipment selection, process review, quality inspection, and long-term technical support. I.C.T helps Customers build production capacity step by step with reliable equipment and real factory service.