| 10 Zones SMT Reflow Oven –Premium SMT PCB Nitrogen Reflow Oven
As one of the most experienced nitrogen reflow oven manufacturers, I.C.T launches the Lyra 10 zones reflow oven – the ultimate SMT PCB Nitrogen Reflow Oven and true 10 Zones SMT Reflow Oven for zero-oxidation, high-reliability production. Ten precisely controlled heating zones, fully sealed nitrogen chamber and German hot-air technology deliver perfect solder joints on automotive electronics, medical devices, 5G base stations, aerospace modules and large industrial boards. Factories worldwide select this 10 Zones SMT Reflow Oven for its unbeatable profile flexibility, minimum nitrogen cost and complete one-stop integration into high-volume SMT lines.
| SMT Reflow Oven Features
Ten top-and-bottom individually controlled heating zones plus two adjustable cooling zones allow engineers to create any sophisticated lead-free profile required by complex SMT PCB Nitrogen Reflow Oven applications. Combined with German heating elements and Siemens precision control, the Lyra 10 zones reflow oven achieves temperature difference ≤ ±1.5℃ and stability above 99.99%, making it the preferred choice among nitrogen reflow oven manufacturers for high-mix, high-density SMT lines.
Completely sealed furnace with intelligent nitrogen recycling at inlet and outlet maintains oxygen concentration below 500ppm from preheating to final cooling while achieving the lowest nitrogen consumption on the market – customer data from nitrogen reflow oven manufacturers proves zero change after years of 24/7 operation. Optional flux management system ensures a clean chamber and oxidation-free results every cycle.
Reinforced parallel rails with optional automatic center support, high-temperature chain and closed-loop speed control (±2mm/min) guarantee ultra-stable transport for single-lane, dual-lane or heavy 450mm boards. Standard SMEMA interface and large touchscreen with real-time oxygen + temperature curves make this 10 Zones SMT Reflow Oven truly plug-and-play in any new or existing SMT production line.
| Reflow Oven Specification
| Model | Lyra 622/622N | Lyra 733/733N | Lyra 933/ 933N |
| Quantity of preheating zones | 6 | 7 | 9 |
| Quantity of peak zones | 2 | 3 | 3 |
| Max. soldering temperature | pre-heating zones 300 °C and peak zones350 °C | ||
| Quantity of cooling zones | 2 | 2 | 3 |
| Mesh Width | Standard 440mm( Option 560 & 680mm ) | ||
| Rail Width | Single Rail: 50 - 460mm, Option: 50 - 686mm other Width on request. Dual Rail Standard: 50 - 290mm*2 | ||
| Dimensions | 5150*1400*1500mm | 6250*1400*1500mm | 6950*1400*1500mm |
| Weight | 2600 kg | 3000 kg | 3400 kg |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| SMT Line Equipment List
Our High Quality PCBA Production Line features advanced equipment for efficient and precise PCB assembly. The fully automated SMT line includes a loader, an auto printer for accurate solder paste application, a pick-and-place machine for precise component placement, a reflow oven for reliable soldering, and an AOI system for thorough defect inspection. This High Quality PCBA Production Line ensures smooth operation, high reliability, and low-cost SMT assembly, meeting diverse industry requirements.
| Product Name | Purpose in SMT Line |
|---|---|
| SMT Line | Turkey Fully Automated Traceable High-End SMT Line. |
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
| Traceability Equipment | Records and tracks production data. |
| PCB Cleaning Machine | Cleans PCB/Stencil to remove flux, dust, and contaminants post-soldering. |
| PCB Cutting Machine | Precision-cuts PCBA outlines and slots with high-speed cutting. |
| SMT Bentop Robot | Automates screw-fastening and soldering for efficient SMT assembly. |
| Customer Success Video
In 2024, a Uruguayan smart-meter producer built a new high-reliability SMT line featuring the Lyra 1022 10 zones reflow oven as the core nitrogen soldering station. Two senior engineers from our nitrogen reflow oven manufacturers team arrived immediately, completed full-line docking, 10-zone profile optimization, nitrogen calibration and operator training within one week. The SMT PCB Nitrogen Reflow Oven now runs 400+mm wide boards 24/7 with zero oxidation defects and outstanding first-pass yield. The customer highly praised our professional turnkey solution and rapid global support.
| Professional Global Training & Support
I.C.T delivers genuine 0-to-1 SMT line partnership: professional layout design, fastest delivery from factory, on-site installation & line integration, in-depth 10-zone nitrogen process training, lifetime spare parts supply and 7×24 remote + on-site support worldwide. Our experienced team flies to your factory the moment you need us, ensuring every 10 Zones SMT Reflow Oven reaches peak performance quickly and operates reliably for decades.
| Customer Feedback
Customers worldwide express strong satisfaction with our comprehensive one-stop turnkey solution, professional global technical support, experienced engineers’ rapid on-site response, extremely stable 10-zone nitrogen performance in SMT lines, careful export packaging that ensures safe long-distance transportation, and 7×24 quick problem-solving capability that effectively guarantees continuous production and maximum uptime.
| Our Certification
Every Lyra 10 zones reflow oven carries CE, RoHS, ISO9001:2015 certificates and multiple invention patents. All units complete strict 48-hour full-load testing and third-party verification in our factory from nitrogen reflow oven manufacturers before shipment, guaranteeing safety, environmental compliance and exceptional durability for customers across Europe, Americas, Asia and the globe.
| About Us and Factory
Established in 2012 with over 25 years of electronics manufacturing experience, I.C.T has become one of the leading nitrogen reflow oven manufacturers and full-line SMT solution providers serving more than 1600 customers in 72 countries. Our 12,000 m² state-of-the-art industrial park integrates independent R&D, precision production and complete quality management systems. A dedicated team of 89 professionals (including 20 senior engineers) and 8 overseas branches guarantee the fastest delivery and localized service worldwide. I.C.T is committed to being the most reliable cross-value platform in global electronic manufacturing.