This Dual-lane SMT Inspection Conveyor is designed to optimize PCB inspection efficiency in modern SMT production lines. By combining a compact footprint with dual-lane transport capability, the system enables manufacturers to handle higher board volumes without expanding factory space. The rigid steel structure and precision rail alignment ensure smooth PCB movement, reducing vibration and misalignment risks during inspection.
| Types of SMT PCB Inspection Conveyor
The dual-lane architecture allows two independent PCB streams to operate simultaneously, significantly increasing line throughput without increasing machine length. This design enables flexible routing, allowing manufacturers to separate product flows, balance production loads, and improve overall inspection efficiency. Each lane operates independently, ensuring stable board spacing and consistent cycle timing, even under high-volume production conditions.
| Feature
The mechanical structure of this system is built using reinforced steel frames and high-precision aluminum rails to ensure long-term operational stability. This heavy-duty construction minimizes vibration, improves load-bearing capacity, and maintains accurate alignment over extended production cycles. Even in high-speed environments, the rigid structure ensures smooth PCB transfer, preventing board damage and mechanical wear.
The system integrates a PLC-based intelligent control platform, providing precise motion control, flexible parameter settings, and stable data communication. Operators can easily configure transport speed, lane operation logic, and board flow management through an intuitive touch-screen interface. This ensures fast setup, simple operation, and rapid adaptation to production changes.
Support for SMEMA and optional Industry 4.0 communication protocols enables seamless data exchange with upstream and downstream equipment. This allows synchronized production coordination, real-time monitoring, and enhanced traceability. Through stable signal transmission and precise sensor feedback, the conveyor ensures accurate PCB positioning and reliable material flow. The intelligent control architecture significantly improves production transparency, reduces manual intervention, and supports digital factory integration.
The conveyor incorporates precision ball screws and wear-resistant transmission components, allowing smooth width adjustment and stable transport performance. Combined with ergonomic design and optimized internal layout, maintenance tasks become easier, while machine uptime is significantly improved. This robust mechanical foundation provides consistent transfer accuracy, long service life, and dependable performance, making it well-suited for continuous industrial operation in demanding SMT production environments.
| SMT Conveyor Specification
| Parameter | Specification |
|---|---|
| PCB Width | 50–400 mm (500 mm optional) |
| Conveyor Height | 900 ± 20 mm |
| Transfer Speed | 0.5–20 m/min adjustable |
| Power Supply | AC 220 V 50/60 Hz |
| Power Consumption | 50–150 W |
| Direction | Left to Right (Right to Left optional) |
| Belt Material | 3 mm ESD flat belt or chain |
| Control Mode | PLC + Touch Screen |
| One-button Width Adjust | Optional (whole line sync) |
| CE Safety Standard | Full cover + sensor protection |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| SMT Line Equipment List
Our High Quality PCBA Production Line features advanced equipment for efficient and precise PCB assembly. The fully automated SMT line includes a loader, an auto printer for accurate solder paste application, a pick-and-place machine for precise component placement, a reflow oven for reliable soldering, and an AOI system for thorough defect inspection. This High Quality PCBA Production Line ensures smooth operation, high reliability, and low-cost SMT assembly, meeting diverse industry requirements.
| Product Name | Purpose in SMT Line |
|---|---|
| SMT Line | Turkey Fully Automated Traceable High-End SMT Line. |
| SMT Conveyor | Automatically transportation bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
| Traceability Equipment | Records and tracks production data. |
| PCB Cleaning Machine | Cleans PCB/Stencil to remove flux, dust, and contaminants post-soldering. |
| PCB Routing Machine | Precision-cuts PCBA outlines and slots with high-speed cutting. |
| SMT Bentop Robot | Automates screw-fastening and soldering for efficient SMT assembly. |
| I.C.T Engineers Support Smart Meter Line in Uruguay
In a recent overseas project, I.C.T engineers deployed this Dual-lane SMT Inspection Conveyor at a customer’s high-volume electronics manufacturing facility. The client required increased inspection capacity without expanding their production floor. By integrating the dual-lane conveyor before AOI stations, the customer achieved balanced material flow and reduced inspection bottlenecks.
| Professional Training & Support
I.C.T provides comprehensive technical service and training programs to ensure smooth equipment deployment and long-term operation. Our engineers support customers through equipment installation, system calibration, operator training, and process optimization. Both on-site and remote service options are available, enabling rapid response regardless of project location.
| Customer Praise
Customers consistently praise the reliability of I.C.T equipment, the professionalism of our engineering teams, and the efficiency of our support services. Many highlight the system’s smooth operation, stable mechanical performance, and accurate inspection transfer capabilities. The careful packaging and secure transportation methods also receive strong recognition, ensuring equipment arrives safely even after long-distance shipping.
| Our Certification
All I.C.T equipment complies with international standards including CE, RoHS, and ISO9001 quality management systems. Our products undergo strict testing procedures covering electrical safety, mechanical durability, and operational stability before shipment. These certifications demonstrate our commitment to manufacturing consistency, safety compliance, and long-term reliability.
| About Us and Factory
I.C.T is a global provider of SMT and PCBA manufacturing solutions, integrating research, development, production, and technical services. With a strong engineering team and advanced manufacturing facilities, we continuously improve product quality and system integration capability. Our factory operates under strict quality control standards, supported by systematic testing and process verification procedures.
Serving customers across more than 70 countries, I.C.T has successfully delivered thousands of SMT production lines and automation systems worldwide. Our rapid growth reflects strong customer trust and sustained technical innovation. By focusing on product reliability, professional service, and long-term cooperation, we help manufacturers build stable, efficient, and future-ready production environments.