The Pcb Stack Chain Assmbly Conveyor does its honest job in the busy assembly line, moving PCBs forward on a strong chain that grips firmly and stacks them one upon another without a slip or tumble. It takes boards from earlier stations, carries them along with quiet purpose, and builds neat piles ready for the next step. Upgraded parts—thick aluminum rails, precision screws, solid base—keep everything steady even when the line runs hour after hour. Width adjusts with a single touch across the whole line; belt or chain chosen as needed. In factories where every board counts, this conveyor becomes a faithful helper, reducing tired hands, cutting mistakes, and letting production hum along day after day.
| Types of SMT PCB Inspection Conveyor
| Feature
Aluminum rails stand tall and straight, guiding boards into the chain without a waver. Thicker base plates sit firm on the floor, precision screws hold tight through long shifts. Ergonomic touches make cleaning and checks easy; all follows ISO and CE rules. The chain system pulls heavy stacks without complaint, lasting years with only simple care.
Sensors keep a steady eye on each board and stack, signaling when to move or pause. Tower lights shine bright—green for go, red for stop—easy to see from anywhere. High-frequency buttons work reliably under busy fingers. ESD protection guards sensitive boards from harm. Wiring stays neat and safe from dust. The system runs without fuss in the busiest shops.
The 7-inch screen shows speed, position, and stacking in simple view. PLC directs every motion without confusion. Operators change settings quick; Industry 4.0 option connects to other machines when wanted. Free updates come remotely, keeping everything up to date. Controls stay easy for new hands yet strong for big lines.
Chain drive grips boards and stacks firmly, moving them even when heavy. Belt option serves lighter work quietly. Both work smoothly with stacking. Switching types takes little time on site. The chain keeps boards safe and production moving without delay.
| SMT Conveyor Specification
| Parameter | Specification |
|---|---|
| PCB Width | 50–400 mm (500 mm optional) |
| Conveyor Height | 900 ± 20 mm |
| Transfer Speed | 0.5–20 m/min adjustable |
| Power Supply | AC 220 V 50/60 Hz |
| Power Consumption | 50–150 W |
| Direction | Left to Right (Right to Left optional) |
| Belt Material | 3 mm ESD flat belt or chain |
| Control Mode | PLC + Touch Screen |
| One-button Width Adjust | Optional (whole line sync) |
| CE Safety Standard | Full cover + sensor protection |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
| SMT Line Equipment List
Our High Quality PCBA Production Line features advanced equipment for efficient and precise PCB assembly. The fully automated SMT line includes a loader, an auto printer for accurate solder paste application, a pick-and-place machine for precise component placement, a reflow oven for reliable soldering, and an AOI system for thorough defect inspection. This High Quality PCBA Production Line ensures smooth operation, high reliability, and low-cost SMT assembly, meeting diverse industry requirements.
| Product Name | Purpose in SMT Line |
|---|---|
| SMT Line | Turkey Fully Automated Traceable High-End SMT Line. |
| SMT Conveyor | Automatically transportation bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
| Traceability Equipment | Records and tracks production data. |
| PCB Cleaning Machine | Cleans PCB/Stencil to remove flux, dust, and contaminants post-soldering. |
| PCB Routing Machine | Precision-cuts PCBA outlines and slots with high-speed cutting. |
| SMT Bentop Robot | Automates screw-fastening and soldering for efficient SMT assembly. |
| I.C.T Engineers Support Smart Meter Line in Uruguay
Two I.C.T engineers set off for Uruguay, arriving at the smart meter factory ready to lend a hand. The customer had ordered magazine loader, printers 471 and 481, Lyra622 mounter, AOI, turning conveyor, reflow oven W2, several Pcb Stack Chain Assmbly Conveyors, magazine belt lines, roller lines, and bull-eye workstations. In one week they set everything up, tuned the chain and stacking, trained operators with care and patience, tested the line thoroughly. Boards now stack neatly, production runs steady. The manager spoke warmly of the conveyor's honest work and the engineers' kind, thorough help.
| Professional Training & Support
I.C.T stands by customers from first plan to full run. Training comes on site or online, given with patience. Software updates stay free always. Remote help answers day and night. Engineers fly out within forty-eight hours when needed. Spare parts wait in eight warehouses worldwide. We stay until the line runs happy and true.
| Customer Praise
“The Pcb Stack Chain Assmbly Conveyor stacks boards perfect—no trouble.”
“Engineers worked patiently and explained everything clear.”
“Packing was strong; machines arrived safe and sound.”
“Support comes fast, even on weekends.”
“Good gear and kind people—we're pleased.”
| Our Certification
Every machine carries CE, RoHS, and ISO9001 marks, plus many patents from careful work. Each Pcb Stack Chain Assmbly Conveyor passes forty-eight hours of full testing before shipping. These papers show honest quality, not chance.
| About Us and Factory
Since 2012, I.C.T has grown to nearly ninety good folks in a modern twelve-thousand square meter factory in Dongguan, China. We do our own research, design, and building with strict checks every step. Over sixteen hundred customers in seventy-two countries trust our work each day. Eight offices overseas help us grow steady. We make reliable Pcb Assembly Conveyor lines and give honest service to all.