| Clear Marks on PCB Every Time
This carton box laser printing machine puts barcodes, QR codes, text, graphics right on PCBs for SMT work. It joins assembly lines easy and sends data to MES systems live. Models handle boards up to 510×460 mm. Precision stays at ±0.05 mm. Choose UV, green, fiber, or CO₂ laser for your material—FR4, metal traces, plastic, sensitive coatings. The 3d auto focus dynamic laser marking machine keeps focus sharp without hand work. No supplies used, no reprint mistakes, cleaner shop floor. It meets rules for tracking products in real production. Factories run smoother, costs drop, quality holds steady.
| Feature
Driving System That Lasts
Arch bridge holds the structure firm. Ball screws and good guides take the load. Two servo motors run X and Y separate. Each move stays exact. Tank chains bend clean, profiles keep them steady. Dust cover blocks dirt, cuts cleaning time. In long factory shifts this setup works without much trouble. Parts wear slow. Position stays true. Maintenance stays low. Workers trust it day after day.
Marking System You Count On
Pick the laser that fits—UV, green, fiber, CO₂. Each one runs stable, lasts long, focuses tight. Factory sets the focus before it ships. No need to adjust. Z axis moves by itself. Cooling fits the laser type. Different beams work on hard surfaces or tight spots. Marks come out clear every board. Line runs full speed, no stops for bad marks.
Transport That Handles Boards Right
Flip sits inside for double-sided work. Rails split in sections. ESD belts stop static harm. Synchronous belts run at set speed. Tension devices hold them even. Ball screws adjust width straight. Cylinder stops set position fine. Boards move without scratch or jam. Path stays safe. Flow matches the line.
Control System Built Simple
Wiring runs clean and marked. Easy to check or fix. Servo drives keep motion steady. Air cools the parts natural. Our board runs without much fault. Safety switch cuts power if needed. Meets CE, UL rules. In real plants it keeps going, few surprises.
Operator Screen That Works Easy
Steps show plain on screen. New people learn quick. Windows holds many jobs. Change products fast. Scan fills frame, shows layout direct. Camera lines up coaxial. No extra steps. Ports fit MES standard or custom. Operators run boards, not fight software.
| Specification
| Parameter | I.C.T-400 | I.C.T-460 | I.C.T-510 | I.C.T-510L |
|---|---|---|---|---|
| Max PCB Size | 380 × 380 mm | 510 × 450 mm | 510 × 400 mm | 510 × 460 mm |
| Marking Range | 280 × 380 mm | 460 × 450 mm | 430 × 400 mm | 510 × 460 mm |
| PCB Flip Function | Yes (built-in flipper) | Yes (built-in flipper) | No | No |
| Machine Dimension | 835 × 1488 × 1566 mm | 974 × 1528 × 1616 mm | 1054 × 1568 × 1523 mm | 1054 × 1470 × 1523 mm |
| Machine Weight | 700 kg | 800 kg | 750 kg | 800 kg |
| Marking Precision | ±0.05 mm (same for all) | ±0.05 mm (same for all) | ±0.05 mm (same for all) | ±0.05 mm (same for all) |
| PCB Thickness | 0.5–5 mm (same for all) | 0.5–5 mm (same for all) | 0.5–5 mm (same for all) | 0.5–5 mm (same for all) |
| Marking Speed | <7000 mm/s (same for all) | <7000 mm/s (same for all) | <7000 mm/s (same for all) | <7000 mm/s (same for all) |
| Laser Types Supported | UV, Green, Fiber, CO₂ (same for all) | UV, Green, Fiber, CO₂ (same for all) | UV, Green, Fiber, CO₂ (same for all) | UV, Green, Fiber, CO₂ (same for all) |
| PCB Safety Height | Top <25 mm, Bottom <20 mm (same for all) | Top <25 mm, Bottom <20 mm (same for all) | Top <25 mm, Bottom <20 mm (same for all) | Top <25 mm, Bottom <20 mm (same for all) |
How to choose the Laser：
UV laser (355nm): Best for heat-sensitive PCBs, FR4 solder mask, flexible circuits. Cold marking, minimal damage, high contrast.
Green laser (532nm): Ideal for plastics, silicon wafers, ceramics, reflective coatings. Excellent absorption, ultra-fine marks, low heat impact.
Fiber laser (1064nm): Perfect for metals, copper/aluminum traces, metallic PCBs. Deep, permanent, fast, high-contrast marks.
CO₂ laser (10600nm): Suitable for standard FR4, solder mask, organic coatings. Stable, good contrast, cost-effective for rigid boards.
| Integrated SMT Production Line Solution
I.C.T sets up complete SMT lines for car parts, medical gear, home products. PCB boards loading. Stencil Printer puts paste exact, SPI checks it. Pick and place machine chips fast. Reflow solder ovens solder even across zones. AOI machine finds bad spots early. Conveyors move smooth. Cleaners wash flux off. Paste box warms and stores right. Carton box laser printing machine starts with clear codes. Yield goes high. Defects drop. Cost stays low. I.C.T backs the whole setup.
| Customer Project Case
I.C.T went overseas, installed two SMT lines for a beauty tool maker in North America. FAT passed. Production started clean. Each line had our 3d auto focus dynamic laser marking machine for codes, SMT printer with SPI, Panasonic mounter, Heller oven, AOI, conveyors, PCBA cleaner, auto paste warmer. Engineers set machines, trained people, tuned process. Customer runs steady now, good output, full tracking.
| Global Service and Training Support
I.C.T does install at your place, starts machine, trains your team hands-on. Shows programming, daily care, small fixes. Tunes settings for your boards. After go-live, answers come fast—phone, visit, parts ready. Lines start quick. Stay up long.
| Customer Experience and Operational Benefits
Engineers know their job, explain clear, fix fast during setup. Machine marks steady, fits line easy. Packing holds tight, arrives safe far away. Questions get answered quick, work right. People trust gear and help. Production stays solid.
| Standards, Control and Production Discipline
Machines carry CE for safety, RoHS no bad materials, ISO9001 for quality steps. Patents cover laser and SMT ideas. These show safe, clean, reliable work worldwide.
| About I.C.T Company and Factory
I.C.T has own R&D and factory in Dongguan, China. 12,000 square meters. 89 people work there, 20 engineers. Started 2012, grew fast. Helps over 1,600 customers in 72 countries. Strict checks every step. Quality system full. Plans factories, sends machines, trains teams, tunes lines. Customers start strong, grow steady.