| Reliable PCB SMT Pick and Place Machine
Hanwha’s PCB SMT Pick and Place Machine stands tough in factories that never sleep. All models carry the same solid basics: vision that catches parts in flight without slowing down, feeders that run electric or pneumatic together to use old stock and save cash, and straightforward software anyone can handle quick. They take on any board size or component with tight control. I.C.T moves these dependable machines to customers, taking care of line design, setup, and hands-on training so production starts clean and stays strong no matter the country.
| Model Introduction
Speed King: SM471Plus
The SM471Plus packs one gantry and ten spindles per head to push 78,000 CPH when everything lines up right. Flying vision nails small 0402 chips at ±40µm and ICs at ±50µm. High-volume shops building phones or gadgets grab this automatic smt pick and place machine for nonstop runs. Standard boards go 510x460mm, with options for bigger jobs when the order calls for it.
Solid All-Purpose: SM481Plus
SM481Plus runs one gantry with six spindles each head for steady 40,000 CPH on parts reaching 42mm. Stage vision tightens IC placement to ±30µm. Car and appliance builders pick this PCB SMT Pick and Place Machine for lines that switch part sizes daily. Single-lane mode handles long boards up to 1,500mm without breaking stride.
Odd-Job Master: SM482Plus
Six spindles on one gantry drive the SM482Plus to 30,000 CPH even with strange shapes on boards up to 1,200x510mm. Stage vision keeps ICs at ±30µm dead on. Lighting and industrial plants use it when parts don’t fit the usual mold and the line can’t afford delays.
Dual-Lane Heavy: DECAN L2
DECAN L2 brings two gantries, six spindles each, for 56,000 CPH across wide parts to 55mm. Flying vision hits ±28µm on tiny chips. LED makers and large-panel lines choose this PCB SMT Pick and Place Machine for dual-lane flow and boards stretching to 1,200mm under heavy daily pressure.
| Specification
| Parameter | SM471Plus | SM481Plus | SM482Plus | DECAN L2 |
|---|---|---|---|---|
| Placement Speed (Optimum) | 78,000 CPH | 40,000 CPH | 30,000 CPH | 56,000 CPH |
| Number of Spindles | 10 Spindles/Head (1 Gantry) | 6 Spindles/Head (1 Gantry) | 6 Spindles/Head (1 Gantry) | 6 Spindles/Head (2 Gantries) |
| Placement Accuracy (Chip) | ±40µm (0402) | ±40µm (0402) | ±40µm (0402) | ±28µm (03015) |
| Placement Accuracy (IC) | ±50µm | ±30µm | ±30µm | ±25µm |
| Component Range | 0402 ~ □14mm (H12mm) | 0402 ~ □42mm (H15mm) | 0402 ~ □55mm (H15mm) | 0402 ~ □21mm (H12mm, up to □55mm opt.) |
| Max PCB Size (Standard) | 510 x 460mm | 460 x 400mm | 740 x 460mm | 510 x 460mm |
| Max PCB Size (Option) | 610 x 460mm | 1,500 x 460mm | 1,200 x 510mm | Up to 1,200 x 460mm |
| Feeder Capacity (8mm) | 120ea | 120ea | 120ea | 120ea |
| Vision System | Flying Vision | Stage Vision | Stage Vision | Flying Vision |
| More SMT Related Products
I.C.T builds complete SMT lines to back any PCB SMT Pick and Place Machine with vacuum loaders that wipe boards clean, printers that drop paste exactly where needed, multi-zone reflow ovens that forge strong joints, and AOI units that spot trouble fast. Every piece connects tight for unbroken runs. The full system lifts good output, slashes scrap, and holds firm in automotive, medical, lighting, and consumer plants. Boards come out ready for the street, and we cover planning and support from the first call to daily operation.
| Product Name | Purpose in SMT Line |
|---|---|
| SMT Line | Turkey Fully Automated Traceable High-End SMT Line. |
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| Inspection Machine | SMT inspection devices like AOI, SPI, X-ray, and stencil inspecter. |
| Traceability Equipment | Records and tracks production data. |
| Customer Success Video
Two I.C.T engineers landed in Tajikistan to kick off an LED operation. The deal included two full SMT lines running multiple PCB SMT Pick and Place Machines, plus DIP, coating, dispensing, and complete LED bulb assembly lines. Video shows crates rolling in safe, machines going together smooth, local crews learning step by step, and lines turning out every kind of LED bulb clean and fast. The owner finished with straight praise for quick launch and top-grade results.
| Service and Training Support
I.C.T wraps full service and training around every PCB SMT Pick and Place Machine. We size up your needs, map the line, handle shipping, build it on site, and train your people direct. Engineers hit the road anywhere for fixes or advice. Ongoing work tunes processes and adds upgrades to keep output high and breakdowns rare.
| Client Testimonials
Customers talk straight about I.C.T engineers being sharp and steady on the job. They bank on the PCB SMT Pick and Place Machine for day-in, day-out reliability. Packing stands up to rough shipping, and answers come back fast. Training gets crews placing perfect boards quick with almost no waste.
| Certifications and Standards
I.C.T carries the main global marks that mean business: CE for safe running, RoHS for clean materials, ISO9001 for tight control. Patents lock down our own smart ideas in SMT gear. All this backs every automatic smt pick and place machine and service with hard international rules on quality, safety, and green practice.
| About I.C.T Company and Factory
I.C.T runs its own research, development, and build centers in China with 89 hands on deck, 20 of them engineers. We took off fast after starting in 2012. Now more than 1600 customers in 72 countries run our full electronics solutions. Every factory step follows strict checks and quality rules so solid machines reach far plants ready to work.