| Controlled Depaneling for V-Groove PCBs
A V-cut PCB Depaneling Machine is used to separate panelized PCBs by following pre-formed V-grooves after soldering processes. During PCB production, uncontrolled breaking can introduce stress that affects solder joints and nearby components. This machine applies guided cutting force to ensure predictable and repeatable separation results. It is commonly positioned after reflow or wave soldering and before final assembly. The equipment is widely used in LED lighting, power electronics, and general PCBA manufacturing where board integrity and edge quality are critical.
Function and application overview:
Separates PCB panels into individual boards;
Installed after soldering and inspection stages;
Applied in LED lighting and standard PCBA production.
| Feature
Multi-Blades LED Separator
The Multi-Blades LED Separator is designed to reduce cutting stress on long and narrow PCB panels. By using several circular blades positioned along the V-groove, cutting force is shared evenly across the panel. This helps prevent bending and cracking, especially on LED strip and light bar boards. Blade spacing can be adjusted according to panel width, allowing the machine to handle different PCB formats. This type of separator is commonly used in LED production lines where stable cutting quality and board flatness are important.
Guillotine Type V-Cut Machine
The Guillotine Type V-Cut Machine separates PCB panels through a vertical cutting motion. The blade applies direct force along the V-groove, making it suitable for thicker boards or deeper groove designs. The rigid structure keeps the blade alignment stable during operation, ensuring straight separation lines. This machine is often chosen when cutting strength and structural stability are required, such as in power electronics and industrial control boards.
Move-Blade (Sliding) V-Cut Machine
The Move-Blade V-Cut Machine uses a sliding blade that moves gradually along the groove path. This cutting approach spreads force over the entire length of the board instead of concentrating it at one point. As a result, sudden impact is reduced and components close to the cutting line are better protected. Adjustable blade height allows the machine to adapt to different PCB thicknesses, making it suitable for mixed-product production lines.
| Specification
| Parameter | Manual Single-Blade V-cut Machine | Multi-Blades LED Separator | Guillotine Type V-cut Machine | Move-Blade (Sliding) V-cut Machine | Multi Group Blades PCB V-cut Machine |
|---|---|---|---|---|---|
| Operation Type | Manual (hand sliding) | Manual (hand push) | Manual (pneumatic foot switch) | Manual (adjustable sliding) | Manual (multi-group push) |
| Blade Setup | 1 circular + 1 straight blade | 6 circular blades (3 groups top/bottom) | Single straight guillotine blade | 1 circular + 1 straight (adjustable gap) | Multiple groups of circular blades (custom multi-knife) |
| PCB Length | 0–350 mm | Unlimited (with 1.2m / 2.4m platforms) | 0–330 mm | 0–350 mm (typical) | Unlimited or very long (platform-dependent) |
| PCB Thickness | 0.8–5 mm | 0.2–5 mm | 0.3–5 mm | 0.8–5 mm | 0.2–5 mm (typical for multi-group) |
| Cutting Method | Single pass sliding | 3-phase (40% + 40% + 20%) | One-shot downward cut | Single pass with adjustable depth | Multi-group sequential cutting |
| Best Application | General PCBs, prototypes, medium volume | Long LED strips, aluminum PCBs, high-volume LED | FR4 boards, clean/dust-free edges | Mixed components, flexible V-depth | Extra-long or wide PCBs, high-efficiency separation |
| SMT Line Equipment List
I.C.T puts together full SMT lines that link loaders, printers, mounters, reflow ovens, AOI units, conveyors, and aluminum PCB cutting machine sections into one working system. Everything matches up right. When space runs tight, U-shaped layouts use the floor well without losing flow. The whole setup raises output, cuts mistakes, and delivers steady quality for automotive parts, LED products, and everyday electronics. Customers get help from start to finish—planning the line, setting it up, and tuning it so production runs smooth and strong from the first day onward.
| Product Name | Purpose in SMT Line |
|---|---|
| SMT Line | Turnkey Ful-auto SMT assembly line |
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| Customer Success Video
In early 2025, an automotive electronics manufacturer worked with I.C.T to install a complete SMT production line that included PCB depaneling equipment. Due to limited workshop space, the line was designed in a compact U-shaped layout. I.C.T engineers handled installation and provided hands-on training for machine operation and process adjustment. After commissioning, the depaneling process operated smoothly, supporting stable production and consistent quality throughout daily operation.
| Service and Training Support
I.C.T provides comprehensive support throughout the entire equipment lifecycle. Before delivery, engineers assist customers in selecting suitable depaneling solutions based on PCB design and production needs. During installation, on-site guidance ensures proper setup and safe operation. Training focuses on operating procedures, cutting parameter adjustment, and routine maintenance. After production starts, technical support and spare parts services help customers maintain long-term production stability.
| Customer Feedback
Customers often share positive feedback regarding both I.C.T equipment and service quality. Many emphasize the stable depaneling results and solid mechanical structure of the machines. The packaging quality is also frequently praised, as it protects equipment during long-distance transportation. Customers appreciate the fast and professional response from I.C.T engineers when technical issues arise, helping them minimize downtime and keep production running smoothly.
| Certifications and Standards
I.C.T PCB depaneling machines are manufactured according to international standards. Equipment complies with CE safety requirements and meets RoHS environmental regulations. Production management follows ISO9001 quality systems to ensure consistency and traceability. In addition, I.C.T holds multiple patents related to PCB cutting mechanisms and machine structure. These certifications reflect I.C.T’s commitment to safety, reliability, and continuous improvement.
| About I.C.T Company and Factory
I.C.T is a professional supplier of electronics manufacturing solutions, providing equipment for SMT, DIP, PCB depaneling, assembly, inspection, and smart factory integration. Serving industries such as LED lighting, automotive electronics, and industrial control, I.C.T focuses on practical and scalable production systems. With in-house manufacturing and testing facilities, each machine is carefully inspected before shipment. A global service network supports customers from installation to long-term operation.