| Pcb Automatic V-Cut Machine – Steady Separation for Quality Work
In the busy world of electronics assembly, where every board must come apart cleanly and without harm, the Pcb Automatic V-Cut Machine proves itself a most trustworthy companion. It keeps the printed circuit board fixed and unmoving while the cut takes place, sparing components from any sudden shock or strain. The operator guides the blade at a pace of his own choosing, adjusting the speed by hand with perfect ease.
The gap between the round upper blade and the straight lower one may be set exactly to match the depth of the V-groove, and even when parts stand astride that line, no injury comes to them. Best of all, the force within the board stays small, so solder joints escape the cracks that so often follow rougher methods. When set beside a Guillotine Type PCB V-cut Machine, which brings its own force in a single mighty stroke, this V-cut path scatters far less dust, builds up little heat, and asks for simpler care, making it the wiser choice for those who wish their work to proceed smoothly, cleanly, and with lasting satisfaction.
I.C.T keeps in store five varieties of V-cut machines, each one shaped to answer the needs of different shops and tasks:
The plain manual sort serves well for smaller lots at modest cost.
The multi-blades pattern takes special care of long LED pieces.
The guillotine kind delivers quick, strong cuts for thicker stock.
The move-blade style offers sliding freedom to suit many grooves.
The multi-knife group manages boards of any length with steady hands.
| Feature
Multi-Blades LED Separator
Here is the multi-blades Pcb Automatic V-Cut Machine, fitted with six round blades divided into three earnest groups that labor together in turn. The work unfolds in three patient steps: the first group takes forty parts in a hundred along the groove, the second follows close behind to claim another forty, and the third finishes what remains in quiet order.
Because each cut covers only a short distance, the strain locked inside the board falls away by eighty parts in a hundred compared with the old single thrust, so that aluminum plates and LED strips keep their true shape and never bend or twist. The blades come from trustworthy makers in Taiwan, serve faithfully more than a full year, and sharpen again and again when worn.
By means of dual-frequency laser measurement, the tip never strays beyond 0.02mm, ensuring every edge remains true and even. Extra platforms of stainless steel stretch to 1.2 or 2.4 meters for longer work, small adjustments raise or lower the blades with care, and custom blocks hold boards of different widths securely. This machine finds its proper place in busy LED factories, where the board must stay flat and the day's output flow without interruption.
Guillotine Type V-Cut Machine
The guillotine Pcb Automatic V-Cut Machine comes forward with a straight, air-driven drop that holds the inner force below 180 parts in a million, so solder joints and close-lying parts suffer no hurt. It cuts clean at the very edge of the V-groove, leaving only 0.3mm between blade and component, while parts as tall as 60mm pass through unharmed.
No spinning wheel turns, no motor hums, and so no dust rises nor carbon settles; the cut leaves hardly a scrap of metal behind. One stroke finishes in a single second at the touch of a foot switch, the blade drawn back safely to keep all in order.
The blade itself withstands more than six million strokes, and a little sanding brings back its sharpness when needed. Those who work with FR4 boards, or in shops where clean air and sharp edges matter greatly, choose this model for its honest speed, its freedom from mess, and its steady protection of every piece that passes beneath it.
Move-Blade (Sliding) V-Cut Machine
With the move-blade Pcb Automatic V-Cut Machine, the workman holds the reins fully, setting the speed of the slide and the space between blades to fit the exact depth of whatever V-groove lies before him. The board stays firm in its place from start to finish, so that tall parts up to 34mm high may cross the line without fear of damage.
This gentle way keeps pressure low, sparing both solder and board from cracks that might otherwise appear. The frame stands solid and true, and blades may be shaped to special wants when the job calls for it. It answers well for shops of middle size, for trial runs of new designs, or for places that seek simple, low-cost separation without complicated machinery.
The man at the bench likes the direct command it gives, letting him meet each board on its own terms and bring forth separations that are clean, careful, and fit for steady daily use.
| Specification
| Parameter | Manual Single-Blade V-cut Machine | Multi-Blades LED Separator | Guillotine Type V-cut Machine | Move-Blade (Sliding) V-cut Machine | Multi Group Blades PCB V-cut Machine |
|---|---|---|---|---|---|
| Operation Type | Manual (hand sliding) | Manual (hand push) | Manual (pneumatic foot switch) | Manual (adjustable sliding) | Manual (multi-group push) |
| Blade Setup | 1 circular + 1 straight blade | 6 circular blades (3 groups top/bottom) | Single straight guillotine blade | 1 circular + 1 straight (adjustable gap) | Multiple groups of circular blades (custom multi-knife) |
| PCB Length | 0–350 mm | Unlimited (with 1.2m / 2.4m platforms) | 0–330 mm | 0–350 mm (typical) | Unlimited or very long (platform-dependent) |
| PCB Thickness | 0.8–5 mm | 0.2–5 mm | 0.3–5 mm | 0.8–5 mm | 0.2–5 mm (typical for multi-group) |
| Cutting Method | Single pass sliding | 3-phase (40% + 40% + 20%) | One-shot downward cut | Single pass with adjustable depth | Multi-group sequential cutting |
| Best Application | General PCBs, prototypes, medium volume | Long LED strips, aluminum PCBs, high-volume LED | FR4 boards, clean/dust-free edges | Mixed components, flexible V-depth | Extra-long or wide PCBs, high-efficiency separation |
| SMT Line Equipment List
I.C.T puts together full SMT lines in which loaders, printers, mounters, reflow ovens, AOI checkers, conveyors, and Pcb Automatic V-Cut Machine units join hands in orderly procession. Every part fits its neighbor, and layouts such as the U-shape make the best of narrow rooms. This complete arrangement lifts the pace of work, cuts down faults, and keeps the quality high across factories making car parts, LED lights, and everyday electronics. Customers find guidance from first plan to final running, so the whole line starts strong and stays strong through many days of honest labor.
| Product Name | Purpose in SMT Line |
|---|---|
| SMT Line | Turnkey Ful-auto SMT assembly line |
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| Customer Success Video
In the opening months of 2025, our engineer Peter set out for Uzbekistan and remained there sixteen full days, giving careful hands to installation and clear teaching at the customer's works. They had ordered a complete SMT line for making motors and fittings for automobiles, with a 5151 automatic printer, a fast mounter, the L8 reflow oven, AOI inspection, NG and OK unloader, BGA repair bench, walk-knife depaneler, paste mixer, translation conveyor, and the rest. The factory room being narrow, I.C.T planned a U-shaped path that used every inch wisely. Peter went through each step with patience, and when he finished, the customer's own people took charge of the machines and set them running steadily without further aid.
| Service and Training Support
I.C.T stands ready with full service and training for every Pcb Automatic V-Cut Machine and the lines that surround it. Our engineers travel to shops far and near, set the machines in place, show their proper working, and teach the hands that will use them day by day. Lessons cover running, cleaning, mending small faults, and improving the flow of work. After the first visit, quick lines stay open—by telephone, letter, or distant sight—so troubles meet swift remedy and the machines keep at their task without long pause. This steady care helps new lines begin well, old ones hold their strength, and every customer finds peace in knowing help is near when wanted.
| Client Testimonials
Folks in many lands speak well of I.C.T engineers, praising their skill, their steady temper, and their willingness to stay until all is right. They hold the Pcb Automatic V-Cut Machine in high regard for its trustworthy ways, its kind treatment of boards, and blades that last long before needing change. Many mention with pleasure the careful wrapping and strong packing that bring the machines whole and ready for work. When questions arise, answers come fast and clear, winning trust that lasts. "Good machines and better help" is what many say, and the words ring true from one side of the earth to the other.
| Certifications and Standards
Every Pcb Automatic V-Cut Machine carries the marks of CE for safety, RoHS for clean materials, and ISO9001 for steady quality, along with several patents that guard our own useful inventions. These signs prove the machines meet strict rules of the world for safe use, kind treatment of nature, and honest workmanship. Shops everywhere take them up with confidence, knowing each one has passed careful trials and stands firm in its duty.
| About I.C.T Company and Factory
I.C.T keeps its own workshops for thinking out new ways and making machines in Dongguan, China, with 89 good hands at work, twenty of them skilled engineers. Since the year 2012 the business has grown strong and steady, now serving more than 1600 customers spread across 72 countries. The place covers 12000 square meters, and every machine passes through strict checks and a full system to keep quality high. We give one complete answer to needs—from first talk and plan, through building and teaching, to keeping things right afterward—so partners in every land may raise their factories, mend them when wanted, and run them well for many years.