The JUKI Pick And Place Machine FX-3RA is designed for electronics factories that need speed, stability, and repeatable placement quality. It is suitable for SMT production lines making control boards, computer-related boards, consumer electronics, communication products, and other PCB assemblies. This model focuses on high-speed component placement, helping factories improve output when the upstream printing process and downstream reflow process are well matched. For customers planning a complete SMT line, FX-3RA can work with loaders, stencil printers, SPI, conveyors, reflow ovens, AOI, and unloading systems. I.C.T helps customers select the right line configuration based on product type, board size, capacity target, and workshop layout.
FX-3RA is a JUKI High Speed Mounter made for fast SMT component placement. In production, the value of speed is not only shown in a catalog number. It also appears in how smoothly the line moves from solder paste printing to component mounting and then to reflow soldering. A fast mounter can help reduce waiting time when the full line is designed correctly. For factories producing large quantities of electronic boards, this kind of placement rhythm is important. It helps operators keep production organized and makes capacity planning easier. When supported by good feeders, clean programs, and stable process control, FX-3RA can become a strong placement section in an SMT line.
As an Automatic SMT Pick And Place Machine, FX-3RA helps reduce manual placement work and supports a more controlled PCB assembly process. Automatic operation is important for factories that want to improve consistency and reduce human errors during production. The machine can follow prepared placement programs and work with feeder systems to mount components onto the PCB at high speed. This is useful for products with many small SMD parts, where manual operation is not practical. In a complete SMT line, automatic placement also helps improve process repeatability. Operators can focus more on material preparation, program checking, inspection feedback, and line maintenance instead of doing unstable manual work.
A JUKI Pick And Place Machine should not be viewed as an isolated machine. Its real value depends on how well it is matched with the full SMT process. If solder paste printing is unstable, placement speed cannot solve the final quality problem. If reflow settings are poor, good placement may still lead to weak solder joints. For this reason, FX-3RA is best planned as part of a complete SMT line. I.C.T can help connect the placement process with printing, SPI checking, reflow soldering, AOI inspection, PCB routing, and cleaning. This full-line view helps customers build a production process that is easier to run, easier to inspect, and easier to improve.
FX-3RA can support high-speed placement for many PCB assembly applications. For electronics factories, stable placement affects more than one process step. It influences soldering quality, AOI inspection results, rework rate, and final product reliability. A High Speed SMT Placement Machine must keep the mounting process consistent while the factory handles different board models and production orders. This is especially important for customers making industrial boards, computer-related products, power control boards, or consumer electronic assemblies. With proper line setup and operator training, FX-3RA can help factories reduce repeated adjustment work and maintain a more predictable production result. Stable output is what makes daily factory operation less painful.
For customers who want to improve SMT output, the JUKI Pick And Place Machine FX-3RA can be used as part of a production upgrade plan. Some factories start with lower-capacity equipment and later need higher placement speed as orders increase. Others may already have an SMT line but want better machine matching and improved line flow. FX-3RA is suitable for customers who focus on fast placement and need a practical solution for SMT manufacturing. I.C.T can review current factory conditions, product range, capacity target, and process bottlenecks before recommending a line plan. This helps customers avoid blind equipment selection and build a more useful production system.
| Specification
| Item/Model | High-Speed Modular Mounter FX-3RAL | High-Speed Modular Mounter FX-3RAXL | |
| Board size | L size(410x360mm) | yes | no |
| L-Wide size(510x360mm)*1 | yes | no | |
| XL size(610×560mm) | no | yes | |
| Applicability to long PWB*1 | 800×360mm | 800×560mm | |
| Component height | 6mm | yes | |
| Component size | Laser recognition | 0402(01005) ~ 33.5mm×33.5mm | |
| Placement speed (chip) | Optimum | 0.040Sec. / chip(90,000CPH)*2 | |
| IPC9850 | 66,000CPH*2 | ||
| Placement accuracy | Laser recognition | ±0.05mm(±3σ) | |
| Feeder inputs | Max.240 in case of 8mm tape (on a Electric double tape feeder) | ||
*1 L-Wide size , Applicability to long PWB is optional. * Contact I.C.T for details. | SMT Line Equipment List
The JUKI Pick And Place Machine FX-3RA can be matched with full SMT production equipment from I.C.T. A standard line may include an SMT loader, automatic stencil printer, SPI machine, PCB conveyor, pick and place machine, Lyra series reflow oven, AOI inspection machine, PCB router, PCBA cleaning machine, and unloader. These machines cover the process from bare PCB loading to solder paste printing, solder paste inspection, component placement, reflow soldering, optical inspection, board separation, cleaning, and final unloading. For a Pick And Place Machine For SMT Line, the surrounding equipment must be selected carefully. A fast placement machine needs the whole process to keep pace, or the line gets bottlenecked fast.
| Customer Success Video I.C.T supported a Customer in Uzbekistan during a large electronics factory project. The factory was built to produce computer motherboards, SSDs, memory-related products, and other electronic assemblies. From early communication to equipment installation, debugging, and production testing, the I.C.T team worked with the Customer’s local engineers to help the SMT and DIP lines enter production. The SMT line included an I.C.T-5151 stencil printer, four SMT placement machines, Lyra series reflow ovens, SPI, AOI, and PCB handling systems. The DIP line included manual insertion, JUKI odd-form insertion equipment, I.C.T-Acrab350 wave soldering, and conveyor systems. After testing, the Customer gave positive comments on service response, line quality, and technical support. | Service and Training Support I.C.T provides service from the complete SMT line perspective. Before a project begins, our team studies the Customer’s product type, PCB size, component range, output target, factory space, power supply, air supply, material route, and inspection needs. This helps build a line plan that fits real production instead of only matching a machine list. After the line reaches the factory, I.C.T engineers can support positioning, connection, process setup, trial production, and operator training. Training can cover solder paste printing, SPI checking, placement preparation, reflow profile control, AOI operation, PCB handling, maintenance habits, and product changeover. This full-process service helps the line move toward stable operation faster. | Customer Feedback Customers often recognize I.C.T because our support continues through the full SMT line startup. During overseas projects, Customers have praised our engineers for clear instruction, patient training, quick response, and practical problem-solving. They also value careful testing before shipment, strong export packaging, and continued communication after production begins. In a complete SMT line, one small issue can affect printing quality, placement stability, soldering results, inspection data, or final output. I.C.T keeps close contact during installation, testing, and early mass production, so the Customer’s team can solve problems faster and understand the line better. This support helps reduce pressure during the first production stage.
| Certifications and Standards I.C.T manages quality through the complete production line delivery process. Our SMT line solutions can support common certification needs such as CE, RoHS, ISO9001, and related patent documents. These documents help Customers review safety, manufacturing control, and quality management before project confirmation. Before shipment, I.C.T checks line equipment, accessories, electrical systems, software status, machine appearance, packaging method, and delivery preparation. For overseas projects, packing and testing are important because the equipment must arrive safely and be ready for installation. A good quality system is not just paperwork. It reduces missing parts, avoids avoidable delays, and gives the Customer a more controlled project handover. | About I.C.T Company and Factory I.C.T is a one-stop factory solution provider for SMT, DIP, coating, dispensing, soldering, inspection, and PCB handling production lines. We have our own R&D, production, engineering, and service teams, so we can support Customers from early planning to real factory operation. Over the years, I.C.T has served more than 1,700 Customers in over 80 countries. Our factory follows strict testing and quality management before delivery, including equipment inspection, process checking, packing review, and shipment preparation. For electronics manufacturers building or upgrading an SMT line, I.C.T can provide line design, equipment matching, installation, training, production testing, and long-term technical support for stable mass production. |