| High Speed Automatic SMT Pick and Place Machine
In this business, time and accuracy pay the bills. The JUKI Pick and Place Machine delivers both, no questions asked. It grabs parts from feeders and drops them exact on PCBs. Modular setup means you add power as jobs grow. Cameras watch every move cold and clear. Programming stays simple, no tricks needed. Narrow frame slips into tight lines. I.C.T handles planning, install, and daily fixes. Factories running automotive or lighting get higher output with less headache. The machine works hard and quiet, turning raw boards into finished product clean and fast.
| JUKI Pick and Place Machine Model Features
RS-1R / RS-1XL Series Features
These handle the mixed jobs. RS-1R pushes 47,000 CPH with ±35µm lock. Boards run 650×370mm standard, RS-1XL takes wider to 650×560mm for big panels. Takumi head shifts quick for odd shapes. 112 feeders keep changeovers short. Force stays gentle on thin boards. Vision spots trouble early. They pair clean with speed units for flexible runs. Operators switch products without losing time. Output holds steady day after day.
RX-7R / RX-8 Series Features
Speed runs the show here. RX-7R hits 75,000 clean, RX-8 climbs straight to 100,000 on the P20 head. Both stay narrow at 998mm wide. Tiny 03015 chips go down perfect. Heads work parallel, no waste. New lighting cuts glare for clear sight. Soft touch saves fragile parts. Machines talk, share marks and stock. You get top parts per square foot. Best for heavy small-chip volume like drivers or phones.
| Specification
| Parameter | RS-1R | RS-1XL | RX-7R | RX-8 |
|---|---|---|---|---|
| Placement Speed (Optimum CPH) | 47,000 | 42,000 | 75,000 | 100,000 |
| Maximum Board Size (mm) | 650 × 370 (single/double) | 650 × 560 | 510 × 450 (single lane) | 510 × 450 (approx.) |
| Minimum Board Size (mm) | 50 × 50 | 50 × 50 | 50 × 50 | 50 × 50 |
| Component Height (max mm) | 25 | 25 | 3-10.5 (head dependent) | 3 |
| Smallest Component | 0201 (metric) | 0201 (metric) | 03015 (metric) | 0201 (approx. 0.4×0.2mm) |
| Largest Component (mm) | 74 square / 150×50 | 74 square / 150×50 | 25 square | 5 square |
| Feeder Inputs (max) | 112 | 112 | 76 | 56 (approx.) |
| Placement Accuracy | ±35µm (Cpk ≥1) | ±35µm (Cpk ≥1) | ±40µm (approx.) | High precision (vision) |
| Machine Width (mm) | 1,500 (approx.) | 2,109 | 998 | 998 |
| Head Type | Takumi inline head | Takumi inline head | Parallel rotary heads (P16S) | P20 rotary head |
| SMT Line Equipment List
I.C.T builds lines that take punishment and keep running. Vacuum loader pulls boards in clean. Printer spreads paste even, no smears. JUKI Pick and Place Machine drops every part dead center. Multi-zone reflow locks solder tight. AOI scans hard for flaws. Conveyors and buffers hold steady flow. Yield climbs, costs drop. No soft spots. These lines stand up to automotive power and lighting work shift after shift. Boards come out ready, and we cover the whole setup.
| Product Name | Purpose in SMT Line |
|---|---|
| SMT Line | Ful-Auto SMT Production Line for Automotive, LED etc |
| PCB Loader | Automatically loads bare PCBs to the line. |
| Solder Paste Printer | Prints solder paste on PCB pads accurately. |
| Pick and Place Machine | Mounts components onto PCBs precisely. |
| Reflow Oven | Melts solder to form solid joints. |
| SMT AOI Machine | Inspects solder joints and placement defects. |
| SPI Machine | Checks solder paste height and quality. |
| Customer Success Video
Customer makes power units for cars. Video walks the floor straight. Boards slide in clean from vacuum loader. Paste prints sharp. JUKI Pick and Place Machine fills them fast and true. Reflow ovens set solder solid. AOI checks every joint cold. Conveyors, cooling, buffers keep pace tight. DIP side runs wave solder for through-hole, flippers turn boards, ICT tests function. Owner talks direct—line stays connected, stops stay rare. Footage runs clear from load to unload. Quality meets tough car rules every time.
| Service and Training Support
I.C.T sends sharp engineers out. They set the JUKI Pick and Place Machine running perfect. Training puts real skills in operators—programming, checks, quick fixes. Remote link solves trouble fast. Regular plans keep machines tight for years. We read whole lines and point smarter runs. Upgrades drop in clean. Offices worldwide mean help hits quick. Production rolls without long blackouts.
| Customer Feedback
Buyers lay it straight. Engineers know the job and fix fast. JUKI Pick and Place Machine earns respect for speed and few breakdowns. Packing holds strong across oceans. Questions get answers same day. Support stays close no matter the miles. Lines run longer, numbers look better. Whole deal—machine and crew—pays off every shift.
| Certifications and Standards
Every JUKI Pick and Place Machine carries real marks. CE clears European safety clean. RoHS keeps materials green. ISO9001 locks quality tight. Patents guard the smart heads and vision. These stamps mean safe for crews, easy on the planet, built to last hard. Buyers sign with no worries.
| About I.C.T Company and Factory
I.C.T runs its own research sharp and steady. Big plants turn ideas into machines with hard checks every step. Crew grows solid, offices spread wide. We back over 1600 shops in 72 countries with full solutions. Growth comes straight from good work. Quality watches close. JUKI Pick and Place Machine ships tough and ready for real floors. We stay in the game worldwide.